Author

Topic: [ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!! - page 827. (Read 946656 times)

hero member
Activity: 980
Merit: 500
hang in there guys

You keep me hanging on Wink



Quote
Why don't cha be a man about it and set me free
Now you don't care a thing about me
You're just using me - Hey, abusing me
Get out, get out of my life
And let me sleep at night
'Cos you don't really love me
You just keep me hangin'on
You don't really need me
You just keep me - hangin'on

You da man!!!!!
full member
Activity: 238
Merit: 100
Countdown states  "Countdown ends 02/01/2014 - 20:00:00" which is what it has always been. It ends on 1st Feb at 20:00 UTC



Countdown does not state 20:00 UTC.  It's 20:00 from an unknown timezone, so UTC time is different.  

Currently the timer shows 22:30 Left on the countdown.   A quick search of current UTC time shows Feb. 31  2:30am.

   24hrs in a day (minus) 22:30 = 1:30 (minus) 2:30 =  Negative -1:00.  E.G. the end of the timer occurs on Feb 2. 1:00am UTC time.  

So where does the 20:00 come from?  It means the location programmed into the countdown was -5hrs from UTC time.
Countdown must be centered on east coast US / East canada / NW South America  zone.

Unless, we are all showing different times (relative to UTC) for the counter to end?
member
Activity: 189
Merit: 10
For Eastern Std Time in the US (i.e. New York), launch will be Saturday night at 8pm.

LHM
newbie
Activity: 26
Merit: 0
Countdown states  "Countdown ends 02/01/2014 - 20:00:00" which is what it has always been. It ends on 1st Feb at 20:00 UTC



Your profile shows you at UTC, for the rest of us that are somewhere else we see a different amount of time left before launch.

http://s27.postimg.org/s09m15w6r/2014_01_31_211504.png
newbie
Activity: 36
Merit: 0
Countdown states  "Countdown ends 02/01/2014 - 20:00:00" which is what it has always been. It ends on 1st Feb at 20:00 UTC



Where does it say UTC time? 

Time zone is definitely wrong on countdown unless you live in UTC time zone then. Mine says 22 hours left at this moment in time. So the real question is launch is at 20:00 in what time zone?  I asked bumface directly and his answer was the link to the problem website.

Somebody please provide time zone if they are 100% sure.
hero member
Activity: 560
Merit: 500
Countdown states  "Countdown ends 02/01/2014 - 20:00:00" which is what it has always been. It ends on 1st Feb at 20:00 UTC

newbie
Activity: 26
Merit: 0
Ha, problem solved! This coins going far with us lot behind it! Wink
LHM
newbie
Activity: 26
Merit: 0
It seems the countdown does not have a timezone set, so what it shows is based on local time for whomever is looking at it.


-Side note, I can't believe I've been here for 3 years without posting...
full member
Activity: 364
Merit: 100
Hey everybody what in the world have you been looking at.  The countdown has always remained the same.  We have one day and 2 hours + left.  Ultracoin devs, please be on time for the launch and release pool info in a timely manner.  This would would a terrible way to start off by being late.
sr. member
Activity: 658
Merit: 250
shouldn't it be showing the same time for everyone?  Undecided
it says 24 hours 39 minutes

right now
full member
Activity: 238
Merit: 100
hrmm, I'm showing just under 24hrs.   Which puts the release a bit into Feb. 2 UTC time. 

who knows I guess
newbie
Activity: 26
Merit: 0
hmm doesn't for me.. 18 hours to go.... Im at GMT so was unsure what time zone it was launching in.
full member
Activity: 140
Merit: 100
Countdown now shows another day?
newbie
Activity: 18
Merit: 0
Can someone post some configurations for r9 280x?

Kind regards


730kh/s average on gigabyte r9 280x

,
"intensity" : "13",
"vectors" : "1",
"worksize" : "256",
"kernel" : "scrypt",
"lookup-gap" : "2",
"thread-concurrency" : "819",
"gpu-engine" : "1055",
"gpu-fan" : "60-100",
"gpu-memclock" : "1499",
"gpu-memdiff" : "0",
"gpu-powertune" : "-20,",
"gpu-vddc" : "0.000",
"temp-cutoff" : "90",
"temp-overheat" : "87",
"temp-target" : "78,78,78",
"shaders" : "0,0,0",
"api-mcast-port" : "4028",
"api-port" : "4028",
"auto-fan" : true,
"expiry" : "120",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "2",
"hotplug" : "5",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "30",
"scrypt" : true,
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin",
"device" : "0"
}
sr. member
Activity: 658
Merit: 250
sorry 1 more delay in the pool registration,Devs are working all night to complete it.2 official pools are being installed at the same time.

we apologize for the delay but we want to make sure every thing is 100% right.
2 pools sounds great, thank you and thank the devs for the hard work
full member
Activity: 140
Merit: 100
hero member
Activity: 630
Merit: 500
sorry 1 more delay in the pool registration,Devs are working all night to complete it.2 official pools are being installed at the same time.

we apologize for the delay but we want to make sure every thing is 100% right.

Can we at least know the URL you plan to use for both pools?
full member
Activity: 266
Merit: 100
Can someone post some configurations for r9 280x?

Kind regards
Jump to: