Hi all,
until now i have used overdriventool for setting up clocks on my amd cards - when rig restarts to windows(i use autostart profile for overdriventool with .bat file), but now i got few vegas and would like to use amdmemorytweaker for v56/v64 with hbm timmings but dont know how to setup autostart .bat file to inject timmngs for amd memorytweaker, can someone please link or write down short guide(step by step) how to do this in win10.
Also i have been reading this thread and it seems to me very confusing(many combos) for hbm timmings, is there like some proven timmings for v56 samsung/v56 hynix/v64samsung that work out of the box without crashing?, i mean i dont care if i have 1-2 mhs lower hashrate, i just want good starting point that is crash free but gives higher hashrate than default factory timmings.
Been using settings/timmings from TRM ethash guide but they are not that stable
tnx
Topic: AMD Mem Tweak XL - Read/modify timings/pp/straps on the fly - page 14. (Read 58827 times)
February 21, 2020, 05:32:29 AM
February 17, 2020, 04:07:22 AM
Guys, I need help with my 8xVega 56 Sapphire Pulse. Samsung memory.
If I try to go any higher on the memory some cards start dropping to 7Mh like this:
https://ibb.co/Qn2WfBs
I know people clock to 1100 and get 50Mh.
Help please!
If I try to go any higher on the memory some cards start dropping to 7Mh like this:
https://ibb.co/Qn2WfBs
I know people clock to 1100 and get 50Mh.
Help please!
Cards drop hashrate when the memory is overclocked too much, since it starts producing too many errors and the computations have to run and rerun, resulting in a lower hashrate.
Just because you have Samsung memory does not mean it WILL clock to 1000+. Its a trial and error thing for each card, some will work, some wont. Its called the silicon lottery, dont push your hardware to breaking point. Also when overclocking, test 25mhz increases and go up stepwise, not directly from 950 to 1025.
Thank you for the info. Yes, I do try at smaller increments!
For me it doesnt make sense to have such a big difference between cards with Samsung memory. So I was asking if I am missing something, maybe I have to tweak DPM and MDPM levels in HIVE OS?
Thanks anyway
February 17, 2020, 02:00:12 AM
Guys, I need help with my 8xVega 56 Sapphire Pulse. Samsung memory. I flashed it to 64 Bios hoping it will allow the memory to go higher.
I am using this for mem tweak and it works well. I get 44Mh at 950mhz
amdmemtweak --CL 19 --RAS 30 --RCDRD 12 --RCDWR 6 --RC 44 --RP 13 --RRDS 5 --RRDL 5 --RTP 4 --FAW 18 --CWL 6 --WTRS 4 --WTRL 9 --WR 15 --WRRD 1 --RDWR 18 --REF 17000 --RFC 248
If I try to go any higher on the memory some cards start dropping to 7Mh like this:
https://ibb.co/Qn2WfBs
I know people clock to 1100 and get 50Mh.
Help please!
I am using this for mem tweak and it works well. I get 44Mh at 950mhz
amdmemtweak --CL 19 --RAS 30 --RCDRD 12 --RCDWR 6 --RC 44 --RP 13 --RRDS 5 --RRDL 5 --RTP 4 --FAW 18 --CWL 6 --WTRS 4 --WTRL 9 --WR 15 --WRRD 1 --RDWR 18 --REF 17000 --RFC 248
If I try to go any higher on the memory some cards start dropping to 7Mh like this:
https://ibb.co/Qn2WfBs
I know people clock to 1100 and get 50Mh.
Help please!
I only have one ref 56 w/ samsung, but use the same clock settings as my 64s (shown above) for ~47 MH/s. I had to change the timings slightly (vs the 64s) to:
--RAS 30 --RC 44 --RP 12 --REF 15600 --RFC 248
For 50MH/s, I would prob have to bump up to 825-850mv, 1107 MHz mclk, and ~1025 MHz cclk (really not worth it if considering mhs/w.)
February 17, 2020, 12:24:40 AM
Guys, I need help with my 8xVega 56 Sapphire Pulse. Samsung memory.
If I try to go any higher on the memory some cards start dropping to 7Mh like this:
https://ibb.co/Qn2WfBs
I know people clock to 1100 and get 50Mh.
Help please!
If I try to go any higher on the memory some cards start dropping to 7Mh like this:
https://ibb.co/Qn2WfBs
I know people clock to 1100 and get 50Mh.
Help please!
Cards drop hashrate when the memory is overclocked too much, since it starts producing too many errors and the computations have to run and rerun, resulting in a lower hashrate.
Just because you have Samsung memory does not mean it WILL clock to 1000+. Its a trial and error thing for each card, some will work, some wont. Its called the silicon lottery, dont push your hardware to breaking point. Also when overclocking, test 25mhz increases and go up stepwise, not directly from 950 to 1025.
February 16, 2020, 03:55:19 AM
Guys, I need help with my 8xVega 56 Sapphire Pulse. Samsung memory. I flashed it to 64 Bios hoping it will allow the memory to go higher.
I am using this for mem tweak and it works well. I get 44Mh at 950mhz
amdmemtweak --CL 19 --RAS 30 --RCDRD 12 --RCDWR 6 --RC 44 --RP 13 --RRDS 5 --RRDL 5 --RTP 4 --FAW 18 --CWL 6 --WTRS 4 --WTRL 9 --WR 15 --WRRD 1 --RDWR 18 --REF 17000 --RFC 248
If I try to go any higher on the memory some cards start dropping to 7Mh like this:
https://ibb.co/Qn2WfBs
I know people clock to 1100 and get 50Mh.
Help please!
I am using this for mem tweak and it works well. I get 44Mh at 950mhz
amdmemtweak --CL 19 --RAS 30 --RCDRD 12 --RCDWR 6 --RC 44 --RP 13 --RRDS 5 --RRDL 5 --RTP 4 --FAW 18 --CWL 6 --WTRS 4 --WTRL 9 --WR 15 --WRRD 1 --RDWR 18 --REF 17000 --RFC 248
If I try to go any higher on the memory some cards start dropping to 7Mh like this:
https://ibb.co/Qn2WfBs
I know people clock to 1100 and get 50Mh.
Help please!
February 12, 2020, 06:23:27 AM
Ugh. Been a TUBE/CCX miner and trying to get ETH to be efficient. I got 4x V64 but all I get is 36MHs each where I've read it is possible to get 50MHs+.
https://git.mmpos.eu/windows/teamredminer/blob/master/ETHASH_GENERAL_TUNING.txt
Upon finding the AMD Memory Tweak XL, I use:
--CL 20 --RAS 30 --RCDRD 14 --RCDWR 12 --RC 44 --RP 14 --RRDS 3
--RRDL 6 --RTP 5 --FAW 12 --CWL 8 --WTRS 4 --WTRL 9 --WR 14
--REF 17000 --RFC 249
I get a crash. I've tried settings individually, no change.
P7 1075 / 850 as suggested or 1408 / 925 shows no change.
P3 1107 / 850 as suggested crashes whereas 945 / 1050 appears to be fine but stuck at 36MHs.
Embarrassingly, my Red Dragon V56s get 39MHs easily without any but P3/P7 and at -50%!
My question is how do I get my V64s tweaked correctly?
https://git.mmpos.eu/windows/teamredminer/blob/master/ETHASH_GENERAL_TUNING.txt
Upon finding the AMD Memory Tweak XL, I use:
--CL 20 --RAS 30 --RCDRD 14 --RCDWR 12 --RC 44 --RP 14 --RRDS 3
--RRDL 6 --RTP 5 --FAW 12 --CWL 8 --WTRS 4 --WTRL 9 --WR 14
--REF 17000 --RFC 249
I get a crash. I've tried settings individually, no change.
P7 1075 / 850 as suggested or 1408 / 925 shows no change.
P3 1107 / 850 as suggested crashes whereas 945 / 1050 appears to be fine but stuck at 36MHs.
Embarrassingly, my Red Dragon V56s get 39MHs easily without any but P3/P7 and at -50%!
My question is how do I get my V64s tweaked correctly?
No-fuss efficient setup I use for 8 nitro 64s:
(actual memtweak params are --RAS 30 --RCDRD 14 --RCDWR 6 --RC 44 --RP 12 --REF 11700 --RRDL 4)
February 05, 2020, 12:23:09 AM
Ugh. Been a TUBE/CCX miner and trying to get ETH to be efficient. I got 4x V64 but all I get is 36MHs each where I've read it is possible to get 50MHs+.
https://git.mmpos.eu/windows/teamredminer/blob/master/ETHASH_GENERAL_TUNING.txt
Upon finding the AMD Memory Tweak XL, I use:
--CL 20 --RAS 30 --RCDRD 14 --RCDWR 12 --RC 44 --RP 14 --RRDS 3
--RRDL 6 --RTP 5 --FAW 12 --CWL 8 --WTRS 4 --WTRL 9 --WR 14
--REF 17000 --RFC 249
I get a crash. I've tried settings individually, no change.
P7 1075 / 850 as suggested or 1408 / 925 shows no change.
P3 1107 / 850 as suggested crashes whereas 945 / 1050 appears to be fine but stuck at 36MHs.
Embarrassingly, my Red Dragon V56s get 39MHs easily without any but P3/P7 and at -50%!
My question is how do I get my V64s tweaked correctly?
https://git.mmpos.eu/windows/teamredminer/blob/master/ETHASH_GENERAL_TUNING.txt
Upon finding the AMD Memory Tweak XL, I use:
--CL 20 --RAS 30 --RCDRD 14 --RCDWR 12 --RC 44 --RP 14 --RRDS 3
--RRDL 6 --RTP 5 --FAW 12 --CWL 8 --WTRS 4 --WTRL 9 --WR 14
--REF 17000 --RFC 249
I get a crash. I've tried settings individually, no change.
P7 1075 / 850 as suggested or 1408 / 925 shows no change.
P3 1107 / 850 as suggested crashes whereas 945 / 1050 appears to be fine but stuck at 36MHs.
Embarrassingly, my Red Dragon V56s get 39MHs easily without any but P3/P7 and at -50%!
My question is how do I get my V64s tweaked correctly?
February 03, 2020, 11:27:09 AM
So.. I guess we'll see 5700 bios modding in the future 
https://www.overclock.net/forum/28308884-post445.html
https://amia.io/2020/01/03/rx5700-mod-bios-test-eth-mining/
http://dr-shost.com/files/atiflash293plus.zip
http://dr-shost.com/files/rx5700-orig-mod-bios.zip
https://www.overclock.net/forum/28308884-post445.html
https://amia.io/2020/01/03/rx5700-mod-bios-test-eth-mining/
http://dr-shost.com/files/atiflash293plus.zip
http://dr-shost.com/files/rx5700-orig-mod-bios.zip
No you won't..
Flashing an XT vbios to a non XT card is the only thing that is possible.
The onboard PSP prevents you from doing modifications.
Also, memory timing changes on a Navi are like on an R7, useless.
The only thing that would improve performance (particularly eth mining wise) would be to make it so that you extend your bandwith.
Which means that you would need to change clocks + timings so it remains stable and because the PSP on board even has it's own PPtable, this is yet again not possible.
Well, anything is possible, or almost :p
But at this stage, i doubt anyone has been able to accomplish vbios edits for navi (basically bypass PSP).
Cheers
Dear hulk999, thank you for your input. I can confirm the Gigabyte RX Vega 64 Gaming OC is problematic for Ethereum mining in particular. The memory configuration (mine is also Samsung), seems to refuse overclocking or higher performance straps. The best I could achieve was 990mhz on the memory using stock straps. In other words just over 38 mega hashes, like you. Yes, I have upgraded my bios from version F1 to F2.
Thank you for referring to team red miner and their vega timing options. I now for the first time am achieving 2200 hash mining Monero. Although I would prefer to mine Ethereum at 50 mega hashes!
So, if anyone in this thread has any clue why some of us with Gigabyte Gaming OC Vega's have trouble with Ethereum tuning please respond. Good day to all.
Thank you for referring to team red miner and their vega timing options. I now for the first time am achieving 2200 hash mining Monero. Although I would prefer to mine Ethereum at 50 mega hashes!
So, if anyone in this thread has any clue why some of us with Gigabyte Gaming OC Vega's have trouble with Ethereum tuning please respond. Good day to all.
if you are able to achieve 2.2kh on CN/R there's absolutely no reason not to be able to run ETH with over 45MH... CNR should be more demanding on the memory in terms of stability so likely you are doing something wrong
1) apply ppt that will set default clocks and volts much lower
2) for fine tuning of volts and frequencies you may use overdriven tool. core should be around 800-850mv, freq not too high, over 1300MHz is likely overkill for ETH, mem as high as you can get it stable, SOC should be @1.1GHz
3) after it's stable around 42MH for vega64, with the settings above, you can try amdmemtweak and go to ~50
EDIT: and do not use Afterburner - have it disabled from Task Scheduler (also do DDUs and have clean driver setups, preferably without the AMD settings GUI crap)
I have exactly the same concerns on this card, I do not understand how it works. My msi 56 and sapphire 64 are perfect under eth with trm but there I am lost.
no powerplay table works properly, blue screen or frozen win. I cannot exceed 950/970 in memory. first time for me .possible to push at 40mh but after no tweak passes without crushing of trm or win .10.
I don't understand this card
edit :gpu dead .
Since you're promoting cloud mining which is scam by default, I won't
try other links either, as I suspect those tools probably steal my crypto or
install viruses on my PC
try other links either, as I suspect those tools probably steal my crypto or
install viruses on my PC
Bruh, chill man.
I don't know shit about mining, I'm just an overclocking enthusiast.
You're accusing me about something related to scam because of the fact that the source for this guys comment is that amia.io website?
I've tested the bios edits and the timings indeed can be changed on the bios level. Look here - gpubiosbase reports 1750 straps at 1875/2000 memory clock for the edited bios.
https://i.imgur.com/lZKcLnX.png
The modded atiflash that guys did also works as intended. Tweaking the timings did increase Superposition and 3DMark Timespy scores for me slightly too.
I need to test out the 1250Mhz straps on the weekend and try to decode the straps somehow to test them one by one.
So.. I guess we'll see 5700 bios modding in the future
https://www.overclock.net/forum/28308884-post445.html
https://amia.io/2020/01/03/rx5700-mod-bios-test-eth-mining/
http://dr-shost.com/files/atiflash293plus.zip
http://dr-shost.com/files/rx5700-orig-mod-bios.zip
https://www.overclock.net/forum/28308884-post445.html
https://amia.io/2020/01/03/rx5700-mod-bios-test-eth-mining/
http://dr-shost.com/files/atiflash293plus.zip
http://dr-shost.com/files/rx5700-orig-mod-bios.zip
Since you're promoting cloud mining which is scam by default, I won't
try other links either, as I suspect those tools probably steal my crypto or
install viruses on my PC
So.. I guess we'll see 5700 bios modding in the future
https://www.overclock.net/forum/28308884-post445.html
https://amia.io/2020/01/03/rx5700-mod-bios-test-eth-mining/
http://dr-shost.com/files/atiflash293plus.zip
http://dr-shost.com/files/rx5700-orig-mod-bios.zip
https://www.overclock.net/forum/28308884-post445.html
https://amia.io/2020/01/03/rx5700-mod-bios-test-eth-mining/
http://dr-shost.com/files/atiflash293plus.zip
http://dr-shost.com/files/rx5700-orig-mod-bios.zip
NOTHING CONCLUSIVE--
I tried reading the several threads that I found after searching earlier posts in this thread concerning user-modded 5700 series AMD graphics cards. The user claiming to be attempting BIOS mods and uploading them with ATIflash has poor English or is deliberately using LOLcat-speak. Nothing posted is legible enough to make sense.
Other long-time gurus explained that that the latest AMD cards have encrypted and signed BIOS. The Navi series won't accept a BIOS flash the way Polaris and earlier cards will.
If you can point me to a legible post or review explaining how to alter a Navi BIOS and flash it, please do.
--scryptr
I tried reading the several threads that I found after searching earlier posts in this thread concerning user-modded 5700 series AMD graphics cards. The user claiming to be attempting BIOS mods and uploading them with ATIflash has poor English or is deliberately using LOLcat-speak. Nothing posted is legible enough to make sense.
Other long-time gurus explained that that the latest AMD cards have encrypted and signed BIOS. The Navi series won't accept a BIOS flash the way Polaris and earlier cards will.
If you can point me to a legible post or review explaining how to alter a Navi BIOS and flash it, please do.
--scryptr
Of course they can...even before 5600, you could flash 5700 with 5700XT bios...but all of those are AMD-made, already signed
bios-es. Flashing is not a problem, but signing
bios-es. Flashing is not a problem, but signing
search for atiflash293plus
Still, AMD is releasing new bioses for the 5600, they raised frequencies and TDP allowance after Nvidia cut the RTX 2060 prices. This means the Navis can be BIOS flashed. Modified bioses is another issue.
Of course they can...even before 5600, you could flash 5700 with 5700XT bios...but all of those are AMD-made, already signed
bios-es. Flashing is not a problem, but signing
So not sure what you're trying to say here.
that flashing custom bios is possibleNOTHING CONCLUSIVE--
I tried reading the several threads that I found after searching earlier posts in this thread concerning user-modded 5700 series AMD graphics cards. The user claiming to be attempting BIOS mods and uploading them with ATIflash has poor English or is deliberately using LOLcat-speak. Nothing posted is legible enough to make sense.
Other long-time gurus explained that that the latest AMD cards have encrypted and signed BIOS. The Navi series won't accept a BIOS flash the way Polaris and earlier cards will.
If you can point me to a legible post or review explaining how to alter a Navi BIOS and flash it, please do. --scryptr
Still, AMD is releasing new bioses for the 5600, they raised frequencies and TDP allowance after Nvidia cut the RTX 2060 prices. This means the Navis can be BIOS flashed. Modified bioses is another issue.
So not sure what you're trying to say here.
that flashing custom bios is possibleNOTHING CONCLUSIVE--
I tried reading the several threads that I found after searching earlier posts in this thread concerning user-modded 5700 series AMD graphics cards. The user claiming to be attempting BIOS mods and uploading them with ATIflash has poor English or is deliberately using LOLcat-speak. Nothing posted is legible enough to make sense.
Other long-time gurus explained that that the latest AMD cards have encrypted and signed BIOS. The Navi series won't accept a BIOS flash the way Polaris and earlier cards will.
If you can point me to a legible post or review explaining how to alter a Navi BIOS and flash it, please do. --scryptr
So not sure what you're trying to say here.
that flashing custom bios is possible Hi every one.
With my Vega56 original bios and Amdmemtweak : 50Mh/s on Etash
With my Vega56 original bios and Amdmemtweak : 50Mh/s on Etash
Which settings and timmings you got stable?
Hi every one.
With my Vega56 original bios and Amdmemtweak : 50Mh/s on Etash
Question : Amdmemtweak works with Radeon VII ?
With my Vega56 original bios and Amdmemtweak : 50Mh/s on Etash
Question : Amdmemtweak works with Radeon VII ?
flashing 5700 with custom bios is not a problem any more 
the only problem is bios editor for Navi... hexeditor is our friend and shostt58
the only problem is bios editor for Navi... hexeditor is our friend and shostt58
Please define yourself.
AFAIK, flashing a modified vbios (except then flashing an XT vbios to a non XT card) does not work due to the on board PSP basically saying "Nope".
Using a custom softpowerplay table, that is of course possible.
So not sure what you're trying to say here.
Jump to: