[ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!! - page 718.

wing_hk

full member

Activity: 182

Merit: 100

Quote from: podizzle on February 05, 2014, 11:46:45 PM

Quote from: Eddy Wally on February 05, 2014, 11:41:11 PM

Quote from: podizzle on February 05, 2014, 11:33:44 PM

any reputable member want to sell 10k for 115LTC / 3BTC? PM me

haha your that guy from silkroad/sheepmarket. Wink

actually i already got fucking scammed trying to buy ultracoin on freshco.in .. i was the victim of a "hack" where 25 of my LTC was taken out of the wallet after the site shut down. real professional.

openex.pw has been hacked before. I can hardly trust any exchange using the same framework.

I usually withdraw all balance after trading on exchanges with unprofessional looking.

podizzle

hero member

Activity: 535

Merit: 500

Quote from: Eddy Wally on February 05, 2014, 11:41:11 PM

Quote from: podizzle on February 05, 2014, 11:33:44 PM

any reputable member want to sell 10k for 115LTC / 3BTC? PM me

haha your that guy from silkroad/sheepmarket. Wink

actually i already got fucking scammed trying to buy ultracoin on freshco.in .. i was the victim of a "hack" where 25 of my LTC was taken out of the wallet after the site shut down. real professional.

Eddy Wally

newbie

Activity: 28

Merit: 0

Quote from: podizzle on February 05, 2014, 11:33:44 PM

any reputable member want to sell 10k for 115LTC / 3BTC? PM me

haha your that guy from silkroad/sheepmarket. Wink

wing_hk

full member

Activity: 182

Merit: 100

Quote from: jakiman on February 05, 2014, 11:14:07 PM

I would like to know exactly what time UTC will be enabled for trading at crypto-trade.
It's been Feb 6th for over 15 hours here in Australia. So when is this Feb 6th exactly?

They just say in tweeter they will notify 3 hr before adding UTC.

I found they are based in Hong Kong but running US timezone friendly business Tongue

podizzle

hero member

Activity: 535

Merit: 500

any reputable member want to sell 10k for 115LTC / 3BTC? PM me

jakiman

legendary

Activity: 1638

Merit: 1011

jakiman is back!

I would like to know exactly what time UTC will be enabled for trading at crypto-trade.
It's been Feb 6th for over 15 hours here in Australia. So when is this Feb 6th exactly?

tabnk

full member

Activity: 140

Merit: 100

It is Feb 6. Exchange should be adding, any moment now

.

degenorate

full member

Activity: 122

Merit: 100

JOIN NOW!!!

Ultra Coin Pool, 0% fee Pool!!!!! Finding blocks now. ultra.minepools.us , #minepools

Working IRC Bot with pool hash and info!!!!!!

And NO FEES!!!!!

Join Now!

ultra.minepools.us , #minepools

Protagonus

full member

Activity: 238

Merit: 100

Quote from: RandyMagnum on February 05, 2014, 10:38:34 PM

Thanks guys, dropped down to -I 17 on everything, will check back on them in a bit, so far, so good. I do undervolt, but it's looking like the intensity might be the simple culprit for the moment. Thanks again!

If you have multiple similar GPU in one rig; maybe try setting Intensity different for each GPU. Intensity works a bit different with Jane; usually you don't see a huge change in Khs like normal scrypt. However, WU rates are affected.

If you like try I -13,15,17 in a single rig. To see which gives best WU

Many run with I- 13 and I also found I got the best WU rate.

I believe my Khs was about 50 lower with I-13 vs I-17; but my WU is 60-80 higher. (per each gpu)

RandyMagnum

sr. member

Activity: 662

Merit: 250

Quote from: Toxic2040 on February 05, 2014, 10:23:42 PM

Quote from: RandyMagnum on February 05, 2014, 10:12:29 PM

1st GPU on each of my rigs goes dead with "display driver stopped working" message.

The rest of the cards on each rig continue to hash without issue.

This does not/has not happened while mining anything else in the past year, any insight?

The first few times I ran scrypt-jane I seemed to have that problem..I turned down the intensity to 12 and didnt have that problem anymore. The rigs I have running at 18-20 I turned down to 17 and the same thing. After a few restarts it seemed to go away. On a couple I had to juggle the intensity. (ie. 13,12,13,12,13, 18,17,18,18,18)

YMMV.

Quote from: Protagonus on February 05, 2014, 10:18:23 PM

I assume you undervolt? if they run for a few hours or so and then die (and undervolted); just bump the volts up a bit.

0.005v or so. Should cure a 3-6hr dead issue. maybe 0.010v if they die sooner.

Only other thought, is since it's scrypt-jane I noticed that TOO High of TC can cause random deaths. I ended up with 16384 for 7950's, but most newer series (280-290x) or older 7970-7990; tend to have TC @ 8192.

hope that helps

Thanks guys, dropped down to -I 17 on everything, will check back on them in a bit, so far, so good. I do undervolt, but it's looking like the intensity might be the simple culprit for the moment. Thanks again!

FoBoT

sr. member

Activity: 658

Merit: 250

Quote from: bumface on February 05, 2014, 01:54:09 PM

http://www.reddit.com/r/CryptoCurrency/comments/1x3sg5/ultracoin_subreddit_now_active/

do you plan on having an old school forum or do you intend to use reddit for community interactions?

Toxic2040

legendary

Activity: 1834

Merit: 4197

Quote from: RandyMagnum on February 05, 2014, 10:12:29 PM

1st GPU on each of my rigs goes dead with "display driver stopped working" message.

The rest of the cards on each rig continue to hash without issue.

This does not/has not happened while mining anything else in the past year, any insight?

The first few times I ran scrypt-jane I seemed to have that problem..I turned down the intensity to 12 and didnt have that problem anymore. The rigs I have running at 18-20 I turned down to 17 and the same thing. After a few restarts it seemed to go away. On a couple I had to juggle the intensity. (ie. 13,12,13,12,13, 18,17,18,18,18)

YMMV.

Cryddit

legendary

Activity: 924

Merit: 1132

Quote from: cointradero on February 05, 2014, 06:30:24 PM

Quote from: ?? on ??

so one more question: can I use the remaining power of my graphic card? I did not try yet, but since power consumption is also 25% less, where is the power? Makes no sense that there is power left, I could just start a second instance, but I guess it would crash...?

The algorithm takes less energy to process, but the bandwith available for your given GPU or CPU is maxed out. You can't stuff any more information down the pipeline even if the information isn't as computationally intensive for your processor.

In theory you could run in another thread something like a SHA256 miner, which has high GPU requirements but low bandwidth requirements. That said, this is the age of SHA256 ASICs, so you're unlikely to get anything SHA256 mining on a GPU.

tabnk

full member

Activity: 140

Merit: 100

Nitro is up now !!!

Protagonus

full member

Activity: 238

Merit: 100

Quote from: RandyMagnum on February 05, 2014, 10:12:29 PM

1st GPU on each of my rigs goes dead with "display driver stopped working" message.

The rest of the cards on each rig continue to hash without issue.

This does not/has not happened while mining anything else in the past year, any insight?

I assume you undervolt? if they run for a few hours or so and then die (and undervolted); just bump the volts up a bit.

0.005v or so. Should cure a 3-6hr dead issue. maybe 0.010v if they die sooner.

Only other thought, is since it's scrypt-jane I noticed that TOO High of TC can cause random deaths. I ended up with 16384 for 7950's, but most newer series (280-290x) or older 7970-7990; tend to have TC @ 8192.

hope that helps

tabnk

full member

Activity: 140

Merit: 100

Richer is 1 day !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Cool

RandyMagnum

sr. member

Activity: 662

Merit: 250

1st GPU on each of my rigs goes dead with "display driver stopped working" message.

The rest of the cards on each rig continue to hash without issue.

This does not/has not happened while mining anything else in the past year, any insight?

Toxic2040

legendary

Activity: 1834

Merit: 4197

I might not always need a johhny on the spot pool operator but when I do I use ultra.leetpools.net.

imginy

member

Activity: 224

Merit: 10

glad I went with http://utc.idcray.com been very reliable.

tabnk

full member

Activity: 140

Merit: 100

Net Hashrate UPDATED !!!

Quote from: Protagonus on February 05, 2014, 09:43:24 PM

greekpool down also. so took both heh.

Nitro up soon

Leetpools and idcray still up

Topic: [ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!! - page 718. (Read 946654 times)