Hi,
i have problem with my 2x Sapphire RX580 Nitro+ 8GB Hynix rig.
1. I was perfectly dual mine for 1 month 60mh/s ETH + 1150 MH/s SIA, with latest drivers. Suddenly my rig goes green screen, sometimes blue screen. Downgraded drivers to 17.4.3 and 17.4.4, same problem.
But sometimes when I run only eth mining, then works, but not always. And then I can dual mine also, but it is strange that first I need to run eth only mining then close miner and start again dual mine. This is not working always.
2. One more thing, my cards are same and each gives 30.3 mh/s, but sometimes hashrate of one card drops to 27 for few second and returns to 30.3, and then again after 30-60 sec. Second card is stable to 30.3. This started to happen when I put my second card in rig, without that second card first card was also stable to 30.3.
Any help for this 2 problems? :/
Thanks!
Topic: AMD Rebrand - RX570 / RX580 - Official Thread - page 14. (Read 173439 times)
God dammit... now its really reallly impossible to get any AMD gpus.
I might get one batch in july, which was expected in june.... the rest is pushed to august. Earliest.
Yeah it's frustrating isn't it.
no it s not you need 1200w (undervolt also)
i have 5x on 1000w they undervolt, not sure anymore how much it was but it was close to 1000w on eth was dualmining i think, now i remove dual because i keep my ether
1000W for 6 GPU is enough. With proper undervolting absolutly no problem.i have 5x on 1000w they undervolt, not sure anymore how much it was but it was close to 1000w on eth was dualmining i think, now i remove dual because i keep my ether
right i check my ring undervolt it s using 752W for 5x 570 on ether
but if you do dualmining it s use up to 1000
Is it more profitable to dual mine?
yes it is (if you don't count electricity cost), but not all days, if you do multi algo and auto exchange,
but if you keep your coins to sell later than no it s not
no it s not you need 1200w (undervolt also)
i have 5x on 1000w they undervolt, not sure anymore how much it was but it was close to 1000w on eth was dualmining i think, now i remove dual because i keep my ether
1000W for 6 GPU is enough. With proper undervolting absolutly no problem.i have 5x on 1000w they undervolt, not sure anymore how much it was but it was close to 1000w on eth was dualmining i think, now i remove dual because i keep my ether
right i check my ring undervolt it s using 752W for 5x 570 on ether
but if you do dualmining it s use up to 1000
You could undervolt more. My 5x570 are consuming 530w at the wall (eth) Doing 28Mh/s each. The cpu/board/ram alone consumes ~70w
ok but i did not really try to get lower, what speed you running at and what timming you used ?
530w is impressive
i did not lot of test on rx570 because my rx470 i could not undervolt more so i just keep same voltage on rx570 and clock because it s mostly the same gpu
that screenshot was @ 1090/1950 0.831v (drops to 0.81 under load). Dual mining stable except one one card which needs more.
Dual mining increases each card by ~ 25w, so + 125w above the 530.
no it s not you need 1200w (undervolt also)
i have 5x on 1000w they undervolt, not sure anymore how much it was but it was close to 1000w on eth was dualmining i think, now i remove dual because i keep my ether
1000W for 6 GPU is enough. With proper undervolting absolutly no problem.i have 5x on 1000w they undervolt, not sure anymore how much it was but it was close to 1000w on eth was dualmining i think, now i remove dual because i keep my ether
right i check my ring undervolt it s using 752W for 5x 570 on ether
but if you do dualmining it s use up to 1000
Is it more profitable to dual mine?
yes it is (if you don't count electricity cost), but not all days, if you do multi algo and auto exchange,
but if you keep your coins to sell later than no it s not
no it s not you need 1200w (undervolt also)
i have 5x on 1000w they undervolt, not sure anymore how much it was but it was close to 1000w on eth was dualmining i think, now i remove dual because i keep my ether
1000W for 6 GPU is enough. With proper undervolting absolutly no problem.i have 5x on 1000w they undervolt, not sure anymore how much it was but it was close to 1000w on eth was dualmining i think, now i remove dual because i keep my ether
right i check my ring undervolt it s using 752W for 5x 570 on ether
but if you do dualmining it s use up to 1000
You could undervolt more. My 5x570 are consuming 530w at the wall (eth) Doing 28Mh/s each. The cpu/board/ram alone consumes ~70w
ok but i did not really try to get lower, what speed you running at and what timming you used ?
530w is impressive
i did not lot of test on rx570 because my rx470 i could not undervolt more so i just keep same voltage on rx570 and clock because it s mostly the same gpu
Oh, my apologies. I don't have links from amazon like that.
No problem
anyone can answer the original question ?
Oh, my apologies. I don't have links from amazon like that.
There is no referral link in there, I know it says ref=xxxx? but on amazon a referral link is represented by tag=xxx?
i just do a search on amazon.com and copy the link 
There is no referral link in there, I know it says ref=xxxx? but on amazon a referral link is represented by tag=xxx?
spam ? are you crazy ? is my 2nd post and the first is on RX570 Thread, i think is better here because ppl are talking about rx 580 tooso If you are angry for some reason, try not to get angry with anyone, take a deep breath and you will feel better
what do you mean with "referal link" ?
spam ? are you crazy ? is my 2nd post and the first is on RX570 Thread, i think is better here because ppl are talking about rx 580 tooso If you are angry for some reason, try not to get angry with anyone, take a deep breath and you will feel better
Hey guys !
Someone have values for this card ?
MSI armor Fx 580 4gb OC hynix memory
https://www.amazon.com/MSI-RX-580-ARMOR-4G/dp/B06XZZ93FQ/ref=sr_1_fkmr0_1?ie=UTF8&qid=1498056302&sr=8-1-fkmr0&keywords=fx+580+armor
Ty !
Why you spam this ref link on all over the forum?Someone have values for this card ?
MSI armor Fx 580 4gb OC hynix memory
https://www.amazon.com/MSI-RX-580-ARMOR-4G/dp/B06XZZ93FQ/ref=sr_1_fkmr0_1?ie=UTF8&qid=1498056302&sr=8-1-fkmr0&keywords=fx+580+armor
Ty !
spam ? are you crazy ? is my 2nd post and the first is on RX570 Thread, i think is better here because ppl are talking about rx 580 tooso If you are angry for some reason, try not to get angry with anyone, take a deep breath and you will feel better
Hey guys !
Someone have values for this card ?
MSI armor Fx 580 4gb OC hynix memory
https://www.amazon.com/MSI-RX-580-ARMOR-4G/dp/B06XZZ93FQ/ref=sr_1_fkmr0_1?ie=UTF8&qid=1498056302&sr=8-1-fkmr0&keywords=fx+580+armor
Ty !
Why you spam this ref link on all over the forum? Someone have values for this card ?
MSI armor Fx 580 4gb OC hynix memory
https://www.amazon.com/MSI-RX-580-ARMOR-4G/dp/B06XZZ93FQ/ref=sr_1_fkmr0_1?ie=UTF8&qid=1498056302&sr=8-1-fkmr0&keywords=fx+580+armor
Ty !
Hey guys !
Someone have values for this card ?
MSI armor Fx 580 4gb OC hynix memory
https://www.amazon.com/MSI-RX-580-ARMOR-4G/dp/B06XZZ93FQ/ref=sr_1_fkmr0_1?ie=UTF8&qid=1498056302&sr=8-1-fkmr0&keywords=fx+580+armor
Ty !
Someone have values for this card ?
MSI armor Fx 580 4gb OC hynix memory
https://www.amazon.com/MSI-RX-580-ARMOR-4G/dp/B06XZZ93FQ/ref=sr_1_fkmr0_1?ie=UTF8&qid=1498056302&sr=8-1-fkmr0&keywords=fx+580+armor
Ty !
no it s not you need 1200w (undervolt also)
i have 5x on 1000w they undervolt, not sure anymore how much it was but it was close to 1000w on eth was dualmining i think, now i remove dual because i keep my ether
1000W for 6 GPU is enough. With proper undervolting absolutly no problem.i have 5x on 1000w they undervolt, not sure anymore how much it was but it was close to 1000w on eth was dualmining i think, now i remove dual because i keep my ether
right i check my ring undervolt it s using 752W for 5x 570 on ether
but if you do dualmining it s use up to 1000
You could undervolt more. My 5x570 are consuming 530w at the wall (eth) Doing 28Mh/s each. The cpu/board/ram alone consumes ~70w
no it s not you need 1200w (undervolt also)
i have 5x on 1000w they undervolt, not sure anymore how much it was but it was close to 1000w on eth was dualmining i think, now i remove dual because i keep my ether
1000W for 6 GPU is enough. With proper undervolting absolutly no problem.i have 5x on 1000w they undervolt, not sure anymore how much it was but it was close to 1000w on eth was dualmining i think, now i remove dual because i keep my ether
right i check my ring undervolt it s using 752W for 5x 570 on ether
but if you do dualmining it s use up to 1000
Is it more profitable to dual mine?
no it s not you need 1200w (undervolt also)
i have 5x on 1000w they undervolt, not sure anymore how much it was but it was close to 1000w on eth was dualmining i think, now i remove dual because i keep my ether
1000W for 6 GPU is enough. With proper undervolting absolutly no problem.i have 5x on 1000w they undervolt, not sure anymore how much it was but it was close to 1000w on eth was dualmining i think, now i remove dual because i keep my ether
right i check my ring undervolt it s using 752W for 5x 570 on ether
but if you do dualmining it s use up to 1000
Another problem;
After flashing I see one of my rx580's as Polaris 10. I tried reverting it back to original bios but still the same.
http://imgur.com/a/WE8xX
Also I cannot see the fan of that GPU. Claymore only shows gpu0..Any ideas why that might happen?
PS: I only flashed the card that is identified as Polaris 10
After flashing I see one of my rx580's as Polaris 10. I tried reverting it back to original bios but still the same.
http://imgur.com/a/WE8xX
Also I cannot see the fan of that GPU. Claymore only shows gpu0..Any ideas why that might happen?
PS: I only flashed the card that is identified as Polaris 10
Try this Polaris BIOS Editor
https://github.com/jaschaknack/PolarisBiosEditor/tree/110aa3a5a0aeafe16bb0a96b53583e7e8e77999b
I used this one.
I have the same problem with one of my msi rx580 armor 8gb. After one week stop to work, in windows device manager says that windows has stopped the gpu because of a problem and with ati flash (before flashing) the bios change from rx580 series to polaris 10. I try everything but nothing... did you resolve? thanks.
Got a 2nd rig running couple of weeks ago using MSI RX580 Gaming 4GB cards on a H81 Pro BTC board. I still can't get the 6th GPU to work in it, crashes on boot every time. So finally decided to take a break on that and try to tweak the cards. They ran at 22.4 each stock, then at 25ish after changing the memory straps. Now I am currently getting 27.8 on each card after running Afterburner at -30 Core Voltage, 1155 Core Clock, 1900 Memory Clock. Hope to play around with those settings some more this week. Then will attempt to try and get the 6th card running again.
Have you switched the PCI-E 16 slot to Ver2 in bios? also I am using preffered gpu Onboard. Try it
I have changed it to Gen 2 in the BIOS but have not tried setting preferred to Onboard, will give that a try, thanks.
But if you killed card, did they fixed it within warranty?
Dual Bios cards I have only Sapphire Nitros nothing else, I have here like 10 different models, and only Nitro have dual bios...
1st CASE - I bought "like new" Aorus XTR 8GB card, its LED was not working and somebody played with timings already. As it has no bios switch I am not able to return it back to original bios without somebody sending me original BIOS for this card. Its LED is not working but it is not mechanicaly broken or unplugged as if I restart PC it flashes for half second. Or do you have any idea how or where to fix that LED settings?
2nd CASE - I bought new Gigabyte G1 8GB, my pc frozen while flashing BIOS via atiflash. Now card is a ZOMBIE. No PC turn on while that card is connected. I wanted to access its BIOS and reset it but I cannot cause that cooler is sticking too hard and without removing cooler I cannot access screws which hold the backplate. Got it? So that card is dead and I probably cant reset BIOS any other way yes? Need to send it back for warranty?
How to prevent this crazy atiflash from frozing my pc? It happened already 2 times from 24 cards I have, I have 2 zombie cards ffs, it is rly retarded. Why it works 22 times with no problem and two times crashes/freez and this is it, zombo cards...
Dual Bios cards I have only Sapphire Nitros nothing else, I have here like 10 different models, and only Nitro have dual bios...
1st CASE - I bought "like new" Aorus XTR 8GB card, its LED was not working and somebody played with timings already. As it has no bios switch I am not able to return it back to original bios without somebody sending me original BIOS for this card. Its LED is not working but it is not mechanicaly broken or unplugged as if I restart PC it flashes for half second. Or do you have any idea how or where to fix that LED settings?
2nd CASE - I bought new Gigabyte G1 8GB, my pc frozen while flashing BIOS via atiflash. Now card is a ZOMBIE. No PC turn on while that card is connected. I wanted to access its BIOS and reset it but I cannot cause that cooler is sticking too hard and without removing cooler I cannot access screws which hold the backplate. Got it? So that card is dead and I probably cant reset BIOS any other way yes? Need to send it back for warranty?
How to prevent this crazy atiflash from frozing my pc? It happened already 2 times from 24 cards I have, I have 2 zombie cards ffs, it is rly retarded. Why it works 22 times with no problem and two times crashes/freez and this is it, zombo cards...
The LED is user adjustable.. if the previous owner changed timings it is very likely he disabled the LED as well. Did your card arrive with the aorus graphics engine software cd? i found it made my system act funny but you can set the color of the led's, pattern of the flash/pulse and whether you want it on at all. install that software and you will be able to turn the LED back on provided it will work with the adjusted strap.
your default straps for aorus rx series hynix ram are:
Code:
2000: BBB000000000000022889D0073EE8D53805515133ECF560C004E26017E0514206A8900A0020031201C143840C5303F17
1750: 999000000000000022559D0031627C489055131339CDD50A004C06017D0514206A8900A00200312019123037AD2C3A17
1625: 999000000000000022559D0010DE7B4480551312B78C450A004C0601750414206A8900A00200312018112D34A42A3816
1500: 777000000000000022339D00CE516A3D9055111230CB4409004AE600740114206A8900A002003120150F292F94273116
1425: 777000000000000022339D00CE516A3B805511112FCBD408004AE6006C0014206A8900A002003120150F272D8D263015
1750: 999000000000000022559D0031627C489055131339CDD50A004C06017D0514206A8900A00200312019123037AD2C3A17
1625: 999000000000000022559D0010DE7B4480551312B78C450A004C0601750414206A8900A00200312018112D34A42A3816
1500: 777000000000000022339D00CE516A3D9055111230CB4409004AE600740114206A8900A002003120150F292F94273116
1425: 777000000000000022339D00CE516A3B805511112FCBD408004AE6006C0014206A8900A002003120150F272D8D263015
I personally would not use a daily usage computer to flash cards, particularly if you're using windows due to unknown malware or virus or even just extra services you may be unaware of running on your system.
try to have an old box with free pci slot you can boot freedos to and flash from there if possible.
as for your ZOMBIE card i'm still at a loss as to what you're trying to do. there is no jumper on the pcb to reset bios although that would be a nice option even on dual boot equipped cards.
"access" the bios has nothing to do with tearing down a card or removing it's cooler. you should be able to revive it somehow if you search around and find a similar scenario to what you are experiencing.
The thing is they came with Samsung memories. All 3 Aorus I have showing Samsung in GPU-Z and also in BIOS there is 0x21, I guess thats Samsung for sure.
I do not know which other things he could change in bios so rly if anyone have Aorus XTR 8GB PLS LET ME KNOW.
Got a 2nd rig running couple of weeks ago using MSI RX580 Gaming 4GB cards on a H81 Pro BTC board. I still can't get the 6th GPU to work in it, crashes on boot every time. So finally decided to take a break on that and try to tweak the cards. They ran at 22.4 each stock, then at 25ish after changing the memory straps. Now I am currently getting 27.8 on each card after running Afterburner at -30 Core Voltage, 1155 Core Clock, 1900 Memory Clock. Hope to play around with those settings some more this week. Then will attempt to try and get the 6th card running again.
Have you switched the PCI-E 16 slot to Ver2 in bios? also I am using preffered gpu Onboard. Try it
Jump to: