If you'd like me to look at it, I'll be happy to with Teamviewer
Your method does not work my friend.
Topic: Afterburner - 5970 - Memory clocks lower than 500Mhz? - page 2. (Read 7796 times)
Your method does not work my friend.
If you'd like me to look at it, I'll be happy to with Teamviewer
Try downclocking in the mist of the mining process, also dont change too many times cuz afterburner some how resets the mem clock after applying the changes too many times.
from one of my previous posts
Quote
in order to get lower memory clocks please follow this:
1- Open MSI Afterburner
2- Set Memory Clock to the lowest possible or to desired amount
3- Click Apply
4- If Memory Clock is not to the desired amount, close MSI Afterburner
5- Repeat 1 to 4 until desired amount is reached
6- Set Fan Speed
Same can be done to get higher core clocks
Donations are always welcome 167q1CHgVjzLCwQwQvJ3tRMUCrjfqvSznd
1- Open MSI Afterburner
2- Set Memory Clock to the lowest possible or to desired amount
3- Click Apply
4- If Memory Clock is not to the desired amount, close MSI Afterburner
5- Repeat 1 to 4 until desired amount is reached
6- Set Fan Speed
Same can be done to get higher core clocks
Donations are always welcome 167q1CHgVjzLCwQwQvJ3tRMUCrjfqvSznd
I tried this a couple times now but each time I load afterburner 500Mhz is still the lowest value possible, and if I manually enter it it will go right back to 500Mhz.
from one of my previous posts
Quote
in order to get lower memory clocks please follow this:
1- Open MSI Afterburner
2- Set Memory Clock to the lowest possible or to desired amount
3- Click Apply
4- If Memory Clock is not to the desired amount, close MSI Afterburner
5- Repeat 1 to 4 until desired amount is reached
6- Set Fan Speed
Same can be done to get higher core clocks
Donations are always welcome 167q1CHgVjzLCwQwQvJ3tRMUCrjfqvSznd
1- Open MSI Afterburner
2- Set Memory Clock to the lowest possible or to desired amount
3- Click Apply
4- If Memory Clock is not to the desired amount, close MSI Afterburner
5- Repeat 1 to 4 until desired amount is reached
6- Set Fan Speed
Same can be done to get higher core clocks
Donations are always welcome 167q1CHgVjzLCwQwQvJ3tRMUCrjfqvSznd
Can't seem to get afterburner to allow me to clock my memory lower than 500Mhz, although in CCC I can clock it down to 300Mhz (And shave 6c off my VDDC temps too).
Any info greatly appreciated, and just to clarigy my config file is set to allow custom overclocking:
[ATIADLHAL]
EnableUnofficialOverclocking = 1
UnofficialOverclockingEULA = I confirm that I am aware of unofficial overclocking limitations and fully understand that MSI will not provide me any support on it
UnofficialOverclockingMode = 2
AccessibilityCheckingPeriod = 0[/td][/tr][/table]
Any info greatly appreciated, and just to clarigy my config file is set to allow custom overclocking:
[ATIADLHAL]
EnableUnofficialOverclocking = 1
UnofficialOverclockingEULA = I confirm that I am aware of unofficial overclocking limitations and fully understand that MSI will not provide me any support on it
UnofficialOverclockingMode = 2
AccessibilityCheckingPeriod = 0[/td][/tr][/table]
Jump to: