Pages:
Author

Topic: all finished - page 3. (Read 26442 times)

hero member
Activity: 560
Merit: 500
StayFocus and LIVE
April 14, 2014, 02:51:16 PM

Well, stats are having issues per Eligius, their stats system isn't properly working right now due to an all week long DDOS attack.


Waldo,
and what about these two extra Terraminers - as gift for December orders?
(it was planned for March delivery, if I good remember...)

++++1
I would like to know as well Huh
legendary
Activity: 1292
Merit: 1000
April 14, 2014, 06:38:41 AM

Well, stats are having issues per Eligius, their stats system isn't properly working right now due to an all week long DDOS attack.


Waldo,
and what about these two extra Terraminers - as gift for December orders?
(it was planned for March delivery, if I good remember...)
hero member
Activity: 623
Merit: 500
April 13, 2014, 05:48:07 AM
would mining other more profitable coins (eg on multipools) and selling them for bitcoin make sense? I believe this would be more profitable for us.
legendary
Activity: 1292
Merit: 1000
April 11, 2014, 01:47:55 AM

It sure seems to be lately. I've been having to reboot more than regular and notice hash rates slowly drop after a couple of days. This could be the firmware from a week ago. All settings are the same and temps are good. I hope they don't pull a TerraMiner 3 and need an RMA  Undecided


Could you fallback to previous firmware release?
From statistics view - current firmware is terrible...
legendary
Activity: 1292
Merit: 1000
April 10, 2014, 05:11:58 AM
FYI-

wizkid (Eligius pool operator) has been struggling all week with fighting a DDOS attack. Miners have been jumping around and also not showing correct data on the stats. He has stated to ignore all stats and just to verify hashing via cgminer. We're still accepting shares and bouncing between 1.3THs and 1.6THs but as far as the website and stats those will look off until wizkid is able to counter the DDOS.


btw: Do we have any failover pool configured?
hero member
Activity: 560
Merit: 500
StayFocus and LIVE
April 04, 2014, 11:44:43 AM
Bad news! Sad

It looks like TerraMiner #3 is dead.

I haven't checked the stats in about a day or so and when I did I noticed Miner #3 not mining.

Tried to log in via ssh nada, tried to log in via http nada.

Ok- manually rebooted.

No lights but PSU fires.

Swapped power cables and tried again.

Same thing- fans turn on but no LEDS or access via browser.

Swapped cables with a working miner (and swapped outlets that I was plugging into just to verify) - still nothing.

Emailing Cointerra for a support now hopefully they can give us some tips to get it working so we do not have to RMA this =\.

I will keep you guys posted once I receive a reply from CT.


Thanks for the update WH, hopefully they pay for the RMA but if not we will have to divided the cost.
THanks again Smiley

I wish they didn't have a sticker closing the case/lid - I want to take a look inside but that would void the warranty.

I'm hoping/assuming they will send us a prepaid shipping label from UPS, I will be demanding one anyway. This is a TON of downtime if we have to RMA it and i'm more than certain there would be no way WE would have to pay for it.

I shot the email(s) to Cointerra, just awaiting a reply for now. Will keep you guys updated.

any updates on miner #3 Smiley
sr. member
Activity: 543
Merit: 250
March 20, 2014, 03:57:45 PM
I'll take that as a no then...
sr. member
Activity: 543
Merit: 250
March 14, 2014, 04:15:38 PM
Waldohoover,
Now there is merged NMC mining would you like Cointerra shareholders NMC wallet addresses so we can receive payouts for NMC as well??
newbie
Activity: 27
Merit: 0
March 14, 2014, 07:06:28 AM
Looks like it's back online now?
hero member
Activity: 560
Merit: 500
StayFocus and LIVE
March 13, 2014, 11:43:44 AM
Bad news! Sad

It looks like TerraMiner #3 is dead.

I haven't checked the stats in about a day or so and when I did I noticed Miner #3 not mining.

Tried to log in via ssh nada, tried to log in via http nada.

Ok- manually rebooted.

No lights but PSU fires.

Swapped power cables and tried again.

Same thing- fans turn on but no LEDS or access via browser.

Swapped cables with a working miner (and swapped outlets that I was plugging into just to verify) - still nothing.

Emailing Cointerra for a support now hopefully they can give us some tips to get it working so we do not have to RMA this =\.

I will keep you guys posted once I receive a reply from CT.


Thanks for the update WH, hopefully they pay for the RMA but if not we will have to divided the cost.
THanks again Smiley
hero member
Activity: 560
Merit: 500
StayFocus and LIVE
March 11, 2014, 01:19:31 PM

I like Tuesdays Smiley

I remember Miner 2 was working at average 1,6TH/s first, now it is a bit lower, about 1,4TH/s, we can see this in stats yet.
http://eligius.st/~wizkid057/newstats/userstats.php/12ndhaAT4Pbv3gNDZNg3PUiUGG16PB2sGr

There was some upgrade from Cointerra, or maybe some restart is needed?

I've been working with their support and it could be due to the new firmware that they have me on. The machines are quite finicky with setting adjustments- You can reboot it and it will hang, another reboot and it won't save settings etc. I've done 2 reboots today on all machines, temps are good. I may monitor the stats a bit more and compare them to the older ones. Eligius has been having some minor stats issues this week so I'm not sure if that adds to it as well.

Thanks for the update Smiley
legendary
Activity: 1292
Merit: 1000
March 11, 2014, 02:35:09 AM

I like Tuesdays Smiley

I remember Miner 2 was working at average 1,6TH/s first, now it is a bit lower, about 1,4TH/s, we can see this in chart yet.
http://eligius.st/~wizkid057/newstats/userstats.php/12ndhaAT4Pbv3gNDZNg3PUiUGG16PB2sGr

There was some upgrade from Cointerra, or maybe some restart is needed?
full member
Activity: 133
Merit: 100
full member
Activity: 133
Merit: 100
March 10, 2014, 03:29:15 PM

Did you try to find better offer (if I good remember the US energy market is deregulated, especially in comparision to UE market)

If everyone else in the world measures Terraminer and gets only ~2kW - the quite probable explanation,
that your kill-a-watt works improperly. Could you have some multimeter for a while
(e.g. http://img.directindustry.com/images_di/photo-g/analog-power-meters-5231-5940213.jpg
http://techchannel.radioshack.com/measure-amps-watts-multimeter-1243.html )

1390W and 120V (US standard) - it gives ~11,58A for one circuit,
Check current value - you should have rather something similar to Soniq 8,5A...


If not - we have some really crappy Terraminers, and I think this should be documented
and send to Cointerra - just to receive yet another recompensation:
for 150% power consumption in comparision to other Terraminers.


As far as rates, I'm actually looking at office/warehouse space for personal reasons but if the bill fits, I'll relocate miners to this location (which will reduce my kwh rate and your guys's fees). This is not a promise at all since like I stated this is mainly for personal/unrelated business but if I can lower the rates, that would be a win-win.
Well, the fact that almost everyone uses the same meter (and the fact that it reads fine on every other device) leads me to believe it's working fine. I do have another one on its way on to measure both PSUs simultaneously, though.


Hi, Waldo

Still are there any chances for a new location? (with lower energy rates, we hope...)
Did you measure both PSU simultaneously?

Regards
JK

+1  Huh
legendary
Activity: 1292
Merit: 1000
March 10, 2014, 03:32:54 AM

Did you try to find better offer (if I good remember the US energy market is deregulated, especially in comparision to UE market)

If everyone else in the world measures Terraminer and gets only ~2kW - the quite probable explanation,
that your kill-a-watt works improperly. Could you have some multimeter for a while
(e.g. http://img.directindustry.com/images_di/photo-g/analog-power-meters-5231-5940213.jpg
http://techchannel.radioshack.com/measure-amps-watts-multimeter-1243.html )

1390W and 120V (US standard) - it gives ~11,58A for one circuit,
Check current value - you should have rather something similar to Soniq 8,5A...


If not - we have some really crappy Terraminers, and I think this should be documented
and send to Cointerra - just to receive yet another recompensation:
for 150% power consumption in comparision to other Terraminers.


As far as rates, I'm actually looking at office/warehouse space for personal reasons but if the bill fits, I'll relocate miners to this location (which will reduce my kwh rate and your guys's fees). This is not a promise at all since like I stated this is mainly for personal/unrelated business but if I can lower the rates, that would be a win-win.
Well, the fact that almost everyone uses the same meter (and the fact that it reads fine on every other device) leads me to believe it's working fine. I do have another one on its way on to measure both PSUs simultaneously, though.


Hi, Waldo

Still are there any chances for a new location? (with lower energy rates, we hope...)
Did you measure both PSU simultaneously?

Regards
JK
full member
Activity: 160
Merit: 100
March 01, 2014, 05:19:15 PM
Jesus Christ man!  Where do you live?  That power rate is insane.  My power rate is between $0.07 and $0.08 per KWH.  If I had the space, and spare power capacity, to host these, I would tell you to send them to me.
legendary
Activity: 1292
Merit: 1000
March 01, 2014, 07:56:15 AM
- I was mistaken about .31 KwH, it's actually .30 KwH. http://imgur.com/dcGywPf

Did you try to find better offer (if I good remember the US energy market is deregulated, especially in comparision to UE market)

- I was also mistaken about 2900W, it's closer to ~2800W w fluctuation spikes up to 2900W. http://imgur.com/H0B6sld and http://youtu.be/uvVCISb9N14
*Note I'm only measuring half the power consumption with the meter.

If everyone else in the world measures Terraminer and gets only ~2kW - the quite probable explanation,
that your kill-a-watt works improperly. Could you have some multimeter for a while
(e.g. http://img.directindustry.com/images_di/photo-g/analog-power-meters-5231-5940213.jpg
http://techchannel.radioshack.com/measure-amps-watts-multimeter-1243.html )

1390W and 120V (US standard) - it gives ~11,58A for one circuit,
Check current value - you should have rather something similar to Soniq 8,5A...


If not - we have some really crappy Terraminers, and I think this should be documented
and send to Cointerra - just to receive yet another recompensation:
for 150% power consumption in comparision to other Terraminers.
legendary
Activity: 1292
Merit: 1000
March 01, 2014, 07:23:54 AM

No, Dude. You advertised 50GH/s with a 3% hosting fee.
At no point did you say, 'plus electricity fees at the current USD rate'


Revilo, I'm sure if the Terraminer would in reality 2.2TH - you will ask about your 55 GH/s, not 50 GH/s.
So don't insist for this matter - there are others mentioned, more important.

Wrong, I paid for 50GH/s, I expect 50GH/s.

See for all KNCminer shareholders, when Jupiter hashrate was much bigger than announced earlier.
Yes, you would stay stable as rock at first, low hashrate - while rest of shareholders is sharing the extra hashrate gift from KNC.
My hero.
sr. member
Activity: 543
Merit: 250
March 01, 2014, 04:46:22 AM

No, Dude. You advertised 50GH/s with a 3% hosting fee.
At no point did you say, 'plus electricity fees at the current USD rate'


Revilo, I'm sure if the Terraminer would in reality 2.2TH - you will ask about your 55 GH/s, not 50 GH/s.
So don't insist for this matter - there are others mentioned, more important.

Wrong, I paid for 50GH/s, I expect 50GH/s.
Pages:
Jump to: