[ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!! - page 699.

Freyja

member

Activity: 66

Merit: 10

Quote from: RandyMagnum on February 08, 2014, 12:49:47 AM

I'm not in town to measure this myself, has anyone measured power savings at the wall for mining this versus scrypt with similar configs?

Didn't really measure persay (spell like that? xD) but my electricity bill lowered by 20% in total so I'm happy. Grin

RandyMagnum

sr. member

Activity: 662

Merit: 250

I'm not in town to measure this myself, has anyone measured power savings at the wall for mining this versus scrypt with similar configs?

sylycw

newbie

Activity: 21

Merit: 0

help!

why my wallet is always out of sync,is it need .conf?

help,thank you very much.

dooman13

newbie

Activity: 56

Merit: 0

anyone mining with a 6950 or 5870? if so, whats your scrypt-jane hash rate?
ive got: 6950=235kh and 5870=255kh. roughly half of scrypt rate. possibly, i could get more?

weblog

newbie

Activity: 47

Merit: 0

Quote from: nanoprobe on February 07, 2014, 07:58:30 PM

My Minepools dashboard is down but my miners are still humming along. Wonder what happened? Huh

Same for me !!
Time to switch pool

Brilliantrocket

hero member

Activity: 826

Merit: 500

When I try to run the UltraCoin miner, it opens and then nothing happens. Any idea as to whats wrong? When I try to connect through the console, nothing happens after I enter my info. It just freezes.

laterbreh

member

Activity: 84

Merit: 10

Quote from: Jarod1231 on February 07, 2014, 11:19:57 PM

Quote from: nanoprobe on February 07, 2014, 11:10:40 PM

Quote from: laterbreh on February 07, 2014, 09:56:45 PM

https://sites.google.com/site/rmdavidson/

Scroll to the bottom to get the patched CGMiner

Make sure that you put --scrypt-jane in the config

Thanks

ultra.leetpools isnt working for me now either... this is ridiculous how the pools keep going down..... Oh well, set failover for both pools... if both go down it'll switch to solo mining for me

We implemented CloudFlare DDOS protection, since we are routing our traffic through them, there might be a chance that youre stuck on our old DNS. Just go ahead and flush your DNS and give us a try. We are up with 600Mhs!

MasterCATZ

full member

Activity: 426

Merit: 100

Quote from: skribnod on February 07, 2014, 10:54:35 PM

I just seen on Leetpools website that catalyst 14.1 doesn't work for jane scrypt, how do i tell if that is what i am running? The miner starts up and searches for, acknowledges difficulty level, then goes bad from there. I did everything right and I do mine most other coins with o problem using cgminer but scrypt jane is new to me. Didn't figure that it would bethis difficult.

Thanks

can verify this , I just installed 14 today , and nothing but HW errors on R9 290 , back to scrypt mining for multimedia rig

only reason I am sticking with 14 atm is no tearing during media playback + can mine something at same time

normally I remove ati drivers and go back to mesa on weekends to watch media

Jarod1231

sr. member

Activity: 951

Merit: 252

Quote from: nanoprobe on February 07, 2014, 11:10:40 PM

Quote from: laterbreh on February 07, 2014, 09:56:45 PM

https://sites.google.com/site/rmdavidson/

Scroll to the bottom to get the patched CGMiner

Make sure that you put --scrypt-jane in the config

Thanks

ultra.leetpools isnt working for me now either... this is ridiculous how the pools keep going down..... Oh well, set failover for both pools... if both go down it'll switch to solo mining for me

nanoprobe

legendary

Activity: 980

Merit: 1000

Traveling in subspace

Quote from: laterbreh on February 07, 2014, 09:56:45 PM

https://sites.google.com/site/rmdavidson/

Scroll to the bottom to get the patched CGMiner

Make sure that you put --scrypt-jane in the config

Thanks

skribnod

member

Activity: 95

Merit: 10

This is my miner setup:

ultracoinminer -o ultra.leetpools.com:3333 -u skribnod.1 -p x --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --thread-concurrency 8192 -g 2 -I 13 -w 256 --temp-cutoff 90 --temp-overheat 85 --gpu-powertune 20 --expiry 1 --queue 0 --no-submit-stale

Still gives me the stratum fail and "Null"

Thanks

nanoprobe

legendary

Activity: 980

Merit: 1000

Traveling in subspace

Quote from: skribnod on February 07, 2014, 10:27:59 PM

Nope, i replaced user name with my miners name and password has been replaced also. When i took out "stratum....//" i recieve the same error. I am using "leetpool" for a mining pool. Any other ideas?

Thanks

Your username needs to be your login username and your miner name. It should read -u loginname.minername -p your password

skribnod

member

Activity: 95

Merit: 10

I just seen on Leetpools website that catalyst 14.1 doesn't work for jane scrypt, how do i tell if that is what i am running? The miner starts up and searches for, acknowledges difficulty level, then goes bad from there. I did everything right and I do mine most other coins with o problem using cgminer but scrypt jane is new to me. Didn't figure that it would bethis difficult.

Thanks

jakiman

legendary

Activity: 1638

Merit: 1011

jakiman is back!

Quote from: skribnod on February 07, 2014, 10:08:05 PM

Could someone help me with a problem? I am running the miner form the front page and have two 280x cards. My bat file is:

ultracoinminer -o stratum+tcp://ultra.leetpools.com:3333 -u user.1 -p x --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --thread-concurrency 8192 -g 2 -I 13 -w 256 --temp-cutoff 90 --temp-overheat 85 --gpu-powertune 20 --gpu-threads 2 --expiry 1 --queue 0 --no-submit-stale

I input my miner and password but it is giving me this :

Pool 0 JSON Stratum Auth failed: (null)

Did you create the worker called "1" in the pool? If not, create it with x as the password.
That error usually happens when your worker's -u and -p is wrong. (or if it doesn't even exist!)

laterbreh

member

Activity: 84

Merit: 10

Make sure that your user names is configured right on the my workers page

If your username is username

in the my workers page add a 1, then password X

so in your config you would have -u username.1 -p x

Protagonus

full member

Activity: 238

Merit: 100

Quote from: skribnod on February 07, 2014, 10:39:07 PM

Yes i do have the "S" on leetpools, i was wondering how many coins a day is anyone getting on 1000khs?

Thanks and i will try again tomorrow after some sleep.

darn, was hoping it was the S. I missed the s myself with first run Grin

.

1000khz at current difficulty is about 50 coins / day I believe

skribnod

member

Activity: 95

Merit: 10

Yes i do have the "S" on leetpools, i was wondering how many coins a day is anyone getting on 1000khs?

Thanks and i will try again tomorrow after some sleep.

Protagonus

full member

Activity: 238

Merit: 100

Quote from: skribnod on February 07, 2014, 10:27:59 PM

Nope, i replaced user name with my miners name and password has been replaced also. When i took out "stratum....//" i recieve the same error. I am using "leetpool" for a mining pool. Any other ideas?

Thanks

make sure your address in .bat for pool is ultra.leetpools.com:3333

that may be your isssue.....no S.

skribnod

member

Activity: 95

Merit: 10

Nope, i replaced user name with my miners name and password has been replaced also. When i took out "stratum....//" i recieve the same error. I am using "leetpool" for a mining pool. Any other ideas?

Thanks

waltsmith

full member

Activity: 196

Merit: 100

Quote from: Jarod1231 on February 07, 2014, 10:13:44 PM

Quote from: skribnod on February 07, 2014, 10:08:05 PM

Could someone help me with a problem? I am running the miner form the front page and have two 280x cards. My bat file is:

ultracoinminer -o stratum+tcp://ultra.leetpools.com:3333 -u user.1 -p x --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --thread-concurrency 8192 -g 2 -I 13 -w 256 --temp-cutoff 90 --temp-overheat 85 --gpu-powertune 20 --gpu-threads 2 --expiry 1 --queue 0 --no-submit-stale

I input my miner and password but it is giving me this :

Pool 0 JSON Stratum Auth failed: (null)

Any help would be appreciated.

Thanks

Remove "stratum+tcp://"

also remove the (--gpu-threads 2) reference. you already took care of it with (-g 2)

waltsmith

Topic: [ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!! - page 699. (Read 946654 times)