Topic: [ANN] BBQcoin Pool Now Released!!! (Read 4771 times)
Because you're solo mining there's crazy amounts of luck and variance involved guys...I get blocks back to back the same minute sometimes and then nothing for a couple hours...it's random so unless you've been mining for hours without any luck I'd chill out.
1hr for 1 block max @ ~800kh
How long are the rounds actually supposed to be? You haven't found any blocks yet.
any other pool there in solo mining i get 662 accepted/588stales, i use guiminer scrypt
I am running 3 cards in total of 2000~
It seems like it comes and goes a little.
its not much work to setup p2pool for bbq, i just need the correct coin data to do it.
It can be done by using this code
https://github.com/gerco/p2pool (added bytecoin support in this code, orginal code is here https://github.com/forrestv/p2pool )
Just clone the litecoin info in 2 different files, and it should be ready to go
It seems like it comes and goes a little.
its not much work to setup p2pool for bbq, i just need the correct coin data to do it.
It can be done by using this code
https://github.com/gerco/p2pool (added bytecoin support in this code, orginal code is here https://github.com/forrestv/p2pool )
Just clone the litecoin info in 2 different files, and it should be ready to go
i will try it now, i get like 1hr nothing and then find block, another find in 6 mins and thet again no luck in a 1hr?
can i use same worker (in client) for solo mining with different worker in guiminer scrypt?
can i use same worker (in client) for solo mining with different worker in guiminer scrypt?
i am interested in this too, more than 1 hr passed i get nothing?
I think I may have figured it out. I think if the intensity is to high it doesn't work properly. Intensity at 19 doesn't find anything for 12 hours. Intensity 13, mines a block in 20 minutes.Can anyone explain why this is happening, or if they've seen this before?
i am interested in this too, more than 1 hr passed i get nothing?
Works fine here solomining. Got around 2000 in 6-8 hours.
Getting some rejects.
If someone want to help me get the data needed to add it to p2pool i will setup a p2pool for bbq coin.
What khash do you have? Getting some rejects.
If someone want to help me get the data needed to add it to p2pool i will setup a p2pool for bbq coin.
Works fine here solomining. Got around 2000 in 6-8 hours.
Getting some rejects.
If someone want to help me get the data needed to add it to p2pool i will setup a p2pool for bbq coin.
Getting some rejects.
If someone want to help me get the data needed to add it to p2pool i will setup a p2pool for bbq coin.
is there any online site where can i see how much coins should i generate? or i can use litecoin calculator, since it is a scrypt, and change diff?
Yeah I just used a litecoin calculator and changed the difficulty to like 0.14. It said I should be making over 6000 BQC a day, which I thought was a bit strange, so I'm guessing that's wrong.Quote
@redmist, i am with your question too, i mine like with ~1600kh just curious to give it a try, and i find 1 block (+42coins) in approximately 50mins?
Yeah. It's kind of annoying. Originally it worked perfectly and I mined loads in the first 2 hours, now I'm not getting anything.
is there any online site where can i see how much coins should i generate? or i can use litecoin calculator, since it is a scrypt, and change diff?
@redmist, i am with your question too, i mine like with ~1600kh just curious to give it a try, and i find 1 block (+42coins) in approximately 50mins?
@redmist, i am with your question too, i mine like with ~1600kh just curious to give it a try, and i find 1 block (+42coins) in approximately 50mins?
Okay, now I've got a bit of a problem. Yesterday I mined 5 blocks in 2 hours. I left it on overnight and its been mining for 12 hours since then and I've mined 0 blocks. I'm justing getting this message every 2 minutes constantly:
New block detected on network
I've even managed to up my hash rate from 680 to 930 and I'm still not getting any blocks. If anyone could suggest why that would be great, as I'm trying to rack up some BQC's before the difficulty gets to high.
New block detected on network
I've even managed to up my hash rate from 680 to 930 and I'm still not getting any blocks. If anyone could suggest why that would be great, as I'm trying to rack up some BQC's before the difficulty gets to high.
Any progress on the pool??
i cant get it to work?
try all in this post
i use Guiminer scrypt
try all in this post
i use Guiminer scrypt
I can't seem to get this solomining working.. Did everything as mentioned above, but always get this message in cgminer: pool 0 slow/down or url or credentials invalid
I'm sure my url (localhost) en credentials are ok.. Any advice?
I'm sure my url (localhost) en credentials are ok.. Any advice?
Add this in the bbqcoin.conf file.
rpcport=7100
rpcallowip=*.*.*.*
Then point your miner app to that port. Should work.
Worked like a charm! So the port was supposed to be 7100? Strange!
Its to be sure what the port is, any port works
the winning tip was rpcallowip=*.*.*.*
But make sure that computer isnt connected direcly on internet or change the rpcallowip=192.168.0.* etc.. depends on your home network
Well, I learned something new today. Thanks!
I can't seem to get this solomining working.. Did everything as mentioned above, but always get this message in cgminer: pool 0 slow/down or url or credentials invalid
I'm sure my url (localhost) en credentials are ok.. Any advice?
I'm sure my url (localhost) en credentials are ok.. Any advice?
Add this in the bbqcoin.conf file.
rpcport=7100
rpcallowip=*.*.*.*
Then point your miner app to that port. Should work.
Worked like a charm! So the port was supposed to be 7100? Strange!
Its to be sure what the port is, any port works
the winning tip was rpcallowip=*.*.*.*
But make sure that computer isnt connected direcly on internet or change the rpcallowip=192.168.0.* etc.. depends on your home network
I can't seem to get this solomining working.. Did everything as mentioned above, but always get this message in cgminer: pool 0 slow/down or url or credentials invalid
I'm sure my url (localhost) en credentials are ok.. Any advice?
I'm sure my url (localhost) en credentials are ok.. Any advice?
Add this in the bbqcoin.conf file.
rpcport=7100
rpcallowip=*.*.*.*
Then point your miner app to that port. Should work.
Worked like a charm! So the port was supposed to be 7100? Strange!
I can't seem to get it working with ScryptMiner, can someone help?
I can't seem to get this solomining working.. Did everything as mentioned above, but always get this message in cgminer: pool 0 slow/down or url or credentials invalid
I'm sure my url (localhost) en credentials are ok.. Any advice?
I'm sure my url (localhost) en credentials are ok.. Any advice?
Add this in the bbqcoin.conf file.
rpcport=7100
rpcallowip=*.*.*.*
Then point your miner app to that port. Should work.
Jump to: