Im having a simmliar yet different issue.
On my XFX6870BE core 940 mem 1150,
Catalyst shows minimum memclock 1150
After burner shows minimum memclock 1150.
what the eff?
How can I reduce my mem clock? I am going to assume that they're could be some random bios option? [but i think it would only effect my core(pci-e engine clock override)]
Topic: Afterburner - 5970 - Memory clocks lower than 500Mhz? (Read 7796 times)
Yo nster, thx for the PM, just arrived home. Is there anyway to lower the memory voltage buddy ?
mem voltage idk for sure except through BIOS. Core voltage most likely, depending on your card
just PM me when you are available
Yo nster, thx for the PM, just arrived home. Is there anyway to lower the memory voltage buddy ?
mem voltage idk for sure except through BIOS. Core voltage most likely, depending on your card
Yo nster, thx for the PM, just arrived home. Is there anyway to lower the memory voltage buddy ?
mem voltage idk for sure except through BIOS. Core voltage most likely, depending on your card
Yo nster, thx for the PM, just arrived home. Is there anyway to lower the memory voltage buddy ?
Thanks to nster my system now runs with a lower frequency. As he says, it appears to be a problem with the profile management and changing the values to something different than the loaded profile seems to do the trick.
He has some well earned BTC on the way.
He has some well earned BTC on the way.
I kinda was successful
YAAAAAAAAAAAAAAAAAAYY!!!!!
What happened is that MSIA was fucked up by the multiple GPUs (4) and profiles seemed to not work, so you have to put values that are not in the profile (ie: I put 901 core 350 mem), then once that works, I put 901 core 300 mem and it now works
YAAAAAAAAAAAAAAAAAAYY!!!!!
What happened is that MSIA was fucked up by the multiple GPUs (4) and profiles seemed to not work, so you have to put values that are not in the profile (ie: I put 901 core 350 mem), then once that works, I put 901 core 300 mem and it now works
use AMD GPU Clock Tool, you can directly input ram and gpu speed with it
i haven't seen an update in a while but the latest version supports Cypress gpus
i haven't seen an update in a while but the latest version supports Cypress gpus
I'll let nster give it a shot at getting the clocks down first, but I tried clocktool last week and it couldn't detect any usable hardware (Maybe I got an older version).
use AMD GPU Clock Tool, you can directly input ram and gpu speed with it
i haven't seen an update in a while but the latest version supports Cypress gpus
i haven't seen an update in a while but the latest version supports Cypress gpus
I sent a PM but I guess I'm too late 
Hmm you are offline now @.@ , btw yesterday I can lowered my memory clock to 250Mhz, but for some reason my computer crashed and after that I cant use Msiafterburn to lower the memory again to 250-300 because the lowest it can go is 500 mhz ,
sry worries at home lol... I'm eating right now, so I can take a quick look right now
Hmm you are offline now @.@ , btw yesterday I can lowered my memory clock to 250Mhz, but for some reason my computer crashed and after that I cant use Msiafterburn to lower the memory again to 250-300 because the lowest it can go is 500 mhz ,
Nvm =D
nster's method worked for me. thats why i sent him 2 bitcoins
my 2 5970 are working at 300 MHz.
my 2 5970 are working at 300 MHz.
Thank you very much
nster's method worked for me. thats why i sent him 2 bitcoins
my 2 5970 are working at 300 MHz.
my 2 5970 are working at 300 MHz.
I'll try to be
I get home from work around 8:30PM GMT, will you be available around then? If so, please add me on MSN to make life easy, the email is: [email protected] (And yes it's immature XD)
If you'd like me to look at it, I'll be happy to with Teamviewer
Your method does not work my friend.
doesn't mean I can't help in finding a way to do it
Yeah, is there any other method to do it ? Cause I'm having VDDC temp at 91-93 degree @.@
If you'd like me to look at it, I'll be happy to with Teamviewer
Your method does not work my friend.
doesn't mean I can't help in finding a way to do it
Jump to: