my 290 would not work with regular scrypt on 4gb ram. it had to have 8gb. i was getting 'out of resources' messages or somethin along those lines in cgminer.
more system ram = higher TC
Topic: [ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!! - page 397. (Read 946654 times)
March 08, 2014, 12:44:23 PM
March 08, 2014, 12:40:41 PM
Ive try per 2048 from/t
5952 (my init settings generater by cgminer/no setting .bin file)
8000
10048
12096
14144 (last ussuable)
16192 (wont run cgminer)
Im on 2GB RAM on system. This ram is NOT user due minning. GPU RAM is something different.
Actually when mining this coin amount of dram makes a huge difference.
March 08, 2014, 12:35:47 PM
Somebody have omptimal cmos settings with r9 290 sapphire cards.
When i get smos running jane-scrypt i only get 50.00hash per card. If i tweek it's 40.00 or even 30.00.
The fact it's such i round number thinks it's not only a gpu setting but also like a maximum or something.
Hope somebody can help me.
When i get smos running jane-scrypt i only get 50.00hash per card. If i tweek it's 40.00 or even 30.00.
The fact it's such i round number thinks it's not only a gpu setting but also like a maximum or something.
Hope somebody can help me.
Seems unlikely you need to change any of your bios settings. I feel like we've tried to help you before. what happen with the last settings we gave you? What are you using right now?
That system works perfect. No hardware errors and running solid about 103 hash per gpu
I also have a smos / bamt system that now makes doggie.
With help here I have installed a smos jane-scrypt on usb now, and that also works. Only don't know the best settings for that one and i'm only getting mak 50.00 hash.
I don't think it's a bios issue because with normal scrypt bamt it runs perfectly, with 880hash per gpu
March 08, 2014, 12:26:50 PM
Hi, I need help to optimize my configs.
290 65 Kh/s
--sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --thread-concurrency 34234 -I 12 -w 512 -g 1 --queue 0 --no-submit-stale --scan-time 1 --lookup-gap 3
7970 130Kh/s
--sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --thread-concurrency 16384 -I 12 -w 512 -g 2 --queue 0 --no-submit-stale --scan-time 1 --lookup-gap 3
6970 45Kh/s
--sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --thread-concurrency 16384 -I 12 -w 256 -g 2 --queue 0 --no-submit-stale --scan-time 1 --lookup-gap 3
Leav you walled adress if you have any idea what will help me.
290 65 Kh/s
--sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --thread-concurrency 34234 -I 12 -w 512 -g 1 --queue 0 --no-submit-stale --scan-time 1 --lookup-gap 3
7970 130Kh/s
--sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --thread-concurrency 16384 -I 12 -w 512 -g 2 --queue 0 --no-submit-stale --scan-time 1 --lookup-gap 3
6970 45Kh/s
--sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --thread-concurrency 16384 -I 12 -w 256 -g 2 --queue 0 --no-submit-stale --scan-time 1 --lookup-gap 3
Leav you walled adress if you have any idea what will help me.
r9 290 173kh/s
--scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 256 -g 1 -I 17 --thread-concurrency 45056 --gpu-powertune 20 --temp-target 85 --temp-overheat 95 --temp-cutoff 99 --auto-gpu --gpu-engine 1040 --gpu-memclock 1250 --gpu-fan 40-60 --no-submit-stale --lookup-gap 2 --expiry 10 --scan-time 1 --queue 0
increase your fan speed accordingly to temps that you desire. this is my optimal settings for my MSI r9 290 reference
March 08, 2014, 12:23:50 PM
Hello,
Im on 7850 and Im on 10% agains my scrypt rate.
On scrypt i have like 360k/s
On scrypt-jane I can get 30-40kH/s without HW arrors.
Ive tested several pools and three version of cgminer. Im on linux.
Here is sample with two intensity settings:
I can be on I 11 without HW, I12 will het HW. I18 is my common scrypt range, but impossible without HW.
No idea what to try more. Ive been googling any trying like 50 different etting for last 4 days. Any tips?
People are reporting like 70-80% of scrypt range. I cant go above 10%.
Also tips for 7870 (R270x) will be great, Im on 90KH/s with those.
Im on 7850 and Im on 10% agains my scrypt rate.
On scrypt i have like 360k/s
On scrypt-jane I can get 30-40kH/s without HW arrors.
Ive tested several pools and three version of cgminer. Im on linux.
Here is sample with two intensity settings:
Code:
"scrypt-jane" : true,
"sj-nfmin" : "4",
"sj-nfmax" : "30",
"sj-time" : "1388361600",
"intensity" : "11,18",
"gpu-engine" : "1050",
"gpu-platform" : "0",
"gpu-memclock" : "1500",
"vectors" : "1",
"worksize" : "256",
"lookup-gap" : "2",
"thread-concurrency" : "8192"
"sj-nfmin" : "4",
"sj-nfmax" : "30",
"sj-time" : "1388361600",
"intensity" : "11,18",
"gpu-engine" : "1050",
"gpu-platform" : "0",
"gpu-memclock" : "1500",
"vectors" : "1",
"worksize" : "256",
"lookup-gap" : "2",
"thread-concurrency" : "8192"
I can be on I 11 without HW, I12 will het HW. I18 is my common scrypt range, but impossible without HW.
Code:
GPU 0: | 31.73K/31.78Kh/s | A:320 R:32 HW: 0 WU:36.3/m I:11
GPU 1: | 63.81K/63.74Kh/s | A:192 R: 0 HW:58 WU:13.8/m I:18
Ive tested also several memcore/engine settings (lower, higher). TC8192/LG2 seems fine or I can go to TC14144/LG8.GPU 1: | 63.81K/63.74Kh/s | A:192 R: 0 HW:58 WU:13.8/m I:18
No idea what to try more. Ive been googling any trying like 50 different etting for last 4 days. Any tips?
People are reporting like 70-80% of scrypt range. I cant go above 10%.
Also tips for 7870 (R270x) will be great, Im on 90KH/s with those.
I'm not sure about the 7850, I assume you should be able to get around 60 out of it but I don't know the settings for it. Your 7870 is pretty much running at expected rates. Try raising your thread concurrency without changing your lookup gap on the 7850. Also, how much RAM does this system have and how many GPU are in it?
Ive try per 2048 from/t
5952 (my init settings generater by cgminer/no setting .bin file)
8000
10048
12096
14144 (last ussuable)
16192 (wont run cgminer)
Im on 2GB RAM on system. This ram is NOT user due minning. GPU RAM is something different.
Well you can either except you're wrong about system RAM and stop beating your head against a wall, or you can not listen to someone who's been involved in tuning a whole lot of these cards. Your limitation is your system RAM. The current N-factor doesn't like much less than 4 GB system RAM or it starts complaining. You won't see it as being used when you look at your resource monitor, but it is.
March 08, 2014, 12:16:45 PM
There is no spoon.
There was no cup (go read investopedia again about what exactly is a cup with handle, this was no cup by any measure).
Disclaimer: this is NOT an investment advice. Therefore if things happen differently do not come back and tell I was wrong. I am only presenting what is a possible outlook based on the best of my current market knowledge as well as peer opinions.
This is by no means a prediction that intends to be 100% accurate.
The intent is to get some feedback.
There are chances that BTC will be going to 550 soon, then bounce to around 600, then dip again to around 480.
All within the next 2 weeks.
There is the possibility that the 2 next weeks be bearish for UTC as well as every other alt, so don't be afraid to hold, baghold and switch off your computer if you're afraid you could panic sell.
Everything will come to an end, then up again and for the better.
One word: HOLD.
No one needs to sell at a loss, no one.
There was no cup (go read investopedia again about what exactly is a cup with handle, this was no cup by any measure).
Disclaimer: this is NOT an investment advice. Therefore if things happen differently do not come back and tell I was wrong. I am only presenting what is a possible outlook based on the best of my current market knowledge as well as peer opinions.
This is by no means a prediction that intends to be 100% accurate.
The intent is to get some feedback.
There are chances that BTC will be going to 550 soon, then bounce to around 600, then dip again to around 480.
All within the next 2 weeks.
There is the possibility that the 2 next weeks be bearish for UTC as well as every other alt, so don't be afraid to hold, baghold and switch off your computer if you're afraid you could panic sell.
Everything will come to an end, then up again and for the better.
One word: HOLD.
No one needs to sell at a loss, no one.
This is SO important. The BTC price is a bellweather for the alt coin market.
[Same disclaimer as above]
I happen to like your comments and positive energy. Keep up doing what you are doing so well because we'll probably be going downer and downer until there are tears and blood in the streets.
Capitulation has not happened yet, do not forget this. So the best course of events is not to be at 100% in coins. Keep at least 50% fiat for when everybody will talk about suicide, divorce, repossessions etc. etc. This could take as long as 2 more months.
Until then: do not touch any of your cash and do not sell any of your coins.
HOLD!
March 08, 2014, 12:13:30 PM
Has there been any further chat to reducing the POS timeline for interest, and the time that the wallet needs to be online to qualify for this?
This would make the coin much more attractive for investing and holding short term.
This would make the coin much more attractive for investing and holding short term.
March 08, 2014, 12:13:09 PM
Hello,
Im on 7850 and Im on 10% agains my scrypt rate.
On scrypt i have like 360k/s
On scrypt-jane I can get 30-40kH/s without HW arrors.
Ive tested several pools and three version of cgminer. Im on linux.
Here is sample with two intensity settings:
I can be on I 11 without HW, I12 will het HW. I18 is my common scrypt range, but impossible without HW.
No idea what to try more. Ive been googling any trying like 50 different etting for last 4 days. Any tips?
People are reporting like 70-80% of scrypt range. I cant go above 10%.
Also tips for 7870 (R270x) will be great, Im on 90KH/s with those.
Im on 7850 and Im on 10% agains my scrypt rate.
On scrypt i have like 360k/s
On scrypt-jane I can get 30-40kH/s without HW arrors.
Ive tested several pools and three version of cgminer. Im on linux.
Here is sample with two intensity settings:
Code:
"scrypt-jane" : true,
"sj-nfmin" : "4",
"sj-nfmax" : "30",
"sj-time" : "1388361600",
"intensity" : "11,18",
"gpu-engine" : "1050",
"gpu-platform" : "0",
"gpu-memclock" : "1500",
"vectors" : "1",
"worksize" : "256",
"lookup-gap" : "2",
"thread-concurrency" : "8192"
"sj-nfmin" : "4",
"sj-nfmax" : "30",
"sj-time" : "1388361600",
"intensity" : "11,18",
"gpu-engine" : "1050",
"gpu-platform" : "0",
"gpu-memclock" : "1500",
"vectors" : "1",
"worksize" : "256",
"lookup-gap" : "2",
"thread-concurrency" : "8192"
I can be on I 11 without HW, I12 will het HW. I18 is my common scrypt range, but impossible without HW.
Code:
GPU 0: | 31.73K/31.78Kh/s | A:320 R:32 HW: 0 WU:36.3/m I:11
GPU 1: | 63.81K/63.74Kh/s | A:192 R: 0 HW:58 WU:13.8/m I:18
Ive tested also several memcore/engine settings (lower, higher). TC8192/LG2 seems fine or I can go to TC14144/LG8.GPU 1: | 63.81K/63.74Kh/s | A:192 R: 0 HW:58 WU:13.8/m I:18
No idea what to try more. Ive been googling any trying like 50 different etting for last 4 days. Any tips?
People are reporting like 70-80% of scrypt range. I cant go above 10%.
Also tips for 7870 (R270x) will be great, Im on 90KH/s with those.
I'm not sure about the 7850, I assume you should be able to get around 60 out of it but I don't know the settings for it. Your 7870 is pretty much running at expected rates. Try raising your thread concurrency without changing your lookup gap on the 7850. Also, how much RAM does this system have and how many GPU are in it?
Ive try per 2048 from/t
5952 (my init settings generater by cgminer/no setting .bin file)
8000
10048
12096
14144 (last ussuable)
16192 (wont run cgminer)
Im on 2GB RAM on system. This ram is NOT user due minning. GPU RAM is something different.
March 08, 2014, 12:01:39 PM
Just a quick note: Crypto-Trade.com has created a 25,000 UTC Matching Challenge for the UTC Core Developing Fund!
Collect 7,500 UTC and we will donate 25,000 UTC on top of it to back future UTC developments.
Link: https://bitcointalksearch.org/topic/m.5576837
Collect 7,500 UTC and we will donate 25,000 UTC on top of it to back future UTC developments.
Link: https://bitcointalksearch.org/topic/m.5576837
For those that didn't see it this is the offer from Crypto-Trade.com yesterday. Please make a donation big or small to the fund address - UQYa72meX9VCE4GYMu8uXu5YGipU9pTEzS which also published in the post - https://bitcointalksearch.org/topic/m.5576837
The UTC community is always at its best when facing a challenge.
I have made a deposit of 250 UTC
KC
Don't forget this offer guys & gals, we are at 447 UTC at the moment. If you believe in UTC then it would be silly to let this offer fall through our grasp?
KC
March 08, 2014, 11:52:32 AM
I've sent a request to https://www.altoutlet.com/ about adding Ultracoin as a usable currency.
Waiting for a response!
Waiting for a response!
March 08, 2014, 11:50:45 AM
Hello,
Im on 7850 and Im on 10% agains my scrypt rate.
On scrypt i have like 360k/s
On scrypt-jane I can get 30-40kH/s without HW arrors.
Ive tested several pools and three version of cgminer. Im on linux.
Here is sample with two intensity settings:
I can be on I 11 without HW, I12 will het HW. I18 is my common scrypt range, but impossible without HW.
No idea what to try more. Ive been googling any trying like 50 different etting for last 4 days. Any tips?
People are reporting like 70-80% of scrypt range. I cant go above 10%.
Also tips for 7870 (R270x) will be great, Im on 90KH/s with those.
Im on 7850 and Im on 10% agains my scrypt rate.
On scrypt i have like 360k/s
On scrypt-jane I can get 30-40kH/s without HW arrors.
Ive tested several pools and three version of cgminer. Im on linux.
Here is sample with two intensity settings:
Code:
"scrypt-jane" : true,
"sj-nfmin" : "4",
"sj-nfmax" : "30",
"sj-time" : "1388361600",
"intensity" : "11,18",
"gpu-engine" : "1050",
"gpu-platform" : "0",
"gpu-memclock" : "1500",
"vectors" : "1",
"worksize" : "256",
"lookup-gap" : "2",
"thread-concurrency" : "8192"
"sj-nfmin" : "4",
"sj-nfmax" : "30",
"sj-time" : "1388361600",
"intensity" : "11,18",
"gpu-engine" : "1050",
"gpu-platform" : "0",
"gpu-memclock" : "1500",
"vectors" : "1",
"worksize" : "256",
"lookup-gap" : "2",
"thread-concurrency" : "8192"
I can be on I 11 without HW, I12 will het HW. I18 is my common scrypt range, but impossible without HW.
Code:
GPU 0: | 31.73K/31.78Kh/s | A:320 R:32 HW: 0 WU:36.3/m I:11
GPU 1: | 63.81K/63.74Kh/s | A:192 R: 0 HW:58 WU:13.8/m I:18
Ive tested also several memcore/engine settings (lower, higher). TC8192/LG2 seems fine or I can go to TC14144/LG8.GPU 1: | 63.81K/63.74Kh/s | A:192 R: 0 HW:58 WU:13.8/m I:18
No idea what to try more. Ive been googling any trying like 50 different etting for last 4 days. Any tips?
People are reporting like 70-80% of scrypt range. I cant go above 10%.
Also tips for 7870 (R270x) will be great, Im on 90KH/s with those.
I'm not sure about the 7850, I assume you should be able to get around 60 out of it but I don't know the settings for it. Your 7870 is pretty much running at expected rates. Try raising your thread concurrency without changing your lookup gap on the 7850. Also, how much RAM does this system have and how many GPU are in it?
March 08, 2014, 11:48:19 AM
now, i have 17.5% of scrypt hash rate and it should be okay =)
March 08, 2014, 11:41:40 AM
Hello,
Im on 7850 and Im on 10% agains my scrypt rate.
On scrypt i have like 360k/s
On scrypt-jane I can get 30-40kH/s without HW arrors.
Ive tested several pools and three version of cgminer. Im on linux.
Here is sample with two intensity settings:
I can be on I 11 without HW, I12 will het HW. I18 is my common scrypt range, but impossible without HW.
No idea what to try more. Ive been googling any trying like 50 different etting for last 4 days. Any tips?
People are reporting like 70-80% of scrypt range. I cant go above 10%.
Also tips for 7870 (R270x) will be great, Im on 90KH/s with those.
Im on 7850 and Im on 10% agains my scrypt rate.
On scrypt i have like 360k/s
On scrypt-jane I can get 30-40kH/s without HW arrors.
Ive tested several pools and three version of cgminer. Im on linux.
Here is sample with two intensity settings:
Code:
"scrypt-jane" : true,
"sj-nfmin" : "4",
"sj-nfmax" : "30",
"sj-time" : "1388361600",
"intensity" : "11,18",
"gpu-engine" : "1050",
"gpu-platform" : "0",
"gpu-memclock" : "1500",
"vectors" : "1",
"worksize" : "256",
"lookup-gap" : "2",
"thread-concurrency" : "8192"
"sj-nfmin" : "4",
"sj-nfmax" : "30",
"sj-time" : "1388361600",
"intensity" : "11,18",
"gpu-engine" : "1050",
"gpu-platform" : "0",
"gpu-memclock" : "1500",
"vectors" : "1",
"worksize" : "256",
"lookup-gap" : "2",
"thread-concurrency" : "8192"
I can be on I 11 without HW, I12 will het HW. I18 is my common scrypt range, but impossible without HW.
Code:
GPU 0: | 31.73K/31.78Kh/s | A:320 R:32 HW: 0 WU:36.3/m I:11
GPU 1: | 63.81K/63.74Kh/s | A:192 R: 0 HW:58 WU:13.8/m I:18
Ive tested also several memcore/engine settings (lower, higher). TC8192/LG2 seems fine or I can go to TC14144/LG8.GPU 1: | 63.81K/63.74Kh/s | A:192 R: 0 HW:58 WU:13.8/m I:18
No idea what to try more. Ive been googling any trying like 50 different etting for last 4 days. Any tips?
People are reporting like 70-80% of scrypt range. I cant go above 10%.
Also tips for 7870 (R270x) will be great, Im on 90KH/s with those.
March 08, 2014, 11:38:39 AM
Hi to all!
I have some questions about mining of this coins.
I have r9 280x video cards. On scrypt i have 750 kh\s and it's okay.
1) On UltraCoins i have 150 kh\s on each card. It is normal hash rate for this coin? Plz write how many mh\s you have on which card?
I testing it on 4 pools.
http://ultra.nitro.org/
http://utcpool.com/
http://ultra.minepools.us/
and
http://ultra.coinsnipers.com/
But the problem, than on Dashboard pools i have much smaller numbers.
http://ultra.nitro.org/ - 62 Kh\s
http://utcpool.com/ - 40 Kh\s
http://ultra.minepools.us/ - 53 Kh\s
http://ultra.coinsnipers.com/ - 49 Kh\s
Is this normal?
My cgminer-3.7.2-sj-0.02 settings are:
Thank you
I have some questions about mining of this coins.
I have r9 280x video cards. On scrypt i have 750 kh\s and it's okay.
1) On UltraCoins i have 150 kh\s on each card. It is normal hash rate for this coin? Plz write how many mh\s you have on which card?
I testing it on 4 pools.
http://ultra.nitro.org/
http://utcpool.com/
http://ultra.minepools.us/
and
http://ultra.coinsnipers.com/
But the problem, than on Dashboard pools i have much smaller numbers.
http://ultra.nitro.org/ - 62 Kh\s
http://utcpool.com/ - 40 Kh\s
http://ultra.minepools.us/ - 53 Kh\s
http://ultra.coinsnipers.com/ - 49 Kh\s
Is this normal?
My cgminer-3.7.2-sj-0.02 settings are:
Code:
"load-balance" : true,
"api-listen":true,
"gpu-memclock" : "1500",
"gpu-engine" : "1020",
"thread-concurrency" : "16384",
"intensity" : "12",
"shaders" : "2048",
"worksize" : "256",
"lookup-gap" : "2",
"gpu-fan" : "10-100,10-100",
"gpu-powertune" : "10",
"temp-cutoff" : "85",
"temp-overheat" : "80",
"temp-target" : "75",
"gpu-threads" : "2",
"scrypt-jane" : true,
"auto-fan" : true,
"failover-only" : true,
"sj-time" : "1388361600",
"sj-nfmin" : "4",
"sj-nfmax" : "30",
"queue" : "0"
"api-listen":true,
"gpu-memclock" : "1500",
"gpu-engine" : "1020",
"thread-concurrency" : "16384",
"intensity" : "12",
"shaders" : "2048",
"worksize" : "256",
"lookup-gap" : "2",
"gpu-fan" : "10-100,10-100",
"gpu-powertune" : "10",
"temp-cutoff" : "85",
"temp-overheat" : "80",
"temp-target" : "75",
"gpu-threads" : "2",
"scrypt-jane" : true,
"auto-fan" : true,
"failover-only" : true,
"sj-time" : "1388361600",
"sj-nfmin" : "4",
"sj-nfmax" : "30",
"queue" : "0"
Thank you
I've changed your code above, put that in. You're almost certainly getting HW errors if you look at your miner.
I changed thread-concurrency to 16384 and intensity to 12
Now HW is 0, Kh\s 130. But 130 on the pool too.
Thank you. 130 is the norm-high hash rate for r9 280x?
Yes, you can up your clock speed to 1050 - 1100 and get between 135 - 140 fairly safely. I've yet to have a card not work at 1050 on scrypt-jane. Your hashrate is where it is supposed to be now for the settings you have, though.
March 08, 2014, 11:37:29 AM
Hi to all!
I have some questions about mining of this coins.
I have r9 280x video cards. On scrypt i have 750 kh\s and it's okay.
1) On UltraCoins i have 150 kh\s on each card. It is normal hash rate for this coin? Plz write how many mh\s you have on which card?
I testing it on 4 pools.
http://ultra.nitro.org/
http://utcpool.com/
http://ultra.minepools.us/
and
http://ultra.coinsnipers.com/
But the problem, than on Dashboard pools i have much smaller numbers.
http://ultra.nitro.org/ - 62 Kh\s
http://utcpool.com/ - 40 Kh\s
http://ultra.minepools.us/ - 53 Kh\s
http://ultra.coinsnipers.com/ - 49 Kh\s
Is this normal?
My cgminer-3.7.2-sj-0.02 settings are:
Thank you
I have some questions about mining of this coins.
I have r9 280x video cards. On scrypt i have 750 kh\s and it's okay.
1) On UltraCoins i have 150 kh\s on each card. It is normal hash rate for this coin? Plz write how many mh\s you have on which card?
I testing it on 4 pools.
http://ultra.nitro.org/
http://utcpool.com/
http://ultra.minepools.us/
and
http://ultra.coinsnipers.com/
But the problem, than on Dashboard pools i have much smaller numbers.
http://ultra.nitro.org/ - 62 Kh\s
http://utcpool.com/ - 40 Kh\s
http://ultra.minepools.us/ - 53 Kh\s
http://ultra.coinsnipers.com/ - 49 Kh\s
Is this normal?
My cgminer-3.7.2-sj-0.02 settings are:
Code:
"load-balance" : true,
"api-listen":true,
"gpu-memclock" : "1500",
"gpu-engine" : "1020",
"thread-concurrency" : "16384",
"intensity" : "12",
"shaders" : "2048",
"worksize" : "256",
"lookup-gap" : "2",
"gpu-fan" : "10-100,10-100",
"gpu-powertune" : "10",
"temp-cutoff" : "85",
"temp-overheat" : "80",
"temp-target" : "75",
"gpu-threads" : "2",
"scrypt-jane" : true,
"auto-fan" : true,
"failover-only" : true,
"sj-time" : "1388361600",
"sj-nfmin" : "4",
"sj-nfmax" : "30",
"queue" : "0"
"api-listen":true,
"gpu-memclock" : "1500",
"gpu-engine" : "1020",
"thread-concurrency" : "16384",
"intensity" : "12",
"shaders" : "2048",
"worksize" : "256",
"lookup-gap" : "2",
"gpu-fan" : "10-100,10-100",
"gpu-powertune" : "10",
"temp-cutoff" : "85",
"temp-overheat" : "80",
"temp-target" : "75",
"gpu-threads" : "2",
"scrypt-jane" : true,
"auto-fan" : true,
"failover-only" : true,
"sj-time" : "1388361600",
"sj-nfmin" : "4",
"sj-nfmax" : "30",
"queue" : "0"
Thank you
I've changed your code above, put that in. You're almost certainly getting HW errors if you look at your miner.
I changed thread-concurrency to 16384 and intensity to 12
Now HW is 0, Kh\s 130. But 130 on the pool too.
Thank you. 130 is the norm-high hash rate for r9 280x?
March 08, 2014, 11:36:21 AM
Somebody have omptimal cmos settings with r9 290 sapphire cards.
When i get smos running jane-scrypt i only get 50.00hash per card. If i tweek it's 40.00 or even 30.00.
The fact it's such i round number thinks it's not only a gpu setting but also like a maximum or something.
Hope somebody can help me.
When i get smos running jane-scrypt i only get 50.00hash per card. If i tweek it's 40.00 or even 30.00.
The fact it's such i round number thinks it's not only a gpu setting but also like a maximum or something.
Hope somebody can help me.
Seems unlikely you need to change any of your bios settings. I feel like we've tried to help you before. what happen with the last settings we gave you? What are you using right now?
March 08, 2014, 11:33:54 AM
Somebody have omptimal cmos settings with r9 290 sapphire cards.
When i get smos running jane-scrypt i only get 50.00hash per card. If i tweek it's 40.00 or even 30.00.
The fact it's such i round number thinks it's not only a gpu setting but also like a maximum or something.
Hope somebody can help me.
When i get smos running jane-scrypt i only get 50.00hash per card. If i tweek it's 40.00 or even 30.00.
The fact it's such i round number thinks it's not only a gpu setting but also like a maximum or something.
Hope somebody can help me.
March 08, 2014, 11:22:00 AM
i love this coin, if it were a girl, i'd take it to dinner. bought at 22 20 & 18. sold at 25 & 28... getting back in now... maybe i'll wait. idk. 
And guys, you can't play the technicals like the stocks and forex, crypto is its own beast and has it's own technicals.
And guys, you can't play the technicals like the stocks and forex, crypto is its own beast and has it's own technicals.
March 08, 2014, 10:55:25 AM
Hi to all!
I have some questions about mining of this coins.
I have r9 280x video cards. On scrypt i have 750 kh\s and it's okay.
1) On UltraCoins i have 150 kh\s on each card. It is normal hash rate for this coin? Plz write how many mh\s you have on which card?
I testing it on 4 pools.
http://ultra.nitro.org/
http://utcpool.com/
http://ultra.minepools.us/
and
http://ultra.coinsnipers.com/
But the problem, than on Dashboard pools i have much smaller numbers.
http://ultra.nitro.org/ - 62 Kh\s
http://utcpool.com/ - 40 Kh\s
http://ultra.minepools.us/ - 53 Kh\s
http://ultra.coinsnipers.com/ - 49 Kh\s
Is this normal?
My cgminer-3.7.2-sj-0.02 settings are:
Thank you
I have some questions about mining of this coins.
I have r9 280x video cards. On scrypt i have 750 kh\s and it's okay.
1) On UltraCoins i have 150 kh\s on each card. It is normal hash rate for this coin? Plz write how many mh\s you have on which card?
I testing it on 4 pools.
http://ultra.nitro.org/
http://utcpool.com/
http://ultra.minepools.us/
and
http://ultra.coinsnipers.com/
But the problem, than on Dashboard pools i have much smaller numbers.
http://ultra.nitro.org/ - 62 Kh\s
http://utcpool.com/ - 40 Kh\s
http://ultra.minepools.us/ - 53 Kh\s
http://ultra.coinsnipers.com/ - 49 Kh\s
Is this normal?
My cgminer-3.7.2-sj-0.02 settings are:
Code:
"load-balance" : true,
"api-listen":true,
"gpu-memclock" : "1500",
"gpu-engine" : "1020",
"thread-concurrency" : "8192",
"intensity" : "15",
"shaders" : "2048",
"worksize" : "256",
"lookup-gap" : "2",
"gpu-fan" : "10-100,10-100",
"gpu-powertune" : "10",
"temp-cutoff" : "85",
"temp-overheat" : "80",
"temp-target" : "75",
"gpu-threads" : "2",
"scrypt-jane" : true,
"auto-fan" : true,
"failover-only" : true,
"sj-time" : "1388361600",
"sj-nfmin" : "4",
"sj-nfmax" : "30",
"queue" : "0"
"api-listen":true,
"gpu-memclock" : "1500",
"gpu-engine" : "1020",
"thread-concurrency" : "8192",
"intensity" : "15",
"shaders" : "2048",
"worksize" : "256",
"lookup-gap" : "2",
"gpu-fan" : "10-100,10-100",
"gpu-powertune" : "10",
"temp-cutoff" : "85",
"temp-overheat" : "80",
"temp-target" : "75",
"gpu-threads" : "2",
"scrypt-jane" : true,
"auto-fan" : true,
"failover-only" : true,
"sj-time" : "1388361600",
"sj-nfmin" : "4",
"sj-nfmax" : "30",
"queue" : "0"
Thank you
You squeezed out some more than I do on these 280X cards:
Using these settings: http://www.reddit.com/r/official_utc/comments/1z93t9/cgminer_configs_for_new_nfactor/cfxh4tl
March 08, 2014, 10:45:34 AM
Hi to all!
I have some questions about mining of this coins.
I have r9 280x video cards. On scrypt i have 750 kh\s and it's okay.
1) On UltraCoins i have 150 kh\s on each card. It is normal hash rate for this coin? Plz write how many mh\s you have on which card?
I testing it on 4 pools.
http://ultra.nitro.org/
http://utcpool.com/
http://ultra.minepools.us/
and
http://ultra.coinsnipers.com/
But the problem, than on Dashboard pools i have much smaller numbers.
http://ultra.nitro.org/ - 62 Kh\s
http://utcpool.com/ - 40 Kh\s
http://ultra.minepools.us/ - 53 Kh\s
http://ultra.coinsnipers.com/ - 49 Kh\s
Is this normal?
My cgminer-3.7.2-sj-0.02 settings are:
Thank you
I have some questions about mining of this coins.
I have r9 280x video cards. On scrypt i have 750 kh\s and it's okay.
1) On UltraCoins i have 150 kh\s on each card. It is normal hash rate for this coin? Plz write how many mh\s you have on which card?
I testing it on 4 pools.
http://ultra.nitro.org/
http://utcpool.com/
http://ultra.minepools.us/
and
http://ultra.coinsnipers.com/
But the problem, than on Dashboard pools i have much smaller numbers.
http://ultra.nitro.org/ - 62 Kh\s
http://utcpool.com/ - 40 Kh\s
http://ultra.minepools.us/ - 53 Kh\s
http://ultra.coinsnipers.com/ - 49 Kh\s
Is this normal?
My cgminer-3.7.2-sj-0.02 settings are:
Code:
"load-balance" : true,
"api-listen":true,
"gpu-memclock" : "1500",
"gpu-engine" : "1020",
"thread-concurrency" : "16384",
"intensity" : "12",
"shaders" : "2048",
"worksize" : "256",
"lookup-gap" : "2",
"gpu-fan" : "10-100,10-100",
"gpu-powertune" : "10",
"temp-cutoff" : "85",
"temp-overheat" : "80",
"temp-target" : "75",
"gpu-threads" : "2",
"scrypt-jane" : true,
"auto-fan" : true,
"failover-only" : true,
"sj-time" : "1388361600",
"sj-nfmin" : "4",
"sj-nfmax" : "30",
"queue" : "0"
"api-listen":true,
"gpu-memclock" : "1500",
"gpu-engine" : "1020",
"thread-concurrency" : "16384",
"intensity" : "12",
"shaders" : "2048",
"worksize" : "256",
"lookup-gap" : "2",
"gpu-fan" : "10-100,10-100",
"gpu-powertune" : "10",
"temp-cutoff" : "85",
"temp-overheat" : "80",
"temp-target" : "75",
"gpu-threads" : "2",
"scrypt-jane" : true,
"auto-fan" : true,
"failover-only" : true,
"sj-time" : "1388361600",
"sj-nfmin" : "4",
"sj-nfmax" : "30",
"queue" : "0"
Thank you
I've changed your code above, put that in. You're almost certainly getting HW errors if you look at your miner.
Jump to: