Topic: [ANN] B1tes - New Cryptocurrency - page 2. (Read 11186 times)

Hi everyone,

A new version of B1tes has been launched. It's based on Aeon's rebase to Monero code.

B1tes has been renamed to B1tcash.

Source code: https://github.com/b1tcash/b1t

GUI wallet souce code: https://github.com/b1tcash/b1tcash-gui

Blockchain explorer: http://b1t.cash

Hi,

Please read the information provided in this post: https://bitcointalksearch.org/topic/m.20905435

can you provide all information in more detail?
 

Hi everyone,

The seed nodes for the B1tes blockchain have been updated.

- 138.68.115.86
- 174.138.127.35
- 23.94.223.107

Hi Dev, really happy to see you still active!!
Ready to test

Hi everyone,

By the end of this month, I'm planning to create a command called "notarize" on simplewallet, which will be first released on b1tes TESTNET source code.

The "notarize" command will be used to exclusively to timestamp hashed-data to transactions.

Once it's successfully tested on b1tes TESTNET, it will be released on b1tes CORE source code.

this was launched as an academic coin. Make something that uses this coin.

Hi DEV! no news is not foreseen? can we disperse?

Is the coin still alive, is there an exchange plan?
Is it purely academic?

sorry about thats. Up now!

[2018-01-25 18:37:35] Using JSON-RPC 2.0
[2018-01-25 18:37:35] Starting on stratum+tcp://t1b.bpgmr.com:5555
[2018-01-25 18:37:35] NVML GPU monitoring enabled.
[2018-01-25 18:37:35] NVAPI GPU monitoring enabled.
[2018-01-25 18:37:35] 1 miner thread started, using 'cryptonight' algorithm.
[2018-01-25 18:37:37] Stratum connection failed: Failed to connect to t1b.bpgmr.com port 5555: Connection refused
[2018-01-25 18:37:37] ...retry after 30 seconds

your pool doesnt work, how to mine?

i have over 10k coins

Hi Brunt, please, follow the item 3 (Notarize data in the B1tes TESTNET blockchain) in the B1tes TESTNET instructions above. In item 3, there are instructions on how to use notarize date using the transfer command.

Hi Galapagos, thanks for your help in testing it!

If you verify the timestamp from the wallet that executed the transfer of funds (through the notarizations command in simplewallet), the amount transferred will be shown as 0. But if you verify the timestamp from the wallet that received the transfer of funds, the amount transferred will be shown as 13/17 b1tes.

The code that informs the amount transferred is provided only to the wallet that receives transfer of funds.

I don't understand the transfer command. How do I send B1TES to another address?

help gives me:

transfer             transfer [ ... ] [payment_id] - Transfer ,... to ,... , respectively. is the number of transactions yours is indistinguishable from (from 0 to maximum available)

I have no idea what these parameters mean.

Brunt, Send something for nothing? You are obviously a chngeling!
but seriously. Make a second wallet and send it to yourself.

I have mined a few B1TES, and also a few testnet B1TES.
Where can I send them, to test whether sending works correctly?

Hi Dev,
I've tested following your instruction, it seem to work without problems.
The only thing that I don't know if it is right is that I've sand from my wallet to my wallets with some amount in it (13/17 b1tes) and when I do the timestamp verification it shows no amount. It's how it as to be?

https://www.dropbox.com/s/woh9cv1bpcmva6x/Ver_timestamp_b1tes.jpg

DEV! you are alive?

Hi everyone,

I would like to ask you to volunteer in testing and analysing the code of a functionality that timestamps data in the Blockchain which has been added to the B1tes TESTNET source code.  

The B1tes project is based on the source code of a cryptonote cryptocurrency called Aeon, which features untraceable payments and unlinkable transactions. For more info about the project, go to: https://bitcointalksearch.org/topic/m.20905435

To test the functionality that timestamps data in the Blockchain you have to install the B1tes TESTNET blockchain on linux following the instructions below.

Instructions on how to:

     1. Install B1tes TESTNET blockchain
     2. Create a B1tes TESTNET wallet and mine B1tes TESTNET
     3. Notarize data in the B1tes TESTNET blockchain
          3.1. Notarize document file in the B1tes TESTNET blockchain
          3.2. Notarize text in the B1tes TESTNET blockchain
     4. Verify timestamp of notarized data in the B1tes TESTNET blockchain

     1. Install B1tes TESTNET blockchain:
          - open your command line terminal
          - Execute the following commands to get the dependencies needed in order to setup the environment to run the B1tes TESTNET blockchain:
               - sudo apt-get install build-essential
               - sudo apt-get install git
               - sudo apt-get install cmake
               - sudo apt-get install libboost-all-dev
          - Clone B1tes TESTNET source code:
               - create a directory called testnet-b1tes by running the command:
                    - mkdir testnet-b1tes
               - enter the testnet-b1tes directory by running the command:
                    - cd testnet-b1tes
               - clone B1tes TESTNET source code by running the command:
                        - git clone https://github.com/b1tes/testnet-b1t
               - enter the testnet-b1t directory by running the command:
                    - cd testnet-b1t
               - build b1tes source code by running the command:
                    - make
               - wait until building b1tes TESTNET source code is 100% complete
               - enter the build directory by running the command:
                    - cd build/release/src/
               - download B1tes blockchain by running the command:
                    - ./testnet-b1tesd
               - leave this terminal command line open (it may take a couple of hours until the B1tes TESTNET blockchain is downloaded and synchronized to the network).
               - and open a new terminal command line in order to create a B1tes TESTNET wallet and mine B1tes TESTNET. (You’ll only be able to synchronize a B1tes TESTNET wallet to the network and mine B1tes TESTNET if the B1tes TESTNET blockchain is downloaded and synchronized to the network on another terminal command line running the command testnet-b1tesd concurrently.)

     2. Create a B1tes TESTNET wallet and mine B1tes TESTNET:
          - complete instructions 1 in order to create a B1tes TESTNET wallet
          - and open a new terminal command line in order to create a B1tes TESTNET walled and mine B1tes TESTNET
          - enter B1tes TESTNET build directory by running the command:
                    - cd ~your_directory~/testnet-b1tes/testnet-b1t/build/release/src
          - create a B1tes TESTNET wallet by running the command:
                    - ./simplewallet
          - follow the instructions in order to Generate a new wallet by giving a wallet file name and password
          - finally, inside simplewallet’s command line program, start mining B1tes TESTNET by running the following command:
                    - start_mining        

     3. Notarize data in the B1tes TESTNET blockchain:
          3.1. Notarize document file in the B1tes TESTNET blockchain:
               - open a new terminal command line and install OpenSSL by running the command:
                    - sudo apt-get install openssl
               - generate a SHA-256 signature through openssl by running the command:
                    - openssl sha -sha256  filename
                    - for example: openssl sha -sha256 /home/user/Documents/contract.pdf
               - keep a copy of the resulting SHA-256 signature, which should be pasted along with the next command
               - in simplewallet’s command line program, transfer funds to a wallet by running the command:
                    - transfer 1
          3.2. Notarize text in the B1tes TESTNET blockchain:
               - access http://www.xorbin.com/tools/sha256-hash-calculator
               - type the text to be notarized in the data field
               - click on "Calculate SHA256 hash"
               - keep a copy of the resulting SHA-256 signature, which should be pasted along with the next command
               - in simplewallet’s command line program, transfer funds to a wallet by running the command:
                    - transfer 1

     4. Verify timestamp of notarized data in the B1tes TESTNET blockchain:
          - in simplewallet’s command line program, refresh the wallet by running the command:
               - refresh
          - and verify the timestamp of notarized data by running the command:
               - notarizations
               - please notice that, if you verify the timestamp from the wallet that executed the transfer of funds (through the notarizations command in simplewallet), the amount transferred will be shown as 0. But if you verify the timestamp from the wallet that received funds, the the exact amount transferred will be shown, as the code that informs the amount transferred is provided only to the wallet that receives transfer of funds.

thank dev that you are alive, i was thinking that this coin is dead.