Author

Topic: [ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!! - page 528. (Read 946654 times)

hero member
Activity: 684
Merit: 500
Veni. Vidi. Vici.
Try your GPU engine at 1000, mem at 1250 and make it -g 2, provided you have 8GB ram.

Edit: Nevermind. Just saw that you had 4GB. Try this:

Code:
--scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -I 11 --gpu-engine 1150 --gpu-memclock 1250 -w 256 -g 2 --auto-fan --temp-target 75 --temp-overheat 80 --temp-cutoff 85 --shaders 2048

Yes, leave TC blank but make sure to delete any old bin files previously generate by CGMiner.
newbie
Activity: 52
Merit: 0
Hi all

Could anybody advise why so many HW?

Rig 5*270x

 cgminer version 3.7.2 - Started: [2014-03-01 00:46:06]
--------------------------------------------------------------------------------
 (5s):442.1K (avg):439.4Kh/s | A:157184  R:4784  HW:1470  WU:287.7/m
 ST: 2  SS: 0  NB: 1104  LW: 85196  GF: 0  RF: 0
 Connected to ultra.nitro.org diff 32 with stratum as user ******.3
 Block: 6a6e5723...  Diff:2  Started: [10:10:45]  Best share: 742K
--------------------------------------------------------------------------------
 [P]ool management [G]PU management ettings [D]isplay options [Q]uit
 GPU 0:  50.0C 2429RPM | 87.85K/87.89Kh/s | A:32496 R: 784 HW:301 WU: 58.9/m I:15
 GPU 1:  40.0C 2342RPM | 87.87K/87.93Kh/s | A:30640 R: 880 HW:293 WU: 56.0/m I:15
 GPU 2:  51.0C 2385RPM | 87.91K/87.93Kh/s | A:29456 R:1168 HW:314 WU: 55.2/m I:15
 GPU 3:  47.0C 2420RPM | 87.87K/87.91Kh/s | A:33392 R: 848 HW:284 WU: 60.7/m I:15
 GPU 4:  44.0C 2328RPM | 87.39K/87.81Kh/s | A:31264 R:1104 HW:278 WU: 57.1/m I:15


setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
ultracoinminer --scrypt-jane  -o stratum+tcp://ultra.nitro.org:3337 -u ********.3 -p aercbz!@# --sj-nfmin 4 --sj-nfmax 30  --sj-time 1388361600 -I 15 -s 1 -g 1 -w 256 -v 1 --thread-concurrency 16384 --gpu-engine 1100 --gpu-memclock 1400 --gpu-powertune 20 --gpu-fan 60%

RAM only 4 GB
Thanks

What is WU:287.7/m  ? is it normal 57 in average for 270x?
legendary
Activity: 1638
Merit: 1011
jakiman is back!
I trust CT so I'll trade there again one it comes back.
But until then, UTC price might go below 0.0001 if this continues....
member
Activity: 98
Merit: 10
Sad but i think this coin is dead already  Embarrassed

It's not dead, however in my opinion it cannot survive another 2-3 weeks at these conditions with no news, low prof, low descending price etc etc waiting for CT to be back online, assuming most people will still trust their coins on there.
sr. member
Activity: 448
Merit: 250
Bumface:

We've tried being patient.  We really have.  

But the bottom line is you and Ziggy created the coin and profited from it, and are leaving it to die.  We are one month in.  Early adopters are going down with the ship, and other formerly dedicated investors are fleeing trying to salvage some of their resources.

We need you to step up and get this on a reputable exchange with decent volume.  The coin was too big for Crypto-Trade, and that's before they got hacked.  Waiting for them to come back in 3 weeks doesn't solve anything long term.  No one is going to risk putting big buy support into a small exchange and risked getting Gox'd.

We need to you step up and actually understand mining of your own coin.  At current prices and hash rates, UTC is only slightly more profitable to mine than DOGE, with the UTC chart pointing straight down.  It was once many times more profitable to mine than other coins.  Now, not so much.

We (the community) have got the coin listed on small exchanges without your support.  We (the community) have tried to be patient bagholders, waiting for you to show some ownership and hustle and get this coin moving.

We can't wait forever.  Contrary to what some people are saying, this is real investment for all of us trying to make real money.  Make your move, or tell us once and for all that you're not going to make a move and we'll make a move for you...on to another coin.




Most of what you say is valid criticism, which some of us have tried to submit since long ago to no avail, because there's always people defending the status quo no matter what.
I do agree particularly on the perilous situation UTC is in at the moment, with low trading volume, low profitability, lack of a proper exchange, and N-factor shifts muddling the water for miners.

I stand by the request for bumface to share some of the super-top-secret details he was always hinting about, with us early adopters.
It is true some holders are selling, some already left completely like imginy, and some are starting to have doubts about the whole thing.

It's easy for bumface to be confident because he already made some money, which he already re-invested in unrelated activities, not so much for us peons who gotta pay bills.

So, no more "brave-heart" fluff speeches, just clarity, honesty, communal trust.

It's all we've ever asked, after all.


And no, jumping at one's throat screaming "troll" over and over again is not helping the coin either, so please avoid that.



Also, feel free to delete the post if you feel is necessary.


+1
full member
Activity: 224
Merit: 100
warning: mintpal is ridiculously manipulated. watching these orders is making me laugh.  Grin

What, because its going down -> manipulation?

I dont mind my UTC value dropping because I love that the people who bought the premine are down even worse than me. Its an awesome thought.



Hate to be the bearer of bad news, but they are still able to sell at 400% profit against what they paid for it.  
member
Activity: 98
Merit: 10
warning: mintpal is ridiculously manipulated. watching these orders is making me laugh.  Grin

What, because its going down -> manipulation?

I dont mind my UTC value dropping because I love that the people who bought the premine are down even worse than me. Its an awesome thought.



It is manipulated, it dropped from 0.00019 to 0.00015 in a couple minutes INSTANTLY, check the sell times.
Probably the same person was selling and buying (with a bot?).
sr. member
Activity: 406
Merit: 250
 Sad but i think this coin is dead already  Embarrassed
legendary
Activity: 896
Merit: 1000
warning: mintpal is ridiculously manipulated. watching these orders is making me laugh.  Grin

What, because its going down -> manipulation?

I dont mind my UTC value dropping because I love that the people who bought the premine are down even worse than me. Its an awesome thought.

member
Activity: 98
Merit: 10
Bumface:

We've tried being patient.  We really have.  

But the bottom line is you and Ziggy created the coin and profited from it, and are leaving it to die.  We are one month in.  Early adopters are going down with the ship, and other formerly dedicated investors are fleeing trying to salvage some of their resources.

We need you to step up and get this on a reputable exchange with decent volume.  The coin was too big for Crypto-Trade, and that's before they got hacked.  Waiting for them to come back in 3 weeks doesn't solve anything long term.  No one is going to risk putting big buy support into a small exchange and risked getting Gox'd.

We need to you step up and actually understand mining of your own coin.  At current prices and hash rates, UTC is only slightly more profitable to mine than DOGE, with the UTC chart pointing straight down.  It was once many times more profitable to mine than other coins.  Now, not so much.

We (the community) have got the coin listed on small exchanges without your support.  We (the community) have tried to be patient bagholders, waiting for you to show some ownership and hustle and get this coin moving.

We can't wait forever.  Contrary to what some people are saying, this is real investment for all of us trying to make real money.  Make your move, or tell us once and for all that you're not going to make a move and we'll make a move for you...on to another coin.




Most of what you say is valid criticism, which some of us have tried to submit since long ago to no avail, because there's always people defending the status quo no matter what.
I do agree particularly on the perilous situation UTC is in at the moment, with low trading volume, low profitability, lack of a proper exchange, and N-factor shifts muddling the water for miners.

I stand by the request for bumface to share some of the super-top-secret details he was always hinting about, with us early adopters.
It is true some holders are selling, some already left completely like imginy, and some are starting to have doubts about the whole thing.

It's easy for bumface to be confident because he already made some money, which he already re-invested in unrelated activities, not so much for us peons who gotta pay bills.

So, no more "brave-heart" fluff speeches, just clarity, honesty, communal trust.

It's all we've ever asked, after all.


And no, jumping at one's throat screaming "troll" over and over again is not helping the coin either, so please avoid that.



Also, feel free to delete the post if you feel is necessary.

hero member
Activity: 938
Merit: 1000
@halofirebtc
warning: mintpal is ridiculously manipulated. watching these orders is making me laugh.  Grin
hero member
Activity: 684
Merit: 500
Veni. Vidi. Vici.
anyone with 4 280x cards and 4gbs of ram mining?

My rig will only work properly with 3 cards now.

since the Nfactor change, on my 4 card right, I get
"Enqueueing kernel onto command queue" with 1 of my 4 cards now.

regardless of how I change around he miner settings.

This worked for me on my 4GB rigs:

Code:
--scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -I 11 --gpu-engine 1150 --gpu-memclock 1250 -w 256 -g 2 --auto-fan --temp-target 75 --temp-overheat 80 --temp-cutoff 85 --shaders 2048

I have Sapphire's, Powercolor's, Gigabytes, and ASUS cards. All took to that fine.

If you can bump it up to 8GB:

Code:
--scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -I 12 --gpu-engine 1000 --gpu-memclock 1250 -w 256 -g 2 --auto-fan --temp-target 75 --temp-overheat 80 --temp-cutoff 85 --thread-concurrency 16384

You can also try adding this to the end of your config:

Code:
--lookup-gap 3    or    --lookup-gap 4
full member
Activity: 207
Merit: 100
anyone with 4 280x cards and 4gbs of ram mining?

My rig will only work properly with 3 cards now.

since the Nfactor change, on my 4 card right, I get
"Enqueueing kernel onto command queue" with 1 of my 4 cards now.

regardless of how I change around he miner settings.
hero member
Activity: 684
Merit: 500
Veni. Vidi. Vici.
Excellent. Let's keep the support strong and community active. These are rough times but if we can overcome this obstacle, any in the future will seem like a cake walk.

Bumface, if you have any updates on your work, please chime in. The reddit thread is great and all but its a bit redundant and unfortunately, not entirely accurate--with respect to the profitability that is because the 1000KHs you mention is misleading. At the current NFACTOR, 1000KHs Scrypt-Jane is equivalent to approx 5600KHs Scrypt. My 17,000 KHs Scrypt is now around 3000KHs Scrypt-Jane due to the new NFACTOR. That's a ratio of 5.67 to 1. With that in mind, a regular 1000 KHs Scrypt would equate to approx 176 KHs Scrypt-Jane, again at the current NFACTOR. With that in mind, you're netting approx $9.50 per day at the current rates, difficulty, etc.

These types of misleading arguments cannot be presented because that will only lead to one thing: disappointment. And that is not the first impression you want to give, especially because it will be a lasting one.

So, let's straighten things up, articulate the facts, and get this baby moving.
sr. member
Activity: 448
Merit: 250
Sure thing @idol.

Also, to invite all your Facebook friends at once, just do this: http://www.techgator.org/how-to-invite-all-friends-to-a-facebook-eventpage/

It works. And even if only a few respond, so be it. Every little bit helps!

UTC Facebook
yes i will do that i have 300 likes on my page i hope it helps

does utc have face book page?


Yes.

https://www.facebook.com/ultracoinnet

done!!
hero member
Activity: 684
Merit: 500
Veni. Vidi. Vici.
Sure thing @idol.

Also, to invite all your Facebook friends at once, just do this: http://www.techgator.org/how-to-invite-all-friends-to-a-facebook-eventpage/

It works. And even if only a few respond, so be it. Every little bit helps!

UTC Facebook
yes i will do that i have 300 likes on my page i hope it helps

does utc have face book page?


Yes.

https://www.facebook.com/ultracoinnet
sr. member
Activity: 448
Merit: 250
Sure thing @idol.

Also, to invite all your Facebook friends at once, just do this: http://www.techgator.org/how-to-invite-all-friends-to-a-facebook-eventpage/

It works. And even if only a few respond, so be it. Every little bit helps!

UTC Facebook
yes i will do that i have 300 likes on my page i hope it helps


hero member
Activity: 684
Merit: 500
Veni. Vidi. Vici.
Sure thing @idol.

Also, to invite all your Facebook friends at once, just do this: http://www.techgator.org/how-to-invite-all-friends-to-a-facebook-eventpage/

It works. And even if only a few respond, so be it. Every little bit helps!

UTC Facebook
newbie
Activity: 55
Merit: 0
Just bought some cheap Ultracoin.
Bought and installed some more RAM in my rig.
Tweaking my miner for today's curveball.
Reading doom and gloom from people who are investing with money they cannot afford to lose.

Am I the only one having fun with this?

Stop being a bunch of sissies and do the Ultracoin Nshuffle.  There will be another chart.
newbie
Activity: 47
Merit: 0
OMG this this drops like poop.... under 200 santosh now.
Jump to: