Topic: AMT users thread. - page 25. (Read 60119 times)
Hey, fat Jewish asshole, you deleted one of your investomer's posts:
Good news is miners arrived. Intact, no weird parts. More to come. I am setting up for review likley wont be until tonight or tomorrow before I post anything, performance stats will come in a couple days after running it.
Quote
WRITE TO SALES(at)ADVANCEDMINERS(dot)COM FOR MORE DETAILS.
If I were a scam company trying to get as much money out from a community as possible, this is exactly the way I would write my sales contact info. This fuckin' Joshua Zipkin is such an idiot, no wonder his parents split up due to his birth.
https://SALES(at)ADVANCEDMINERS(dot)COM The money should be rollin' in any second now... I'll give it few more seconds... Just a couple more... Those cocksuckers over at BitcoinTalk must be the cause of this. I guess I'll lower my prices and start an auction, for I need cash badly to pass some crumbs to these Chinese fuckers before they, too, realize that I'm fucking them.
I have another couple of questions about my mining equipment manufacturing company (VaporLabs).
If I ship a miner to a client without a PSU, and he gets impatient and installs one of his own, and the chips get fried, or the unit catches fire, will I be required to return or replace the miner, and/or be liable for damages?
If I advertised my miner as consuming 1200 W, but the 1200 W PSU that he tried to install is not enough so he swaps it for a 2400 W unit, can he claim that my miner consuemes more than advertised? Can I sue him if he writes that on public forum?
Anxiously waiting for your answers. Well, not really.
If I ship a miner to a client without a PSU, and he gets impatient and installs one of his own, and the chips get fried, or the unit catches fire, will I be required to return or replace the miner, and/or be liable for damages?
If I advertised my miner as consuming 1200 W, but the 1200 W PSU that he tried to install is not enough so he swaps it for a 2400 W unit, can he claim that my miner consuemes more than advertised? Can I sue him if he writes that on public forum?
Anxiously waiting for your answers. Well, not really.
According to US laws...liable for damages it is a liability issue. However as there is a case that covers all this it likely will be applicable there. There was an incredible amount of time to make this right and there are issues like missing PSUs. There is a clear depreciation value in the hardware itself as its electronics equipment. This equipment is designed specifically to provide profitability ergo time= money. So clear losses can be defined based on the previous closing prices of BTC since the complaint was initiated.
I thought I would report STILL no miner no tracking info. Allegedly was rerouted yesterday to me due to a mislabeling but I have no confirmation of any of that at this time. All attempts to inquire to AMT about it have been silent. Since they have gone silent I will post it publicly. As I said once I have the hardware I will create a separate post reviewing the hardware and unpacking solely on its merits.
I have another couple of questions about my mining equipment manufacturing company (VaporLabs).
If I ship a miner to a client without a PSU, and he gets impatient and installs one of his own, and the chips get fried, or the unit catches fire, will I be required to return or replace the miner, and/or be liable for damages?
If I advertised my miner as consuming 1200 W, but the 1200 W PSU that he tried to install is not enough so he swaps it for a 2400 W unit, can he claim that my miner consuemes more than advertised? Can I sue him if he writes that on public forum?
Anxiously waiting for your answers. Well, not really.
If I ship a miner to a client without a PSU, and he gets impatient and installs one of his own, and the chips get fried, or the unit catches fire, will I be required to return or replace the miner, and/or be liable for damages?
If I advertised my miner as consuming 1200 W, but the 1200 W PSU that he tried to install is not enough so he swaps it for a 2400 W unit, can he claim that my miner consuemes more than advertised? Can I sue him if he writes that on public forum?
Anxiously waiting for your answers. Well, not really.
AMT_miners, did you get my email?
like I mentioned my baby has been arrived. so please take a time to reply my email or put information here. and put me to priority refund list.
My order number is #645 and #962.
Thank you,
Tony
like I mentioned my baby has been arrived. so please take a time to reply my email or put information here. and put me to priority refund list.
My order number is #645 and #962.
Thank you,
Tony
Joshua Zipkin doesn't give one iota of shit of your baby as long as his Racist Jewish Bulgarian belly is feed, and it has thanks to your purchase. The best that you can hope for is that he WILL physically pen a refund list oppose to ONLY stating that he has one, albeit maintaining either list WILL eventually afford you the same results - ZILCH!
Mr. and Mrs. Harrison Zachariah Zipkin, meet your newborn TOY, Joshua Zilch Zipkin.
Mrs. Z.: OMG, he looks like shit!
Mr. Z.: Yes, but it's Jewish shit, and we'll raise him till he's of age, then kick this piece of shit to the curb so that he can fuck up shit in the world.
Took a while but I saw what change you were referring to. Specifically the Lead time and pricing are the best.
Apologies for you having to hunt it. I meant to highlight it, but forgot. Why would he delete the best feature of the OP?
I thought you were referring to bullet point #4 (Was: We're American and proud to build our miners in America and not China. Now: We're American and we are proud to build our miners in both America and Europe, and China.) which was a huge misrepresentation of their product. and 1 of the many points that attracted me to purchase from AMT which now constitute a bait and switch.
But now they actually have 3 points that are not lies. They also take checks and now they can finally say they are shipping miners but everything else is a real stretch of a psychotic imagination.
7. We offer customer support for guys that are just starting in the mining industry. (This one makes me laugh every time I read it.)
2. We speak to our customers directly and we are trying to improve our customer service everyday. (After thinking about it I guess this one is also true if you are Customer1, Customer2 or Not-a-Customer-yet.)
Took a while but I saw what change you were referring to. Specifically the Lead time and pricing are the best.
Apologies for you having to hunt it. I meant to highlight it, but forgot. Why would he delete the best feature of the OP?
Took a while but I saw what change you were referring to. Specifically the Lead time and pricing are the best.
My unit acquired an IP via DHCP over ethernet, out of the box. The SSH login was root/admin.
Honestly if its just to get the miner up and running I would say connect an Ethernet cable directly to it and manually configure the IP. From all indications and versioning it appears this is the stock version with only the default IP changed. Worst case SSH in I believe its root/pi and go to the /etc/network* directory OR in the /etc folder with an ifcfg type name. depending on what distro they based this off of that could vary a bit BUT you should be able to manually do it if the webui does not work. FYI the image is corrupted so I would not attempt to install it.
FYI to follow up on my post yesterday. Josh has corrected the shipping issue with my miner shipment. It is in the neighboring county where it was "mislabeled" to a different location, but it has been supposedly routed for delivery today, as I do not have a tracking number at this time I will not be able to confirm whether that status. That being said however, once I receive it I will post a technical review of the hardware based on the hardware merits, not on the saga. anyone wanting to know the history can just refer to the threads on the matter. I will post photos as well to show any conditions. Performance review will come after a 48 hour test on elgius for community review.
I had prepared a format months ago in prep for the original delivery...dusting it off for this. Planning a full unboxing gallery. The review will be as technical and unbiased as it gets. I have opinions on the matter but prefer to keep those out for the sake of at least reviewing the hardware on its merits whatever those may be.
From other PMs I have gotten for assistance, I will also cover that in the review so its a community based instruction manual as there is no official one at this time of writing.
I had prepared a format months ago in prep for the original delivery...dusting it off for this. Planning a full unboxing gallery. The review will be as technical and unbiased as it gets. I have opinions on the matter but prefer to keep those out for the sake of at least reviewing the hardware on its merits whatever those may be.
From other PMs I have gotten for assistance, I will also cover that in the review so its a community based instruction manual as there is no official one at this time of writing.
watch out for potentially sharp, rusty hazardous objects. THey may have packed it with used razor blades to add weight.
Yea I will be wearing some thick ice fishing gloves for this one based on your photos.
FYI more than likely getting miner tonight. The mislabeling was AMT's fault but the DHL delay is on DHL now. No tracking info or any info at the time of this writing on the miner. Will update once I have more information.
FYI to follow up on my post yesterday. Josh has corrected the shipping issue with my miner shipment. It is in the neighboring county where it was "mislabeled" to a different location, but it has been supposedly routed for delivery today, as I do not have a tracking number at this time I will not be able to confirm whether that status. That being said however, once I receive it I will post a technical review of the hardware based on the hardware merits, not on the saga. anyone wanting to know the history can just refer to the threads on the matter. I will post photos as well to show any conditions. Performance review will come after a 48 hour test on elgius for community review.
I had prepared a format months ago in prep for the original delivery...dusting it off for this. Planning a full unboxing gallery. The review will be as technical and unbiased as it gets. I have opinions on the matter but prefer to keep those out for the sake of at least reviewing the hardware on its merits whatever those may be.
From other PMs I have gotten for assistance, I will also cover that in the review so its a community based instruction manual as there is no official one at this time of writing.
I had prepared a format months ago in prep for the original delivery...dusting it off for this. Planning a full unboxing gallery. The review will be as technical and unbiased as it gets. I have opinions on the matter but prefer to keep those out for the sake of at least reviewing the hardware on its merits whatever those may be.
From other PMs I have gotten for assistance, I will also cover that in the review so its a community based instruction manual as there is no official one at this time of writing.
watch out for potentially sharp, rusty hazardous objects. THey may have packed it with used razor blades to add weight.
Yea I will be wearing some thick ice fishing gloves for this one based on your photos.
FYI to follow up on my post yesterday. Josh has corrected the shipping issue with my miner shipment. It is in the neighboring county where it was "mislabeled" to a different location, but it has been supposedly routed for delivery today, as I do not have a tracking number at this time I will not be able to confirm whether that status. That being said however, once I receive it I will post a technical review of the hardware based on the hardware merits, not on the saga. anyone wanting to know the history can just refer to the threads on the matter. I will post photos as well to show any conditions. Performance review will come after a 48 hour test on elgius for community review.
I had prepared a format months ago in prep for the original delivery...dusting it off for this. Planning a full unboxing gallery. The review will be as technical and unbiased as it gets. I have opinions on the matter but prefer to keep those out for the sake of at least reviewing the hardware on its merits whatever those may be.
From other PMs I have gotten for assistance, I will also cover that in the review so its a community based instruction manual as there is no official one at this time of writing.
I had prepared a format months ago in prep for the original delivery...dusting it off for this. Planning a full unboxing gallery. The review will be as technical and unbiased as it gets. I have opinions on the matter but prefer to keep those out for the sake of at least reviewing the hardware on its merits whatever those may be.
From other PMs I have gotten for assistance, I will also cover that in the review so its a community based instruction manual as there is no official one at this time of writing.
watch out for potentially sharp, rusty hazardous objects. THey may have packed it with used razor blades to add weight.
Well I know you've seen my request for refund as you've deleted another post of mine addressing it.
I want a full refund!!
$12,158.00
That's Twelve Thousand One Hundred Fifty Eight dollars and Zero cents.
I repeat: please do NOT send me any machines. What I ordered as promised was not delivered please provide me with a full refund.
Thank you.
I want a full refund!!
$12,158.00
That's Twelve Thousand One Hundred Fifty Eight dollars and Zero cents.
I repeat: please do NOT send me any machines. What I ordered as promised was not delivered please provide me with a full refund.
Thank you.
Thank you for the notice. You are already in the refund list. Please, rest assured that there is no need of further posts addressing that.
Thank you for addressing and confirming my post.
FYI to follow up on my post yesterday. Josh has corrected the shipping issue with my miner shipment. It is in the neighboring county where it was "mislabeled" to a different location, but it has been supposedly routed for delivery today, as I do not have a tracking number at this time I will not be able to confirm whether that status. That being said however, once I receive it I will post a technical review of the hardware based on the hardware merits, not on the saga. anyone wanting to know the history can just refer to the threads on the matter. I will post photos as well to show any conditions. Performance review will come after a 48 hour test on elgius for community review.
I had prepared a format months ago in prep for the original delivery...dusting it off for this. Planning a full unboxing gallery. The review will be as technical and unbiased as it gets. I have opinions on the matter but prefer to keep those out for the sake of at least reviewing the hardware on its merits whatever those may be.
From other PMs I have gotten for assistance, I will also cover that in the review so its a community based instruction manual as there is no official one at this time of writing.
I had prepared a format months ago in prep for the original delivery...dusting it off for this. Planning a full unboxing gallery. The review will be as technical and unbiased as it gets. I have opinions on the matter but prefer to keep those out for the sake of at least reviewing the hardware on its merits whatever those may be.
From other PMs I have gotten for assistance, I will also cover that in the review so its a community based instruction manual as there is no official one at this time of writing.
We look forward to your honest assessment, O2.
Jump to: