Topic: [ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!! - page 264. (Read 946650 times)
April 08, 2014, 07:57:47 PM
+1 good job
April 08, 2014, 07:54:38 PM
Phase 1 of the wallet update is complete!
This update is not mandatory but highly recommended.....
The following points have been adressed in this update:
phase 1: Checkpoints, stake modifiers and splash build error.
Increased version to 1.0.1.0 and updated minimum protocol version
I have tested this new build and it communicates with the old chain, you can send UTC from and to an un-updated wallet.
Once you delete everything except the wallet.dat file from the ultracoin folder, start the new client,the new client then updates the chain and the wallet
Step 1 : Type %appdata% in the windows search box (you see it when you click the start button)
Step 2 : Find the ultracoin folder
Step 3 : Copy the wallet.dat into a backup folder, do NOT delete or cut it!
Step 4 : Delete everything in the appdata/ultracoin, but DO NOT DELETE THE WALLET.DAT
Step 5 : Download this file http://www.speedyshare.com/SdmKg/ultracoin-1.0.1.0-windows-qt.rar
Step 6 : Extract the folder from the download somewhere,now drag the Ultracoin-qt.exe from the new download into your normal wallet folder (not into the
appdata/ultracoin folder but your wallet folder)
Step 7 : Click yes when it asks do you want to replace the file.
Step 8 : Start the wallet,it will now download the entire blockchain again (this will take some time).
DONE.
good job This update is not mandatory but highly recommended.....
The following points have been adressed in this update:
phase 1: Checkpoints, stake modifiers and splash build error.
Increased version to 1.0.1.0 and updated minimum protocol version
I have tested this new build and it communicates with the old chain, you can send UTC from and to an un-updated wallet.
Once you delete everything except the wallet.dat file from the ultracoin folder, start the new client,the new client then updates the chain and the wallet
Step 1 : Type %appdata% in the windows search box (you see it when you click the start button)
Step 2 : Find the ultracoin folder
Step 3 : Copy the wallet.dat into a backup folder, do NOT delete or cut it!
Step 4 : Delete everything in the appdata/ultracoin, but DO NOT DELETE THE WALLET.DAT
Step 5 : Download this file http://www.speedyshare.com/SdmKg/ultracoin-1.0.1.0-windows-qt.rar
Step 6 : Extract the folder from the download somewhere,now drag the Ultracoin-qt.exe from the new download into your normal wallet folder (not into the
appdata/ultracoin folder but your wallet folder)
Step 7 : Click yes when it asks do you want to replace the file.
Step 8 : Start the wallet,it will now download the entire blockchain again (this will take some time).
DONE.
April 08, 2014, 07:39:31 PM
Phase 1 of the wallet update is complete!
This update is not mandatory but highly recommended.....
The following points have been adressed in this update:
phase 1: Checkpoints, stake modifiers and splash build error.
Increased version to 1.0.1.0 and updated minimum protocol version
I have tested this new build and it communicates with the old chain, you can send UTC from and to an un-updated wallet.
Once you delete everything except the wallet.dat file from the ultracoin folder, start the new client,the new client then updates the chain and the wallet
Step 1 : Type %appdata% in the windows search box (you see it when you click the start button)
Step 2 : Find the ultracoin folder
Step 3 : Copy the wallet.dat into a backup folder, do NOT delete or cut it!
Step 4 : Delete everything in the appdata/ultracoin, but DO NOT DELETE THE WALLET.DAT
Step 5 : Download this file http://www.speedyshare.com/SdmKg/ultracoin-1.0.1.0-windows-qt.rar
Step 6 : Extract the folder from the download somewhere,now drag the Ultracoin-qt.exe from the new download into your normal wallet folder (not into the
appdata/ultracoin folder but your wallet folder)
Step 7 : Click yes when it asks do you want to replace the file.
Step 8 : Start the wallet,it will now download the entire blockchain again (this will take some time).
DONE.
This update is not mandatory but highly recommended.....
The following points have been adressed in this update:
phase 1: Checkpoints, stake modifiers and splash build error.
Increased version to 1.0.1.0 and updated minimum protocol version
I have tested this new build and it communicates with the old chain, you can send UTC from and to an un-updated wallet.
Once you delete everything except the wallet.dat file from the ultracoin folder, start the new client,the new client then updates the chain and the wallet
Step 1 : Type %appdata% in the windows search box (you see it when you click the start button)
Step 2 : Find the ultracoin folder
Step 3 : Copy the wallet.dat into a backup folder, do NOT delete or cut it!
Step 4 : Delete everything in the appdata/ultracoin, but DO NOT DELETE THE WALLET.DAT
Step 5 : Download this file http://www.speedyshare.com/SdmKg/ultracoin-1.0.1.0-windows-qt.rar
Step 6 : Extract the folder from the download somewhere,now drag the Ultracoin-qt.exe from the new download into your normal wallet folder (not into the
appdata/ultracoin folder but your wallet folder)
Step 7 : Click yes when it asks do you want to replace the file.
Step 8 : Start the wallet,it will now download the entire blockchain again (this will take some time).
DONE.
April 08, 2014, 06:11:37 PM
bumface - I think you should really update the OP if you want people to know about your updates here.
NEWS UPDATE section right up the top would be good.
(or point them to the news page in the main web site)
NEWS UPDATE section right up the top would be good.
(or point them to the news page in the main web site)
April 08, 2014, 05:48:28 PM
Would it be possible to limit the stratum connections to Nitro1 and force a failover?
But then nitro 2 will have over 50%.....same problem
most problems will be fixed after all wallet updates are done,
April 08, 2014, 05:35:32 PM
FIRST WALLET UPDATE TONIGHT
Windows only or mac and Linux also?
this one is only windows, but not a mandatory yet
Does it solve the long loading time?
April 08, 2014, 05:33:36 PM
Guys, please help to compile working Ultracoin-qt client for Debian Linux. One which posted in start topic just doesn't work.
and then created symlinks which are not found, for example
UPD.
Done. Successfully compiled Ultracoin wallet from source. Consider adding these steps to start post.
1. apt-get install qt4-qmake libqt4-dev build-essential libboost-dev libboost-system-dev \
libboost-filesystem-dev libboost-program-options-dev libboost-thread-dev \
libssl-dev libdb++-dev libminiupnpc-dev
2. git clone https://github.com/dx11/ultracoin
3. cd ultracoin
4. qmake "USE_UPNP=1" && make (compiling should take around 5 - 10 mins, depending from CPU speed)
5. ./Ultracoin-qt
Code:
./Ultracoin-qt
error while loading shared libraries: libminiupnpc.so.9: cannot open shared object file: No such file or directory
I checked all linked libraries with error while loading shared libraries: libminiupnpc.so.9: cannot open shared object file: No such file or directory
Code:
ldd ./Ultracoin-qt|grep found
libminiupnpc.so.9 =>not found
libboost_filesystem.so.1.49.0 => not found
libboost_program_options.so.1.49.0 => not found
libboost_thread.so.1.49.0 => not found
libminiupnpc.so.9 =>not found
libboost_filesystem.so.1.49.0 => not found
libboost_program_options.so.1.49.0 => not found
libboost_thread.so.1.49.0 => not found
and then created symlinks which are not found, for example
Code:
ln -s /usr/lib/x86_64-linux-gnu/libboost_thread.so.1.53.0 /usr/lib/x86_64-linux-gnu/libboost_thread.so.1.49.0
but then got Code:
$ ./Ultracoin-qt
./Ultracoin-qt: Symbol `_ZTVN5boost6detail16thread_data_baseE' has different size in shared object, consider re-linking
./Ultracoin-qt: symbol lookup error: ./Ultracoin-qt: undefined symbol: _ZN5boost11filesystem34path21wchar_t_codecvt_facetEv
./Ultracoin-qt: Symbol `_ZTVN5boost6detail16thread_data_baseE' has different size in shared object, consider re-linking
./Ultracoin-qt: symbol lookup error: ./Ultracoin-qt: undefined symbol: _ZN5boost11filesystem34path21wchar_t_codecvt_facetEv
UPD.
Done. Successfully compiled Ultracoin wallet from source. Consider adding these steps to start post.
1. apt-get install qt4-qmake libqt4-dev build-essential libboost-dev libboost-system-dev \
libboost-filesystem-dev libboost-program-options-dev libboost-thread-dev \
libssl-dev libdb++-dev libminiupnpc-dev
2. git clone https://github.com/dx11/ultracoin
3. cd ultracoin
4. qmake "USE_UPNP=1" && make (compiling should take around 5 - 10 mins, depending from CPU speed)
5. ./Ultracoin-qt
Hello, quick guide 2:
aptitude install libminiupnpc-dev libboost-all-dev build-essential libssl-dev libdb-dev libdb++-dev libqrencode-dev
These considering you have qt4creator and qmake... if not I prefer installing all qt IDE:
aptitude install qt4creator libqt4-dev
So this is it...
You will be able to compile it and find a .jpg file is missing in "bitcoin.qrc", so just create the file and compile is done.
Should do it
April 08, 2014, 05:31:21 PM
FIRST WALLET UPDATE TONIGHT
Windows only or mac and Linux also?
this one is only windows, but not a mandatory yet
April 08, 2014, 05:20:11 PM
FIRST WALLET UPDATE TONIGHT
Windows only or mac and Linux also?
April 08, 2014, 05:11:54 PM
Would it be possible to limit the stratum connections to Nitro1 and force a failover?
But then nitro 2 will have over 50%.....same problem
April 08, 2014, 05:03:12 PM
Would it be possible to limit the stratum connections to Nitro1 and force a failover?
April 08, 2014, 04:53:16 PM
OK so the issue is now.....
When nitro 1 goes down people don't fail over to leet, greek, or PM. All the hash rate goes to nitro 2. Which then goes over the 50 percent mark.
This really isn't working
BUMFACE - Cant you do something about this ??
When nitro 1 goes down people don't fail over to leet, greek, or PM. All the hash rate goes to nitro 2. Which then goes over the 50 percent mark.
This really isn't working
BUMFACE - Cant you do something about this ??
This is probably the main reason why the price is so low - People cant mine it and they don't trade it because they hear about all the problems (That aren't getting fixed.
I agree it was a good idea to stop people signing up for nitro but it is going to take weeks for loads of other people to sign up with the other pools. But then again they will be put off because of all the orphan chat with the the other pool..
So the hundreds of the other miners are in the mean time getting very bored of getting orphans and are leaving faster than people joining. So the people that really want to mine ultras are getting 50% less just because they really like the coin but cant sign up anywhere else to get less orphans
Rant over
It is a great coin, i don't want it to fail
April 08, 2014, 04:46:58 PM
OK so the issue is now.....
When nitro 1 goes down people don't fail over to leet, greek, or PM. All the hash rate goes to nitro 2. Which then goes over the 50 percent mark.
This really isn't working
BUMFACE - Cant you do something about this ??
When nitro 1 goes down people don't fail over to leet, greek, or PM. All the hash rate goes to nitro 2. Which then goes over the 50 percent mark.
This really isn't working
BUMFACE - Cant you do something about this ??
This is probably the main reason why the price is so low - People cant mine it and they don't trade it because they hear about all the problems (That aren't getting fixed.
I agree it was a good idea to stop people signing up for nitro but it is going to take weeks for loads of other people to sign up with the other pools. But then again they will be put off because of all the orphan chat with the the other pool..
So the hundreds of the other miners are in the mean time getting very bored of getting orphans and are leaving faster than people joining. So the people that really want to mine ultras are getting 50% less just because they really like the coin but cant sign up anywhere else to get less orphans
April 08, 2014, 04:36:03 PM
OK so the issue is now.....
When nitro 1 goes down people don't fail over to leet, greek, or PM. All the hash rate goes to nitro 2. Which then goes over the 50 percent mark.
This really isn't working
BUMFACE - Cant you do something about this ??
When nitro 1 goes down people don't fail over to leet, greek, or PM. All the hash rate goes to nitro 2. Which then goes over the 50 percent mark.
This really isn't working
BUMFACE - Cant you do something about this ??
April 08, 2014, 04:35:29 PM
Awesome! Thanks for the contribution.
And for those interested and/or for those who have not seen, a Reddit Tipper Bot is in Public Beta as we speak. Pretty cool stuff honestly. Have a look here: http://www.reddit.com/r/official_utc/comments/22e8y6/ultracoin_reddit_tip_bot_in_open_beta/
And for those interested and/or for those who have not seen, a Reddit Tipper Bot is in Public Beta as we speak. Pretty cool stuff honestly. Have a look here: http://www.reddit.com/r/official_utc/comments/22e8y6/ultracoin_reddit_tip_bot_in_open_beta/
** I've just tipped you!
This is pretty awesome. I actually like to encourage EVERYONE to use the official_utc subreddit more often now.
If I see anything that's helpful, uber funny etc, I'll tip you. Everyone can do the same. Start tipping each other!
It even gives an incentive for people to be more active & helpful. WIN:WIN right there.
How to get started! Contribute & get tipped in UTC!
1. Create a reddit account if you don't already have one.
http://www.reddit.com/
2. Use following link and just hit send to register:
http://www.reddit.com/message/compose?to=ultracoin_tip&subject=register&message=%2Bregister
3. Check your wallet address & balance by sending the following message then later checking your inbox:
http://www.reddit.com/message/compose?to=ultracoin_tip&subject=info&message=%2Binfo
4. Deposit some UTC to your tip bot wallet address from the info you received.
5. Start tipping someone by writing a comment to a post/reply with:
+/u/ultracoin_tip
e.g. +/u/ultracoin_tip 100 utc
Please can this be added to the Ultracoin website and page 1 of the thread?
Cheers
KC
+1
I have now started posting new updates in official_utc subreddit also.
http://www.reddit.com/r/official_utc/
April 08, 2014, 03:33:20 PM
0.6 btc raised so far
the adres for donations to the new devs is : 1H8rUGC3KMv7XnkJddD7XJRJQMDqmex7He
April 08, 2014, 03:04:37 PM
0.6 btc raised so far
April 08, 2014, 03:03:10 PM
0.6 btc raised so far
April 08, 2014, 03:02:25 PM
Awesome! Thanks for the contribution.
And for those interested and/or for those who have not seen, a Reddit Tipper Bot is in Public Beta as we speak. Pretty cool stuff honestly. Have a look here: http://www.reddit.com/r/official_utc/comments/22e8y6/ultracoin_reddit_tip_bot_in_open_beta/
And for those interested and/or for those who have not seen, a Reddit Tipper Bot is in Public Beta as we speak. Pretty cool stuff honestly. Have a look here: http://www.reddit.com/r/official_utc/comments/22e8y6/ultracoin_reddit_tip_bot_in_open_beta/
** I've just tipped you!
This is pretty awesome. I actually like to encourage EVERYONE to use the official_utc subreddit more often now.
If I see anything that's helpful, uber funny etc, I'll tip you. Everyone can do the same. Start tipping each other!
It even gives an incentive for people to be more active & helpful. WIN:WIN right there.
How to get started! Contribute & get tipped in UTC!
1. Create a reddit account if you don't already have one.
http://www.reddit.com/
2. Use following link and just hit send to register:
http://www.reddit.com/message/compose?to=ultracoin_tip&subject=register&message=%2Bregister
3. Check your wallet address & balance by sending the following message then later checking your inbox:
http://www.reddit.com/message/compose?to=ultracoin_tip&subject=info&message=%2Binfo
4. Deposit some UTC to your tip bot wallet address from the info you received.
5. Start tipping someone by writing a comment to a post/reply with:
+/u/ultracoin_tip
e.g. +/u/ultracoin_tip 100 utc
Please can this be added to the Ultracoin website and page 1 of the thread?
Cheers
KC
April 08, 2014, 03:01:41 PM
FIRST WALLET UPDATE TONIGHT
Raised 2BTC for devs? Jump to: