Can you give us your config file ?
Nvidai TI750GTX :
cudaminer.exe --algo scrypt:64 -t 2 -o stratum+tcp://adn.minebig.com:3399 -u 750ti.gpu -p 1313 -i 0 -L T5x24 -C 1 -H 2
Topic: [ANN] AIDEN | 1st to use sCrypt-OG (GPU Optimized) [v0.10.2.2 Released 7/10/15] - page 133. (Read 235418 times)
April 05, 2014, 06:35:37 PM
Nvidai TI750GTX :
cudaminer.exe --algo scrypt:64 -t 2 -o stratum+tcp://adn.minebig.com:3399 -u 750ti.gpu -p 1313 -i 0 -L T5x24 -C 1 -H 2
April 05, 2014, 06:29:14 PM
I have many hw errors using sgminer with your conf.
Also temps are around 70
I have 290 and 280x
Also temps are around 70
I have 290 and 280x
April 05, 2014, 06:22:50 PM
Hey Guys!
I've got a P2Pool solution up and running. Need to bundle up the code and post it somewhere (will do that soon), but wanted to get some other options out there.
P2Pool: http://96.126.121.117:9405
P2Pool is a decentralized approach to pool mining. Rather than connecting to a single pool, the system operates through the combined efforts of many miners who are attached to 'nodes'. No need to register a user account, and any blocks that are mined are split on a PPLNS basis. Biggest benefits? Massively reduced chance of DDOS and coins are sent directly to your wallet.
How do I start mining?
Fine Tuning:
It is suggested to set a mining difficulty. This can be set by appending a value after your username, to calculate this value use the following formula:
Hash Rate * .0000011641
So if your hash rate is 34000 Kh/sec (34 Mh/sec) and your wallet address was AHT1tq3aDudrxdEmodpQsSfYUkZ2ZVCSW3, you'd want to set it up like so:
(34000 * .0000011641) = 0.0395794
Resulting in...
AHT1tq3aDudrxdEmodpQsSfYUkZ2ZVCSW3+0.0395794
Source Code: https://github.com/snogcel/p2pool-aiden
We need more nodes!!
I've got a P2Pool solution up and running. Need to bundle up the code and post it somewhere (will do that soon), but wanted to get some other options out there.
P2Pool: http://96.126.121.117:9405
P2Pool is a decentralized approach to pool mining. Rather than connecting to a single pool, the system operates through the combined efforts of many miners who are attached to 'nodes'. No need to register a user account, and any blocks that are mined are split on a PPLNS basis. Biggest benefits? Massively reduced chance of DDOS and coins are sent directly to your wallet.
How do I start mining?
- Point your miner to: stratum+tcp://96.126.121.117:9405
- Use your Aiden address as the user (you can set anything as the password, it doesn't matter).
Fine Tuning:
It is suggested to set a mining difficulty. This can be set by appending a value after your username, to calculate this value use the following formula:
Hash Rate * .0000011641
So if your hash rate is 34000 Kh/sec (34 Mh/sec) and your wallet address was AHT1tq3aDudrxdEmodpQsSfYUkZ2ZVCSW3, you'd want to set it up like so:
(34000 * .0000011641) = 0.0395794
Resulting in...
AHT1tq3aDudrxdEmodpQsSfYUkZ2ZVCSW3+0.0395794
Source Code: https://github.com/snogcel/p2pool-aiden
We need more nodes!!
April 05, 2014, 06:21:34 PM
I'll mine this until something better comes along... or until I finish coding my own cryptocurrency 
April 05, 2014, 06:20:11 PM
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
del *.bin
Color 0A
sgminer --nfactor 6 -o stratum+tcp://adn.minebig.com:3399 -u tygris85.r9280x -p x -I 19 -g 4 -w 256 --lookup-gap 2 --thread-concurrency 8192 --shaders 2048
I use this for my 4 x r9280x but it shows I 13 in sg miner screen, but I enter I 19 in my bat file
setx GPU_USE_SYNC_OBJECTS 1
del *.bin
Color 0A
sgminer --nfactor 6 -o stratum+tcp://adn.minebig.com:3399 -u tygris85.r9280x -p x -I 19 -g 4 -w 256 --lookup-gap 2 --thread-concurrency 8192 --shaders 2048
I use this for my 4 x r9280x but it shows I 13 in sg miner screen, but I enter I 19 in my bat file
April 05, 2014, 06:18:23 PM
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
del *.bin
Color 0A
sgminer --nfactor 6 -o stratum+tcp://adn.minebig.com:3399 -u xxx -p xxx -w 256 -I 13 -g 2 --lookup-gap 2 --gpu-powertune -20 --gpu-memclock 1400 --gpu-engine 1050 --thread-concurrency 8192
try this in your bat.file
setx GPU_USE_SYNC_OBJECTS 1
del *.bin
Color 0A
sgminer --nfactor 6 -o stratum+tcp://adn.minebig.com:3399 -u xxx -p xxx -w 256 -I 13 -g 2 --lookup-gap 2 --gpu-powertune -20 --gpu-memclock 1400 --gpu-engine 1050 --thread-concurrency 8192
try this in your bat.file
LOL I tried it with Color 0A that green is just too much also try it with a higher Intensity this miner goes up to 31 on my 7970 I have them at 19 on CGminer I use 13.
19 seems to be the sweet spot
Thanks for your advise, i will try it
Thanks for supporting the pool I built
April 05, 2014, 06:06:13 PM
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
del *.bin
Color 0A
sgminer --nfactor 6 -o stratum+tcp://adn.minebig.com:3399 -u xxx -p xxx -w 256 -I 13 -g 2 --lookup-gap 2 --gpu-powertune -20 --gpu-memclock 1400 --gpu-engine 1050 --thread-concurrency 8192
try this in your bat.file
setx GPU_USE_SYNC_OBJECTS 1
del *.bin
Color 0A
sgminer --nfactor 6 -o stratum+tcp://adn.minebig.com:3399 -u xxx -p xxx -w 256 -I 13 -g 2 --lookup-gap 2 --gpu-powertune -20 --gpu-memclock 1400 --gpu-engine 1050 --thread-concurrency 8192
try this in your bat.file
LOL I tried it with Color 0A that green is just too much also try it with a higher Intensity this miner goes up to 31 on my 7970 I have them at 19 on CGminer I use 13.
19 seems to be the sweet spot
Thanks for your advise, i will try it
April 05, 2014, 05:58:27 PM
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
del *.bin
Color 0A
sgminer --nfactor 6 -o stratum+tcp://adn.minebig.com:3399 -u xxx -p xxx -w 256 -I 13 -g 2 --lookup-gap 2 --gpu-powertune -20 --gpu-memclock 1400 --gpu-engine 1050 --thread-concurrency 8192
try this in your bat.file
setx GPU_USE_SYNC_OBJECTS 1
del *.bin
Color 0A
sgminer --nfactor 6 -o stratum+tcp://adn.minebig.com:3399 -u xxx -p xxx -w 256 -I 13 -g 2 --lookup-gap 2 --gpu-powertune -20 --gpu-memclock 1400 --gpu-engine 1050 --thread-concurrency 8192
try this in your bat.file
LOL I tried it with Color 0A that green is just too much also try it with a higher Intensity this miner goes up to 31 on my 7970 I have them at 19 on CGminer I use 13.
19 seems to be the sweet spot
April 05, 2014, 05:56:53 PM
IM SO BORED so many shitty coin appear you need to do all dev work that dev work is 0 need to change addnodes need to dl something new everytime when it appear on exchange i killed it if you are not decent dev don't make coins fking bull shit . everytime a new shit . i leave that shit
maybe this will be the new Standard,
more power, less energy costs and less temperature
but do what you want ...
April 05, 2014, 05:56:33 PM
IM SO BORED so many shitty coin appear you need to do all dev work that dev work is 0 need to change addnodes need to dl something new everytime when it appear on exchange i killed it if you are not decent dev don't make coins fking bull shit . everytime a new shit . i leave that shit
im so bored of noobs like u on this forum.
April 05, 2014, 05:56:07 PM
IM SO BORED so many shitty coin appear you need to do all dev work that dev work is 0 need to change addnodes need to dl something new everytime when it appear on exchange i killed it if you are not decent dev don't make coins fking bull shit . everytime a new shit . i leave that shit
Well..... you can not use CG miner for this coin you have to use sgminer with an N factor of 6
April 05, 2014, 05:53:35 PM
wts 150 ADN PM Offers
April 05, 2014, 05:51:16 PM
IM SO BORED so many shitty coin appear you need to do all dev work that dev work is 0 need to change addnodes need to dl something new everytime when it appear on exchange i killed it if you are not decent dev don't make coins fking bull shit . everytime a new shit . i leave that shit
April 05, 2014, 05:48:03 PM
any one can help me 
ep1989 do you use cgminer ?
if yes that is the reason ..
you Need a Special mining Software called sgminer
you will found the link to download them for free in this thread .. i mean page 2 or 3
April 05, 2014, 05:42:42 PM
any one can help me
April 05, 2014, 05:40:15 PM
Mine solo...diff is uber low. Even a potato plugged with a pcie riser would find a block now.
uhh no? its super hard to solo a block for 5x 280x. You really need a pool. Mined a few solo at the launch, but quickly turned out to be too high.
April 05, 2014, 05:39:24 PM
Mine solo...diff is uber low. Even a potato plugged with a pcie riser would find a block now.
April 05, 2014, 05:37:39 PM
im connected on the right adress and right worker but my worker is always offline but i mine WTF ?
? 
April 05, 2014, 05:36:31 PM
Mine still asks for the url:
edit: I also keep getting shares rejected because they are above target.
Code:
"pools" : [
{
"name" : "stratum+tcp://adn.minebig.com",
"url" : "stratum+tcp://adn.minebig.com:3399",
"user" : "Drasticraven.x",
"pass" : "xyz",
"pool-priority" : "0"
}
],
edit: I also keep getting shares rejected because they are above target.
that is because your nfactor is wrong
Thank you.
if you are using new sgminer you can add
"nfactor" = "6",
to your config file or --nfactor 6 to your bat file
I've decided to use a normal bat
p.s If you need help with graphic design / making sites pm me.
April 05, 2014, 05:25:58 PM
im logged on http://adn.minebig.com/index.php my cgminer said me im logged on my user but i have 0 shares 0 accepted and no hashrate on pool WTF ??
?? Jump to: