[ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!! - page 695.

vizique

legendary

Activity: 2435

Merit: 1642

Quote from: sakr on February 08, 2014, 03:32:32 PM

Quote from: scottycam on February 08, 2014, 03:28:49 PM

Quote from: tanalith on February 08, 2014, 03:24:11 PM

Quote from: scottycam on February 08, 2014, 03:18:51 PM

Quote from: waltsmith on February 08, 2014, 11:49:52 AM

Quote from: scottycam on February 08, 2014, 10:31:44 AM

Anyone have a solution?

at the Diff it is at now try getting rid of the Expiry queue scantime stuff and deal with a few percent rejects...you arent giving your worker time to complete any work at this diff...

waltsmith

Thanks for the info. I removed all that bit and still not getting any WU. Anyone have any ideas?

you're getting a lot of hardware errors, change the config

I know I'm getting H/W errors, I posted my config earlier. How should I change the config? I've tried a few things and its not making a difference.

HW errors usually caused by voltage issues, try disabling any voltage tweaks in catalyst, then run the cards with stock settings, and go from there.

And make sure you delete the .bin files in the ultracoin-miner folder

sakr

sr. member

Activity: 364

Merit: 250

Quote from: scottycam on February 08, 2014, 03:28:49 PM

Quote from: tanalith on February 08, 2014, 03:24:11 PM

Quote from: scottycam on February 08, 2014, 03:18:51 PM

Quote from: waltsmith on February 08, 2014, 11:49:52 AM

Quote from: scottycam on February 08, 2014, 10:31:44 AM

Anyone have a solution?

at the Diff it is at now try getting rid of the Expiry queue scantime stuff and deal with a few percent rejects...you arent giving your worker time to complete any work at this diff...

waltsmith

Thanks for the info. I removed all that bit and still not getting any WU. Anyone have any ideas?

you're getting a lot of hardware errors, change the config

I know I'm getting H/W errors, I posted my config earlier. How should I change the config? I've tried a few things and its not making a difference.

HW errors usually caused by voltage issues, try disabling any voltage tweaks in catalyst, then run the cards with stock settings, and go from there.

scottycam

newbie

Activity: 15

Merit: 0

Quote from: tanalith on February 08, 2014, 03:24:11 PM

Quote from: scottycam on February 08, 2014, 03:18:51 PM

Quote from: waltsmith on February 08, 2014, 11:49:52 AM

Quote from: scottycam on February 08, 2014, 10:31:44 AM

Anyone have a solution?

at the Diff it is at now try getting rid of the Expiry queue scantime stuff and deal with a few percent rejects...you arent giving your worker time to complete any work at this diff...

waltsmith

Thanks for the info. I removed all that bit and still not getting any WU. Anyone have any ideas?

you're getting a lot of hardware errors, change the config

I know I'm getting H/W errors, I posted my config earlier. How should I change the config? I've tried a few things and its not making a difference.

tanalith

newbie

Activity: 36

Merit: 0

Quote from: scottycam on February 08, 2014, 03:18:51 PM

Quote from: waltsmith on February 08, 2014, 11:49:52 AM

Quote from: scottycam on February 08, 2014, 10:31:44 AM

Anyone have a solution?

at the Diff it is at now try getting rid of the Expiry queue scantime stuff and deal with a few percent rejects...you arent giving your worker time to complete any work at this diff...

waltsmith

Thanks for the info. I removed all that bit and still not getting any WU. Anyone have any ideas?

you're getting a lot of hardware errors, change the config

scottycam

newbie

Activity: 15

Merit: 0

Quote from: waltsmith on February 08, 2014, 11:49:52 AM

Quote from: scottycam on February 08, 2014, 10:31:44 AM

I cant get the miner working with my 2 x Windforce 280x. Running Catalyst 13.11.

Heres my config:

set GPU_MAX_ALLOC_PERCENT 100
set GPU_USE_SYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://utc.greekpool.eu:3337 -u myusername -p mypw --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --expiry 1 --queue 0 --scan-time 1 --intensity 10 --gpu-engine 1050 --worksize 256 -g 2 --thread-concurrency 8192

Its hashing fine but there are no WU produced.

Anyone have a solution?

at the Diff it is at now try getting rid of the Expiry queue scantime stuff and deal with a few percent rejects...you arent giving your worker time to complete any work at this diff...

waltsmith

Thanks for the info. I removed all that bit and still not getting any WU. Anyone have any ideas?

https://i.imgur.com/ApkERI9.jpg

usrbad

newbie

Activity: 13

Merit: 0

Quote from: bumface on February 08, 2014, 02:03:54 PM

NEW mac package http://www.speedyshare.com/rJPzz/Ultracoin-Qt.app.zip

Works fine on my Mavericks! Thanks a lot!

bumface

hero member

Activity: 728

Merit: 501

NEW mac package http://www.speedyshare.com/rJPzz/Ultracoin-Qt.app.zip

laterbreh

member

Activity: 84

Merit: 10

http://ULTRA.leetpools.com

Cloudflare DDOS protection active on our pool. Mine with peace of mind. Enjoy.

FYI, since cloudflare requires re-routing traffic through them, the reason some of you may not be able to access the site is because your DNSs have not been updated. Try flushing and clearing your cache/dns and then give it a try!

Thanks boys!

[/size]

fredeq

legendary

Activity: 1537

Merit: 1005

Quote from: Jarod1231 on February 08, 2014, 12:19:33 PM

Quote from: fredeq on February 08, 2014, 12:15:57 PM

Quote from: nanoprobe on February 08, 2014, 12:09:01 PM

Quote from: fredeq on February 08, 2014, 12:04:29 PM

So whats with leetpools again? I even tried changing DNS server, created new worker... Still no connection!

I was finally able to get my 1 rogue miner connected by changing the domain in the bat file URL from .com to .net My other miners are still using .com with no issues. Go figure! Huh

.net did the thing, thank you very much!

fixed my problem also... weird, they don't list .net as a server anywhere

.com site just died on me and i switched to browsing dashboard on .net Wink

lemfuture

hero member

Activity: 686

Merit: 500

Quote from: wuanyu on February 08, 2014, 12:23:47 PM

Anybody tried? http://utc.coinpl.com

i did

wuanyu

newbie

Activity: 6

Merit: 0

Anybody tried? http://utc.coinpl.com

Jarod1231

sr. member

Activity: 951

Merit: 252

Quote from: fredeq on February 08, 2014, 12:15:57 PM

Quote from: nanoprobe on February 08, 2014, 12:09:01 PM

Quote from: fredeq on February 08, 2014, 12:04:29 PM

So whats with leetpools again? I even tried changing DNS server, created new worker... Still no connection!

I was finally able to get my 1 rogue miner connected by changing the domain in the bat file URL from .com to .net My other miners are still using .com with no issues. Go figure! Huh

.net did the thing, thank you very much!

fixed my problem also... weird, they don't list .net as a server anywhere

fredeq

legendary

Activity: 1537

Merit: 1005

Quote from: nanoprobe on February 08, 2014, 12:09:01 PM

Quote from: fredeq on February 08, 2014, 12:04:29 PM

So whats with leetpools again? I even tried changing DNS server, created new worker... Still no connection!

I was finally able to get my 1 rogue miner connected by changing the domain in the bat file URL from .com to .net My other miners are still using .com with no issues. Go figure! Huh

.net did the thing, thank you very much!

nanoprobe

legendary

Activity: 980

Merit: 1000

Traveling in subspace

Quote from: fredeq on February 08, 2014, 12:04:29 PM

So whats with leetpools again? I even tried changing DNS server, created new worker... Still no connection!

I was finally able to get my 1 rogue miner connected by changing the domain in the bat file URL from .com to .net My other miners are still using .com with no issues. Go figure! Huh

fredeq

legendary

Activity: 1537

Merit: 1005

So whats with leetpools again? I even tried changing DNS server, created new worker... Still no connection!

waltsmith

full member

Activity: 196

Merit: 100

Quote from: scottycam on February 08, 2014, 10:31:44 AM

I cant get the miner working with my 2 x Windforce 280x. Running Catalyst 13.11.

Heres my config:

set GPU_MAX_ALLOC_PERCENT 100
set GPU_USE_SYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://utc.greekpool.eu:3337 -u myusername -p mypw --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --expiry 1 --queue 0 --scan-time 1 --intensity 10 --gpu-engine 1050 --worksize 256 -g 2 --thread-concurrency 8192

Its hashing fine but there are no WU produced.

Anyone have a solution?

at the Diff it is at now try getting rid of the Expiry queue scantime stuff and deal with a few percent rejects...you arent giving your worker time to complete any work at this diff...

waltsmith

mudshark79

newbie

Activity: 56

Merit: 0

Quote from: imginy on February 08, 2014, 11:12:17 AM

Quote from: JCviggen on February 08, 2014, 11:08:48 AM

Quote from: mudshark79 on February 08, 2014, 09:54:29 AM

Quote from: JCviggen on February 08, 2014, 09:50:25 AM

I had to add a 4th failover pool, all 3 were dead. FFS.

Try

http://utc.idcray.com

it is online since beginning (maybe even first online pool at start) and no downtimes whatsoever, there were some complaints about e-mail confimation process for changing payout adress but this was mostly RTFM-issue IMHO

@OP why this pool isn't listed at page 1? Huh

Mining fine, but confirmation email is not arriving. Not in my spam either.

I went through same issue.

I believe the website is broken and you can fix it by reset your pin.

Quote from: JCviggen on February 08, 2014, 11:08:48 AM

Quote from: mudshark79 on February 08, 2014, 09:54:29 AM

Quote from: JCviggen on February 08, 2014, 09:50:25 AM

I had to add a 4th failover pool, all 3 were dead. FFS.

Try

http://utc.idcray.com

it is online since beginning (maybe even first online pool at start) and no downtimes whatsoever, there were some complaints about e-mail confimation process for changing payout adress but this was mostly RTFM-issue IMHO

@OP why this pool isn't listed at page 1? Huh

Mining fine, but confirmation email is not arriving. Not in my spam either.

I did a test walkthrough with a fresh account -> new account -> sign in -> edit Account details -> email arrived (warning at he website one has to edit the confirmation URL seems to be obsolete) -> can edit Details -> done

Maybe you can contact the pool OP?

EDIT: gave them a hint.

waltsmith

full member

Activity: 196

Merit: 100

Quote from: nanoprobe on February 08, 2014, 10:47:19 AM

Quote from: fredeq on February 08, 2014, 04:52:51 AM

So whats with leetpools? Still cannot connect.

I have 1 miner that refuses to connect to leetpools. I can put another pool url (minepools) in the bat file and it connects to the other pool just fine. I took another bat file from an identical miner that connects and put it into the one that won't. Still won't connect. Rebooted, flushed DNS, still won't connect. Just times out. I'm at a loss on this one. Anyone have any suggestions?

Try deleting your worker at the pool. Then re-adding it a minute later.

waltsmith

imginy

member

Activity: 224

Merit: 10

How do I turn on POS mode?

wouldn't mind seeing how much I make.

imginy

member

Activity: 224

Merit: 10

Quote from: JCviggen on February 08, 2014, 11:08:48 AM

Quote from: mudshark79 on February 08, 2014, 09:54:29 AM

Quote from: JCviggen on February 08, 2014, 09:50:25 AM

I had to add a 4th failover pool, all 3 were dead. FFS.

Try

http://utc.idcray.com

it is online since beginning (maybe even first online pool at start) and no downtimes whatsoever, there were some complaints about e-mail confimation process for changing payout adress but this was mostly RTFM-issue IMHO

@OP why this pool isn't listed at page 1? Huh

Mining fine, but confirmation email is not arriving. Not in my spam either.

I went through same issue.

I believe the website is broken and you can fix it by reset your pin.

Topic: [ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!! - page 695. (Read 946654 times)