Running R9 270X, R9270XD52GXOCV2, config as follows for anyone having issues, Yes, Khs is much lower, I am still mining the SAME AMOUNT of coins at higher N-factor
ultracoinminer --scrypt-jane -I 12 --sj-nfmin 4 --sj-nfmax 30 --lookup-gap 3 --sj-time 1388361600 --gpu-engine 1080 --gpu-memclock 1500 --no-submit-stale
Giving me 32khs per card without any issues
Topic: [ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!! - page 270. (Read 946650 times)
April 07, 2014, 07:44:12 AM
April 07, 2014, 07:34:39 AM
Quote
Seems this recent N-factor made Ultracoin much more difficult to mine for many people. (especially the RAM requirement)
Heavycoin is very 750 Ti friendly last time I checked. You can get around 12-13Mh/s. Worth checking out for you maybe.
Heavycoin is very 750 Ti friendly last time I checked. You can get around 12-13Mh/s. Worth checking out for you maybe.
With Cudaminer?
My notebook 660M gives me now only 7Kh/s with cudaminer.
With ccminer @ http://hvc.1gh.com/
But yeah, no more HVC talk here.
Ah ok, not doing Scrypt, unfortunately. Should drop to Khash with a switch of coins then.
April 07, 2014, 07:28:53 AM
too many words to read! what's the key point?
UPDATE SUMMARY
1. Bumface's real name is Michael. See his photo & rest of UTC team here: http://ultracoin.net/aboututc.html
2. Michael met many new people and started building bridges with some powerful people. This will continue.
3. New portal is already in the works that will allow easy arbitration between exchanges using Ultracoin & Minecraft plug-in for in-game purchases planned.
4. Upcoming fork to lower block reward from 50 to 20 & extend the N factor change schedule to allow longer GPU mining support.
5. New much needed wallet update will come allowing more flexible POS, some client enhancements and bug fixes.
6. UTC Team events / work may be funded by participating pools via share of fees & of course your generous donations.
7. Youtube video uploaded. Michael is second from the left. http://www.youtube.com/watch?v=-qMOcFzF2c4
Full update from Michael = https://bitcointalksearch.org/topic/m.6106349
Ok where did John get that picture from? we all know, the males in crypto are ugly nerds.
That's why I haven't put up my photo yet.
April 07, 2014, 07:25:35 AM
@jakiman,
your settings should work on 280 dualx, right? thanks
your settings should work on 280 dualx, right? thanks
I have a rig with 4 r9 280x, with yacminer 3.5.0 the monitor(16x pci card) card does not start, all other cards run at 55kh/s with no errors. I put the widows7 visual effects to minimum but it did not help. Any idea is appreciated
Same here. I also have 4x 280x dual-x.
Best I could get out of it, was 47 kh/s and 40 WU per card with no HW.
And I tried with 12 GB ram..
April 07, 2014, 07:24:38 AM
Quote
Seems this recent N-factor made Ultracoin much more difficult to mine for many people. (especially the RAM requirement)
Heavycoin is very 750 Ti friendly last time I checked. You can get around 12-13Mh/s. Worth checking out for you maybe.
Heavycoin is very 750 Ti friendly last time I checked. You can get around 12-13Mh/s. Worth checking out for you maybe.
With Cudaminer?
My notebook 660M gives me now only 7Kh/s with cudaminer.
With ccminer @ http://hvc.1gh.com/
But yeah, no more HVC talk here.
April 07, 2014, 07:22:04 AM
too many words to read! what's the key point?
UPDATE SUMMARY
1. Bumface's real name is Michael. See his photo & rest of UTC team here: http://ultracoin.net/aboututc.html
2. Michael met many new people and started building bridges with some powerful people. This will continue.
3. New portal is already in the works that will allow easy arbitration between exchanges using Ultracoin & Minecraft plug-in for in-game purchases planned.
4. Upcoming fork to lower block reward from 50 to 20 & extend the N factor change schedule to allow longer GPU mining support.
5. New much needed wallet update will come allowing more flexible POS, some client enhancements and bug fixes.
6. UTC Team events / work may be funded by participating pools via share of fees & of course your generous donations.
7. Youtube video uploaded. Michael is second from the left. http://www.youtube.com/watch?v=-qMOcFzF2c4
Full update from Michael = https://bitcointalksearch.org/topic/m.6106349
Ok where did John get that picture from? we all know, the males in crypto are ugly nerds.
April 07, 2014, 07:19:45 AM
Quote
Seems this recent N-factor made Ultracoin much more difficult to mine for many people. (especially the RAM requirement)
Heavycoin is very 750 Ti friendly last time I checked. You can get around 12-13Mh/s. Worth checking out for you maybe.
Heavycoin is very 750 Ti friendly last time I checked. You can get around 12-13Mh/s. Worth checking out for you maybe.
With Cudaminer?
My notebook 660M gives me now only 7Kh/s with cudaminer.
April 07, 2014, 06:51:59 AM
too many words to read! what's the key point?
UPDATE SUMMARY
1. Bumface's real name is Michael. See his photo & rest of UTC team here: http://ultracoin.net/aboututc.html
2. Michael met many new people and started building bridges with some powerful people. This will continue.
3. New portal is already in the works that will allow easy arbitration between exchanges using Ultracoin & Minecraft plug-in for in-game purchases planned.
4. Upcoming fork to lower block reward from 50 to 20 & extend the N factor change schedule to allow longer GPU mining support.
5. New much needed wallet update will come allowing more flexible POS, some client enhancements and bug fixes.
6. UTC Team events / work may be funded by participating pools via share of fees & of course your generous donations.
7. Youtube video uploaded. Michael is second from the left. http://www.youtube.com/watch?v=-qMOcFzF2c4
Full update from Michael = https://bitcointalksearch.org/topic/m.6106349
April 07, 2014, 06:34:11 AM
April 07, 2014, 06:10:41 AM
And I'm out, my piddly little 750tis pulling 15kh just isn't worth it now.
Half my coins are in sell orders, the other half I am holding for POS.
Back to NOBL until someone gets X11 working with Cudaminer.
Half my coins are in sell orders, the other half I am holding for POS.
Back to NOBL until someone gets X11 working with Cudaminer.
Seems this recent N-factor made Ultracoin much more difficult to mine for many people. (especially the RAM requirement)
Heavycoin is very 750 Ti friendly last time I checked. You can get around 12-13Mh/s. Worth checking out for you maybe.
April 07, 2014, 06:02:42 AM
And I'm out, my piddly little 750tis pulling 15kh just isn't worth it now.
Half my coins are in sell orders, the other half I am holding for POS.
Back to NOBL until someone gets X11 working with Cudaminer.
Half my coins are in sell orders, the other half I am holding for POS.
Back to NOBL until someone gets X11 working with Cudaminer.
April 07, 2014, 05:38:17 AM
April 07, 2014, 05:13:04 AM
April 07, 2014, 05:09:23 AM
Hi 
Please help me setting yacoin with card 280x GPU ! I not running GPU with yacoin ! Thank
Please help me setting yacoin with card 280x GPU ! I not running GPU with yacoin ! ThankHave you tried my settings that most people are happily using with their 280x?
https://bitcointalksearch.org/topic/m.6101155
April 07, 2014, 05:02:29 AM
Hi Please help me setting yacoin with card 280x GPU ! I not running GPU with yacoin ! Thank
Please help me setting yacoin with card 280x GPU ! I not running GPU with yacoin ! ThankHave you tried my settings that most people are happily using with their 280x?
https://bitcointalksearch.org/topic/m.6101155
April 07, 2014, 05:00:07 AM
just tweaking my yacminer now for R9 290's
bufsize for thread @ 3624MB based on buffer-size
bufsize for thread @ 3624MB based on buffer-size
LG=3
-R = 10752
or
LG =4
-X = 32 or 128 or whatever you please
I think LG =3 will be slightly faster. let me know if I am right
Hi
Please help me setting yacoin with card 280x GPU ! I not running GPU with yacoin ! Thank 
April 07, 2014, 04:59:17 AM
CT down guys ?
April 07, 2014, 04:55:04 AM
@jakiman,
your settings should work on 280 dualx, right? thanks
your settings should work on 280 dualx, right? thanks
I have a rig with 4 r9 280x, with yacminer 3.5.0 the monitor(16x pci card) card does not start, all other cards run at 55kh/s with no errors. I put the widows7 visual effects to minimum but it did not help. Any idea is appreciated
April 07, 2014, 04:49:59 AM
Thanks for this quick tutorial jakiman. Buffer size did not work on my main card, so I had to lower it to 2432 though. Some utc love coming your way!
Actually I had a hunch that if it is my main card, it is probably out of memory, due to some visual stuff. I tuned down all the visual things in windows 7 and 2560 is now a go!
Actually I had a hunch that if it is my main card, it is probably out of memory, due to some visual stuff. I tuned down all the visual things in windows 7 and 2560 is now a go!
Woohoo. I'm glad you got it sorted and also glad I was of some help.
Thank you for the UTC! You were the first and only one to tip me for it...
April 07, 2014, 03:36:01 AM
wow Go nitro , whats that 80% hash speed
man I have 0% mining Fee's and I am seriously thinking of going back to Nitro with 3% fee's just because their are no Orphans !!! half the stuff I mine gets given to Nitro any how !!!
out of 5 blocks 2 blocks I got to keep ....
So if all miners can mine at Nitro, will u still have no orphans? man I have 0% mining Fee's and I am seriously thinking of going back to Nitro with 3% fee's just because their are no Orphans !!! half the stuff I mine gets given to Nitro any how !!!
out of 5 blocks 2 blocks I got to keep ....
Otherwise open registration again and we all mine at Nitro.
Jump to: