Even if you specify GPU to use with -d with mtp, why everything moves.
Also, although it may be said that it is under test, the speed starts without problems even at the beginning,
but when interrupted occurs, it is only rejected.
Environment RX570x8Gx5, RX580x8Gx2, RX570x4Gx1 (because it can not be excluded)
Topic: [ANN] Best sgminer so far for x22i/lyra2Z/phi2/allium on AMD - page 4. (Read 28519 times)
February 03, 2019, 07:22:52 PM
February 02, 2019, 03:44:50 PM
Trying to mine ZCoin mtp with default settings on the 4x480 rig.
Miner crashes every few minutes...
How to fix that?
Try to decrease intensity and put in BAT-file of the miner argument -g 1. This miner is working even with RX460 4 Gb, but hashrate is ridiculous. Miner crashes every few minutes...
How to fix that?
February 02, 2019, 02:22:55 PM
Trying to mine ZCoin mtp with default settings on the 4x480 rig.
Miner crashes every few minutes...
How to fix that?
Miner crashes every few minutes...
How to fix that?
As a work around, you can put the command in a while loop so that it restarts after crash
February 02, 2019, 05:06:05 AM
Trying to mine ZCoin mtp with default settings on the 4x480 rig.
Miner crashes every few minutes...
How to fix that?
Miner crashes every few minutes...
How to fix that?
February 02, 2019, 12:39:53 AM
Kinda . I was guessing you have GPU in hand . I`ll test it myself later on today and will write if there is any issues with the shares .
February 01, 2019, 08:30:25 PM
Fancy , Nicehash added Lyra2Rev3 however since i know them too well .. there is probably some issue with the miners (dont have GPu right now to test it) . If you have 1 can you check it out ? (They added Grin and Beam too ... but with different requirements and such). usually on their github there is explanation (for beam and grin exist one with instructions) however for Lyra2rev3 there is nothing yet .
Regards
Regards
Can you provide the link to that sgminer?
Edit:
Never mind. Seems like you'd like me to run this miner on nicehash pool
February 01, 2019, 02:29:48 PM
Fancy , Nicehash added Lyra2Rev3 however since i know them too well .. there is probably some issue with the miners (dont have GPu right now to test it) . If you have 1 can you check it out ? (They added Grin and Beam too ... but with different requirements and such). usually on their github there is explanation (for beam and grin exist one with instructions) however for Lyra2rev3 there is nothing yet .
Regards
Regards
February 01, 2019, 01:52:22 PM
Help me!
I wanted to mined ARG, but the miner gives an error on all pools. With ZMY and DYN everything is ok.
I wanted to mined ARG, but the miner gives an error on all pools. With ZMY and DYN everything is ok.
As far as i know, the miner only supports Argon2D500 which is the algorithm used by DYN,
Zumy uses Argon2D250
ARG uses Argon2D4096
Right...Don't have time to work on other variants.
February 01, 2019, 03:39:49 AM
Help me!
I wanted to mined ARG, but the miner gives an error on all pools. With ZMY and DYN everything is ok.
https://picua.org/images/2019/01/31/77df6aaddb15e67afc4ea572fa6078f5.jpg
I wanted to mined ARG, but the miner gives an error on all pools. With ZMY and DYN everything is ok.
https://picua.org/images/2019/01/31/77df6aaddb15e67afc4ea572fa6078f5.jpg
As far as i know, the miner only supports Argon2D500 which is the algorithm used by DYN,
Zumy uses Argon2D250
ARG uses Argon2D4096
Understand. Thanks.
February 01, 2019, 02:10:27 AM
Help me!
I wanted to mined ARG, but the miner gives an error on all pools. With ZMY and DYN everything is ok.
I wanted to mined ARG, but the miner gives an error on all pools. With ZMY and DYN everything is ok.
As far as i know, the miner only supports Argon2D500 which is the algorithm used by DYN,
Zumy uses Argon2D250
ARG uses Argon2D4096
Supports Windows and Linux. Supports windows driver and Linux AMDGPU Pro driver. Supports most cards. Comes with pre-built binary kernels to speed up Ellesmere and Vega cards.
https://github.com/fancyIX/sgminer-phi2-branch/releases/tag/5.6.1.3.b4b
Estimated speed:
phi2, rx 580: 1800khs; vega 56: 3300khs
lyra2Z, rx 580: 830khs; vega 56: 1620khs
I know that's far below the speed of tdxminer or teamredminer, but it's supports windows and Vega on Linux. And I am working on improving it. Hope one day it can be comparable with tdxminer.
https://github.com/fancyIX/sgminer-phi2-branch/releases/tag/5.6.1.3.b4b
Estimated speed:
phi2, rx 580: 1800khs; vega 56: 3300khs
lyra2Z, rx 580: 830khs; vega 56: 1620khs
I know that's far below the speed of tdxminer or teamredminer, but it's supports windows and Vega on Linux. And I am working on improving it. Hope one day it can be comparable with tdxminer.
Beta5 release, about 30% faster
https://github.com/fancyIX/sgminer-phi2-branch/releases/tag/5.6.1.3.b5
Beta5b release:
https://github.com/fancyIX/sgminer-phi2-branch/releases/tag/5.6.1.3.b5b
Speed compare of release (beta5b) than previous release (beta5): 580 +25%, Vega56 +35% for phi2, and 580 -15%, Vega56 +35% for lyra2Z .
Beta5c release, added allium support. Others are the same as beta5b.
https://github.com/fancyIX/sgminer-phi2-branch/releases/tag/5.6.1.3.b5c
Beta5d release, much faster than beta5c, especially for 580.
https://github.com/fancyIX/sgminer-phi2-branch/releases/tag/5.6.1.3.b5d
Beta 5e release, now support x22i. Others keep the same as beta5d:
https://github.com/fancyIX/sgminer-phi2-branch/releases
Will improve the performance further.
Beta5f release. x22i over 25% faster than beta5e, lyra2rev2 over 4x faster.
https://github.com/fancyIX/sgminer-phi2-branch/releases
Beta5f+ release, for x22i, 580 5% faster, Vega56 15% faster. ADL added so that you can monitor your GPU. https://github.com/fancyIX/sgminer-phi2-branch/releases
Beta5f++: little bit faster. https://github.com/fancyIX/sgminer-phi2-branch/releases
Windows version may hang. If so, please revisit the release page and download the fixed file.
Beta5f++++ release, vega 10% faster. 580 improved a bit, for x22i.
https://github.com/fancyIX/sgminer-phi2-branch/releases
Beta5fp5 release, x22i around 5% faster.
https://github.com/fancyIX/sgminer-phi2-branch/releases
Beta5gp1 release, lyra2REv3 support. Comes with prebuilt bin kernels for better performance.
Estimated speed: Vega56 64mhs, 580 41mhs.
https://github.com/fancyIX/sgminer-phi2-branch/releases/tag/5.6.1.3.b5gp1
Beta5gp3 release, added lyra2Zz support.
https://github.com/fancyIX/sgminer-phi2-branch/releases
Beat5h release, starts to support ethash:
https://github.com/fancyIX/sgminer-phi2-branch/releases
Beta5hp1, starts to support argon2d. Maybe a little bit faster or slower than Dynamic-GPU-Miner-AMD
https://github.com/fancyIX/sgminer-phi2-branch/releases
Beta5i, added mtp support (still under testing)
https://github.com/fancyIX/sgminer-phi2-branch/releases
Help me!
I wanted to mined ARG, but the miner gives an error on all pools. With ZMY and DYN everything is ok.
https://picua.org/images/2019/01/31/77df6aaddb15e67afc4ea572fa6078f5.jpg
I wanted to mined ARG, but the miner gives an error on all pools. With ZMY and DYN everything is ok.
https://picua.org/images/2019/01/31/77df6aaddb15e67afc4ea572fa6078f5.jpg
Supports Windows and Linux. Supports windows driver and Linux AMDGPU Pro driver. Supports most cards. Comes with pre-built binary kernels to speed up Ellesmere and Vega cards.
https://github.com/fancyIX/sgminer-phi2-branch/releases/tag/5.6.1.3.b4b
Estimated speed:
phi2, rx 580: 1800khs; vega 56: 3300khs
lyra2Z, rx 580: 830khs; vega 56: 1620khs
I know that's far below the speed of tdxminer or teamredminer, but it's supports windows and Vega on Linux. And I am working on improving it. Hope one day it can be comparable with tdxminer.
https://github.com/fancyIX/sgminer-phi2-branch/releases/tag/5.6.1.3.b4b
Estimated speed:
phi2, rx 580: 1800khs; vega 56: 3300khs
lyra2Z, rx 580: 830khs; vega 56: 1620khs
I know that's far below the speed of tdxminer or teamredminer, but it's supports windows and Vega on Linux. And I am working on improving it. Hope one day it can be comparable with tdxminer.
Beta5 release, about 30% faster
https://github.com/fancyIX/sgminer-phi2-branch/releases/tag/5.6.1.3.b5
Beta5b release:
https://github.com/fancyIX/sgminer-phi2-branch/releases/tag/5.6.1.3.b5b
Speed compare of release (beta5b) than previous release (beta5): 580 +25%, Vega56 +35% for phi2, and 580 -15%, Vega56 +35% for lyra2Z .
Beta5c release, added allium support. Others are the same as beta5b.
https://github.com/fancyIX/sgminer-phi2-branch/releases/tag/5.6.1.3.b5c
Beta5d release, much faster than beta5c, especially for 580.
https://github.com/fancyIX/sgminer-phi2-branch/releases/tag/5.6.1.3.b5d
Beta 5e release, now support x22i. Others keep the same as beta5d:
https://github.com/fancyIX/sgminer-phi2-branch/releases
Will improve the performance further.
Beta5f release. x22i over 25% faster than beta5e, lyra2rev2 over 4x faster.
https://github.com/fancyIX/sgminer-phi2-branch/releases
Beta5f+ release, for x22i, 580 5% faster, Vega56 15% faster. ADL added so that you can monitor your GPU. https://github.com/fancyIX/sgminer-phi2-branch/releases
Beta5f++: little bit faster. https://github.com/fancyIX/sgminer-phi2-branch/releases
Windows version may hang. If so, please revisit the release page and download the fixed file.
Beta5f++++ release, vega 10% faster. 580 improved a bit, for x22i.
https://github.com/fancyIX/sgminer-phi2-branch/releases
Beta5fp5 release, x22i around 5% faster.
https://github.com/fancyIX/sgminer-phi2-branch/releases
Beta5gp1 release, lyra2REv3 support. Comes with prebuilt bin kernels for better performance.
Estimated speed: Vega56 64mhs, 580 41mhs.
https://github.com/fancyIX/sgminer-phi2-branch/releases/tag/5.6.1.3.b5gp1
Beta5gp3 release, added lyra2Zz support.
https://github.com/fancyIX/sgminer-phi2-branch/releases
Beat5h release, starts to support ethash:
https://github.com/fancyIX/sgminer-phi2-branch/releases
Beta5hp1, starts to support argon2d. Maybe a little bit faster or slower than Dynamic-GPU-Miner-AMD
https://github.com/fancyIX/sgminer-phi2-branch/releases
Recently, a new coin called a Grin has appeared. She has a new hash algorithm, Cuckoo Cycle PoW. Perhaps you would be interested to add it to your miner?
https://bitcointalksearch.org/topic/ann-grin-pow-mining-electronic-transactions-for-all-community-driven-5090427
https://bitcointalksearch.org/topic/ann-grin-pow-mining-electronic-transactions-for-all-community-driven-5090427
Already filed an issue for that: https://github.com/fancyIX/sgminer-phi2-branch/issues/150
Personally I don't like that coin just because their logo looks so unprofessional.
Also, I cannot see a direct benefit of applying cross lane instructions to do the shuffling. But will spend more time on it.
Recently, a new coin called a Grin has appeared. She has a new hash algorithm, Cuckoo Cycle PoW. Perhaps you would be interested to add it to your miner?
https://bitcointalksearch.org/topic/ann-grin-pow-mining-electronic-transactions-for-all-community-driven-5090427
https://bitcointalksearch.org/topic/ann-grin-pow-mining-electronic-transactions-for-all-community-driven-5090427
do you think you could implement argon2d250 and argon2d500 for amd gpu?
this person was able to do it based off of ccminer-opt by jayddee.
https://bitcointalksearch.org/topic/argon2d-gpu-miner-5053255
https://github.com/bogdanadnan/multiminer
this person was able to do it based off of ccminer-opt by jayddee.
https://bitcointalksearch.org/topic/argon2d-gpu-miner-5053255
https://github.com/bogdanadnan/multiminer
wow, lots of shuffling in that algo. That's what I like most -- apply GCN cross lane instructions to speed it up.
would love to see you get this done. my rx580 does 60khash. can't get any good results with my vegas.
do you think you could implement argon2d250 and argon2d500 for amd gpu?
this person was able to do it based off of ccminer-opt by jayddee.
https://bitcointalksearch.org/topic/argon2d-gpu-miner-5053255
https://github.com/bogdanadnan/multiminer
this person was able to do it based off of ccminer-opt by jayddee.
https://bitcointalksearch.org/topic/argon2d-gpu-miner-5053255
https://github.com/bogdanadnan/multiminer
wow, lots of shuffling in that algo. That's what I like most -- apply GCN cross lane instructions to speed it up.
do you think you could implement argon2d250 and argon2d500 for amd gpu?
this person was able to do it based off of ccminer-opt by jayddee.
https://bitcointalksearch.org/topic/argon2d-gpu-miner-5053255
https://github.com/bogdanadnan/multiminer
this person was able to do it based off of ccminer-opt by jayddee.
https://bitcointalksearch.org/topic/argon2d-gpu-miner-5053255
https://github.com/bogdanadnan/multiminer
Miner 5.6.1.3.b5h driver Adrenalin 18.6.1 RX 470 4GB 1100/1900
x22i 3.6 Mhs
ethash 26.25
lyra2Zz 1.4 Mhs
allium 3.0 Mhs (no change)
phi2 2.6 Mhs (no change)
lyra2Z 1.4 Mhs (no change)
lyra2rev2 22.7 Mhs
P.S. On the ethash algorithm on the same cards (in the same settings) Claymore's Dual Miner 12 gives 28.2 Mhs. Good job!
x22i 3.6 Mhs
ethash 26.25
lyra2Zz 1.4 Mhs
allium 3.0 Mhs (no change)
phi2 2.6 Mhs (no change)
lyra2Z 1.4 Mhs (no change)
lyra2rev2 22.7 Mhs
P.S. On the ethash algorithm on the same cards (in the same settings) Claymore's Dual Miner 12 gives 28.2 Mhs. Good job!
Yeah... Still slower than commercial miners. Since the main purpose of this project is open source, hope people can still get benefit from it.
Miner 5.6.1.3.b5h driver Adrenalin 18.6.1 RX 470 4GB 1100/1900
x22i 3.6 Mhs
ethash 26.25
lyra2Zz 1.4 Mhs
allium 3.0 Mhs (no change)
phi2 2.6 Mhs (no change)
lyra2Z 1.4 Mhs (no change)
lyra2rev2 22.7 Mhs
P.S. On the ethash algorithm on the same cards (in the same settings) Claymore's Dual Miner 12 gives 28.2 Mhs. Good job!
x22i 3.6 Mhs
ethash 26.25
lyra2Zz 1.4 Mhs
allium 3.0 Mhs (no change)
phi2 2.6 Mhs (no change)
lyra2Z 1.4 Mhs (no change)
lyra2rev2 22.7 Mhs
P.S. On the ethash algorithm on the same cards (in the same settings) Claymore's Dual Miner 12 gives 28.2 Mhs. Good job!
Jump to: