[ANN] AEON [2019-09-27: Upgrade to version 0.13.0.0 ASAP HF@1146200 Oct 25] - page 221.

exciter0

member

Activity: 115

Merit: 10

I'm not sure how Arux is compiling the non-AES cpuminer for Windows, but it's mentioned that mooo's source tree was used:
https://github.com/moneromooo/cpuminer-multi
I would think it should work with both AES-NI and non-AES systems, although I have never tested w/o AES-NI.

Quote from: SRBOOTH on September 02, 2015, 08:40:07 PM

Quote from: exciter0 on September 02, 2015, 07:56:46 PM

Quote from: SRBOOTH on September 02, 2015, 07:51:53 PM

I also can't seem to locate the git for non-AES-NI for cryptonight-lite miner. The one I built from git was for AES-NI only. And the other was a readme file only. Can someone point me right direction , thanks.

here? https://bitcointalk.org/index.php?topic=641696.msg12049159#msg12049159

That is the one that only has only a README file in it.... you will have to forgive me my linux is rusty but it's coming back, I have and do quite a bit of mining using linux but I'm struggling on this for some reason. Any help is appreciated.

btw I ran the following :

wget https://github.com/Arux-BTT/CPUMiner-Multi-cryptonight-light/archive/04082015.tar.gz

tar zxvf 04082015.tar.gz

Then shows only as README.md under ls command.....I imagine I'm just forgetting something, but I did compile the one for AES-NI just fine, however it was a .git file and not a .tar file ... Huh

smooth

legendary

Activity: 2968

Merit: 1198

Quote from: bitl0ck on September 03, 2015, 01:27:11 AM

Quote from: h0g0f0g0 on September 03, 2015, 01:22:34 AM

Code:

2015-Sep-03 08:18:37.472238 [P2P5]
**********************************************************************
You are now synchronized with the network. You may now start simplewallet.

Please note, that the blockchain will be saved only after you quit the daemon with "exit" command or if you use "save" command.
Otherwise, you will possibly need to synchronize the blockchain again.

Use "help" command to see the list of available commands.
**********************************************************************
2015-Sep-03 08:20:02.757811 [P2P5][113.240.243.138:11180 OUT]Sync data returned unknown top block: 602495 -> 599581 [2914 blocks (-8 days) ahead]

WTH?

Sometimes happen on cryptonote coins, even when it says its "now synced " might be syncing.

Yes it happens with all of them. It means that you have caught up to a peer, even though that peer is behind the longest chain. So you will keep syncing from other peers.

bitl0ck

sr. member

Activity: 240

Merit: 250

Quote from: h0g0f0g0 on September 03, 2015, 01:22:34 AM

Code:

2015-Sep-03 08:18:37.472238 [P2P5]
**********************************************************************
You are now synchronized with the network. You may now start simplewallet.

Please note, that the blockchain will be saved only after you quit the daemon with "exit" command or if you use "save" command.
Otherwise, you will possibly need to synchronize the blockchain again.

Use "help" command to see the list of available commands.
**********************************************************************
2015-Sep-03 08:20:02.757811 [P2P5][113.240.243.138:11180 OUT]Sync data returned unknown top block: 602495 -> 599581 [2914 blocks (-8 days) ahead]

WTH?

Sometimes happen on cryptonote coins, even when it says its "now synced " might be syncing.

h0g0f0g0

sr. member

Activity: 295

Merit: 250

Code:

2015-Sep-03 08:18:37.472238 [P2P5]
**********************************************************************
You are now synchronized with the network. You may now start simplewallet.

Please note, that the blockchain will be saved only after you quit the daemon with "exit" command or if you use "save" command.
Otherwise, you will possibly need to synchronize the blockchain again.

Use "help" command to see the list of available commands.
**********************************************************************
2015-Sep-03 08:20:02.757811 [P2P5][113.240.243.138:11180 OUT]Sync data returned unknown top block: 602495 -> 599581 [2914 blocks (-8 days) ahead]

WTH?

Arux

hero member

Activity: 500

Merit: 500

52.8.47.33:8080 not affected, daemon is still 0.9.1.1

smooth

legendary

Activity: 2968

Merit: 1198

Quote from: Hix on September 02, 2015, 08:39:19 PM

Quote from: MoneroMooo on September 02, 2015, 06:28:31 PM

Hi, my pool is currently unable to mine. Not sure exactly what's going on, the daemon rejects mined blocks, even though I've reverted blockchain and daemon to earlier versions.

Please mine on http://52.8.47.33:8080/ which is Arux's pool for now.

51% attack ?

No, it looks like a bug in the recent update. Currently it appears that only MoneroMooo's pool was affected (the problem occurred when the pool was trying to make a payout). I'm preparing a new release which reverts the changes while continuing to look for a longer term fix.

SRBOOTH

sr. member

Activity: 309

Merit: 250

Quote from: exciter0 on September 02, 2015, 07:56:46 PM

Quote from: SRBOOTH on September 02, 2015, 07:51:53 PM

I also can't seem to locate the git for non-AES-NI for cryptonight-lite miner. The one I built from git was for AES-NI only. And the other was a readme file only. Can someone point me right direction , thanks.

here? https://bitcointalk.org/index.php?topic=641696.msg12049159#msg12049159

That is the one that only has only a README file in it.... you will have to forgive me my linux is rusty but it's coming back, I have and do quite a bit of mining using linux but I'm struggling on this for some reason. Any help is appreciated.

btw I ran the following :

wget https://github.com/Arux-BTT/CPUMiner-Multi-cryptonight-light/archive/04082015.tar.gz

tar zxvf 04082015.tar.gz

Then shows only as README.md under ls command.....I imagine I'm just forgetting something, but I did compile the one for AES-NI just fine, however it was a .git file and not a .tar file ... Huh

Hix

legendary

Activity: 1971

Merit: 1036

Quote from: MoneroMooo on September 02, 2015, 06:28:31 PM

Hi, my pool is currently unable to mine. Not sure exactly what's going on, the daemon rejects mined blocks, even though I've reverted blockchain and daemon to earlier versions.

Please mine on http://52.8.47.33:8080/ which is Arux's pool for now.

51% attack ?

exciter0

member

Activity: 115

Merit: 10

Quote from: SRBOOTH on September 02, 2015, 07:51:53 PM

I also can't seem to locate the git for non-AES-NI for cryptonight-lite miner. The one I built from git was for AES-NI only. And the other was a readme file only. Can someone point me right direction , thanks.

here? https://bitcointalksearch.org/topic/m.12049159

SRBOOTH

sr. member

Activity: 309

Merit: 250

I also can't seem to locate the git for non-AES-NI for cryptonight-lite miner. The one I built from git was for AES-NI only. And the other was a readme file only. Can someone point me right direction , thanks.

SRBOOTH

sr. member

Activity: 309

Merit: 250

Now who is Mr Break-it-All? Wink

........ (sorry reference to any earlier funny by myagui)

Anyhow I have converted to my R410 server to ubuntu in anticipation of running a pool. I'm wondering if any of you could give or have a "grocery list" of prerequisites, libs, and tools for most of the things we do. I don't want to do them individually as I go when I need them (frustrating), for miners and wallets etc... done it last year but all those machines are running and I have long forgotten.

I bet some of you have a list like that for fresh installs, I hope . Thanks in advance

...btw once I get my pool up I'll run a week for donation while I tune it and tweak it ( 3 gpu's and 7 cpu's

) I dig this project and all of you here.

MoneroMooo

legendary

Activity: 1276

Merit: 1001

Hi, my pool is currently unable to mine. Not sure exactly what's going on, the daemon rejects mined blocks, even though I've reverted blockchain and daemon to earlier versions.

Please mine on http://52.8.47.33:8080/ which is Arux's pool for now.

Hix

legendary

Activity: 1971

Merit: 1036

Quote from: smooth on September 02, 2015, 05:16:03 PM

Important - network issue

There is some issue with mooo's pool being forked off the network. It seems to be related to a transaction created by the pool, and may be related to one of the updates but we are still investigating. Wallet (deposit/withdrawal) at Bittrex is frozen for the time being and I recommend that you do not engage in other transactions until the problem is diagnosed.

Moo pool on fork right now?

smooth

legendary

Activity: 2968

Merit: 1198

Pulled release 0.9.3.0

I pulled release 0.9.3.0 for the time being as it seems Mooo had just upgraded his pool when the problem occurred. I don't have a reason why the bug fix would have cause this problem but in any case this seems prudent.

Please do not use 0.9.3.0 at this time and stick with one of the earlier releases.

Mooo is attempting to restart his pool using an earlier version.

smooth

legendary

Activity: 2968

Merit: 1198

Important - network issue

There is some issue with mooo's pool being forked off the network. It seems to be related to a transaction created by the pool, and may be related to one of the updates but we are still investigating. Wallet (deposit/withdrawal) at Bittrex is frozen for the time being and I recommend that you do not engage in other transactions until the problem is diagnosed.

smooth

legendary

Activity: 2968

Merit: 1198

It does have bcmemreduce (as did 0.9.2.0) but not pruning. There is no change in memory usage from 0.9.2.0.

The memory usage reported by the OS is somewhat unreliable, so you will get a range of numbers depending on other activity on the system, previous activity since reboot, etc. Also as myagui pointed out there can be some changes in network conditions.

Quote from: exciter0 on September 02, 2015, 01:11:49 PM

I don't believe this release contains the bmreduce and pruning features. If you're not cpu mining, I'd skip and wait til the next release.

Quote from: muchoman on September 02, 2015, 11:18:25 AM

Quote from: myagui on September 02, 2015, 09:02:18 AM

Here you go Mr. Break-It-All Wink

Unofficial win binaries, caution advised, etc, etc: Aeon-Win-x64-0.9.3.0
Note: I haven't tested these myself yet. Just picked up fresh from git and compiled as before.

Quoted from Smooth's instructions:
Upgrade note: Shut down your existing node, delete your poolstate.bin file, then restart using this new version.

Happy Testing!

Working fine but aeond memory usage is 4,5gb.
0.9.2.0 4gb

exciter0

member

Activity: 115

Merit: 10

I don't believe this release contains the bmreduce and pruning features. If you're not cpu mining, I'd skip and wait til the next release.

Quote from: muchoman on September 02, 2015, 11:18:25 AM

Quote from: myagui on September 02, 2015, 09:02:18 AM

Here you go Mr. Break-It-All Wink

Unofficial win binaries, caution advised, etc, etc: Aeon-Win-x64-0.9.3.0
Note: I haven't tested these myself yet. Just picked up fresh from git and compiled as before.

Quoted from Smooth's instructions:
Upgrade note: Shut down your existing node, delete your poolstate.bin file, then restart using this new version.

Happy Testing!

Working fine but aeond memory usage is 4,5gb.
0.9.2.0 4gb

myagui

legendary

Activity: 1154

Merit: 1001

Quote from: muchoman on September 02, 2015, 11:18:25 AM

Working fine but aeond memory usage is 4,5gb.
0.9.2.0 4gb

So I had a moment to run 0.9.3.0, and it used up ~4.1Gb on my Win-8 box, while 0.9.2.0 used up 4.25Gb, which contrasts with your findings. This was not strictly 0.9.2.0 in my case, it was the light-node version running in archive mode (full node). I don't think small differences can be taken as representation of anything much, since these look to vary along with the network conditions, transaction pool, etc.

Perhaps keep an eye on memory usage and see if it settles at some lower amount eventually?

I'm back on testing with just the light-node though, seeing as that is the 1st major release on the horizon (and just 2.6Gb of memory usage is also neat) Wink

Thank you everyone for the feedback btw!

muchoman

sr. member

Activity: 465

Merit: 250

Quote from: myagui on September 02, 2015, 09:02:18 AM

Here you go Mr. Break-It-All Wink

Unofficial win binaries, caution advised, etc, etc: Aeon-Win-x64-0.9.3.0
Note: I haven't tested these myself yet. Just picked up fresh from git and compiled as before.

Quoted from Smooth's instructions:
Upgrade note: Shut down your existing node, delete your poolstate.bin file, then restart using this new version.

Happy Testing!

Working fine but aeond memory usage is 4,5gb.
0.9.2.0 4gb

SRBOOTH

sr. member

Activity: 309

Merit: 250

Quote from: myagui on September 02, 2015, 09:02:18 AM

Here you go Mr. Break-It-All Wink

Unofficial win binaries, caution advised, etc, etc: Aeon-Win-x64-0.9.3.0
Note: I haven't tested these myself yet. Just picked up fresh from git and compiled as before.

Quoted from Smooth's instructions:
Upgrade note: Shut down your existing node, delete your poolstate.bin file, then restart using this new version.

Happy Testing!

Too bad I can't change my handle to that, right?! ... Thank you my friend

Topic: [ANN] AEON [2019-09-27: Upgrade to version 0.13.0.0 ASAP HF@1146200 Oct 25] - page 221. (Read 625666 times)