Pages:
Author

Topic: [ANN] Bi•Fury | 5 GH/s USB Miner [IN STOCK!] {SALE !} - page 13. (Read 305017 times)

member
Activity: 110
Merit: 10
Hi There,

so i have 2 5ghs bi-fury modules. i try to use them with Windows but i got several Problems with that. under Windows XP its unable to use the Driver from bfgminer. they are not accepted. under Windows 7 it install with Error unable to start. I think the Driver is not working too there.
Is an USB 3.0 hub necassary to use this Blocks?  Can anybody help please Sad

Where did you find drivers for bfgminer? i can only find the BFGminer windows inf file and then i don't know what to do...

Here's the FTDI drivers for BFGminer:

http://www.ftdichip.com/FTDrivers.htm

Pick your OS,plug your device in with it powered,run the driver,then you may need to reboot.Check in device manager to see if your device shows,if not reinstall driver.Run BFGminer,it should work  Wink
So you say that i should only install the drivers on windows and nothing on the fury?
Now the name in control panel is Bi•Fury (COM3) Ports (COM & LPT) Manufacturer: c-scape for Cryptopol
Trying to find it with bfgminer and nothing, and the green and red lights are on the Bi•Fury, Red light does not feel like its good.
Now green light is on, but this? and then red light was on again...
member
Activity: 110
Merit: 10
Hi There,

so i have 2 5ghs bi-fury modules. i try to use them with Windows but i got several Problems with that. under Windows XP its unable to use the Driver from bfgminer. they are not accepted. under Windows 7 it install with Error unable to start. I think the Driver is not working too there.
Is an USB 3.0 hub necassary to use this Blocks?  Can anybody help please Sad

Where did you find drivers for bfgminer? i can only find the BFGminer windows inf file and then i don't know what to do...

Here's the FTDI drivers for BFGminer:

http://www.ftdichip.com/FTDrivers.htm

Pick your OS,plug your device in with it powered,run the driver,then you may need to reboot.Check in device manager to see if your device shows,if not reinstall driver.Run BFGminer,it should work  Wink
So you say that i should only install the drivers on windows and nothing on the fury?
Now the name in control panel is Bi•Fury (COM3) Ports (COM & LPT) Manufacturer: c-scape for Cryptopol
Trying to find it with bfgminer and nothing, and the green and red lights are on the Bi•Fury, Red light does not feel like its good.
member
Activity: 110
Merit: 10
Hi There,

so i have 2 5ghs bi-fury modules. i try to use them with Windows but i got several Problems with that. under Windows XP its unable to use the Driver from bfgminer. they are not accepted. under Windows 7 it install with Error unable to start. I think the Driver is not working too there.
Is an USB 3.0 hub necassary to use this Blocks?  Can anybody help please Sad

Where did you find drivers for bfgminer? i can only find the BFGminer windows inf file and then i don't know what to do...

Here's the FTDI drivers for BFGminer:

http://www.ftdichip.com/FTDrivers.htm

Pick your OS,plug your device in with it powered,run the driver,then you may need to reboot.Check in device manager to see if your device shows,if not reinstall driver.Run BFGminer,it should work  Wink
So you say that i should only install the drivers on windows and nothing on the fury?
legendary
Activity: 2212
Merit: 1001
Hi There,

so i have 2 5ghs bi-fury modules. i try to use them with Windows but i got several Problems with that. under Windows XP its unable to use the Driver from bfgminer. they are not accepted. under Windows 7 it install with Error unable to start. I think the Driver is not working too there.
Is an USB 3.0 hub necassary to use this Blocks?  Can anybody help please Sad

Where did you find drivers for bfgminer? i can only find the BFGminer windows inf file and then i don't know what to do...

Here's the FTDI drivers for BFGminer:

http://www.ftdichip.com/FTDrivers.htm

Pick your OS,plug your device in with it powered,run the driver,then you may need to reboot.Check in device manager to see if your device shows,if not reinstall driver.Run BFGminer,it should work  Wink
legendary
Activity: 2128
Merit: 1005
ASIC Wannabe
First of all, our main product is on a Christmas sale! - Yes, the price has dropped significantly.
If I buy 10 BiFury devices at $2999, I'll have ~50GH/s.
If I buy 10 ASICMiner Blades at $2499, I'll have ~100GH/s.
If I buy 6 ASICMiner Cubes at $2808, I'll have ~180GH/s.
$200 -$500 cheaper and two to three times the speed.  I just don't see any advantage in buying these compared to other devices currently available.  Am I missing something?
No you don't! But the question is: do you know a place where we can BUY NOW 10 ASICMiner Blades at $2499 or 6 ASICMiner Cubes at $2808 ?
Thanks!

Bitmain Antminer: easily overclocked to 200GH, 3.15BTC now
member
Activity: 110
Merit: 10
I installed with zadig , device as recognised as bifury , but none of the miners can see them

just says looking for devices .

help
same problem for me!
member
Activity: 110
Merit: 10
Hi There,

so i have 2 5ghs bi-fury modules. i try to use them with Windows but i got several Problems with that. under Windows XP its unable to use the Driver from bfgminer. they are not accepted. under Windows 7 it install with Error unable to start. I think the Driver is not working too there.
Is an USB 3.0 hub necassary to use this Blocks?  Can anybody help please Sad

Where did you find drivers for bfgminer? i can only find the BFGminer windows inf file and then i don't know what to do...
member
Activity: 61
Merit: 10
you can have mine . . . waste of money . no support
full member
Activity: 136
Merit: 100
who wants to sell me  used?
legendary
Activity: 2212
Merit: 1001
Zadig is for use with CGminer.....FTDI USB is for BFGminer  Wink

In both cases you need the devices connected & powered up,install the USB driver(either Zadig for CGminer or FTDI for BFGminer),then reboot the PC.It should work if CG or BFGminer has included the settings,otherwise you may need to "compile" the miner  Roll Eyes

I have had no luck in compiling miners in Win7 or Unbuntu Sad  I just use a bat file to set pool info & it works...for my BFL 30GH'er & Klondike's

Hope that helps,I don't have any of these miners,so its all I can offer  Sad
member
Activity: 61
Merit: 10
I installed with zadig , device as recognised as bifury , but none of the miners can see them

just says looking for devices .

help
member
Activity: 61
Merit: 10
same issue , windows 7 , no drivers
member
Activity: 71
Merit: 10
Hi There,

so i have 2 5ghs bi-fury modules. i try to use them with Windows but i got several Problems with that. under Windows XP its unable to use the Driver from bfgminer. they are not accepted. under Windows 7 it install with Error unable to start. I think the Driver is not working too there.
Is an USB 3.0 hub necassary to use this Blocks?  Can anybody help please Sad
full member
Activity: 134
Merit: 100
Bitleu Team
No you don't! But the question is: do you know a place where we can BUY NOW 10 ASICMiner Blades at $2499 or 6 ASICMiner Cubes at $2808 ?
Thanks!

Sure, check the Group Buys.  BitCanary has the Blades and two or three people are selling the Cubes there.
Thanks! 
newbie
Activity: 58
Merit: 0
No you don't! But the question is: do you know a place where we can BUY NOW 10 ASICMiner Blades at $2499 or 6 ASICMiner Cubes at $2808 ?
Thanks!

Sure, check the Group Buys.  BitCanary has the Blades and two or three people are selling the Cubes there.
-ck
legendary
Activity: 4088
Merit: 1631
Ruu \o/
New version of cgminer just posted, 3.9.0, has substantially improved support for the latest firmware of these devices.
legendary
Activity: 1610
Merit: 1000
First of all, our main product is on a Christmas sale! - Yes, the price has dropped significantly.

According to Sushi and a few others around here, BitCoinTalk members are only 1/3 as moronic as Ebay buyers.  While Ebay morons would be happy to pay $322 for 5GH/s, the moron here only want to pay 1/3 that price.  Honestly even $120 each would be my limit at this difficulty and BTC price.  $64 per GH is still way too high.

If I buy 10 BiFury devices at $2999, I'll have ~50GH/s.
If I buy 10 ASICMiner Blades at $2499, I'll have ~100GH/s.
If I buy 6 ASICMiner Cubes at $2808, I'll have ~180GH/s.

$200 -$500 cheaper and two to three times the speed.  I just don't see any advantage in buying these compared to other devices currently available.  Am I missing something?

Yes you do!
Because it is Christmas time you are missing the golden chance not to loose 100% of your investment but only 90%. Grin
Madness
full member
Activity: 134
Merit: 100
Bitleu Team
First of all, our main product is on a Christmas sale! - Yes, the price has dropped significantly.
If I buy 10 BiFury devices at $2999, I'll have ~50GH/s.
If I buy 10 ASICMiner Blades at $2499, I'll have ~100GH/s.
If I buy 6 ASICMiner Cubes at $2808, I'll have ~180GH/s.
$200 -$500 cheaper and two to three times the speed.  I just don't see any advantage in buying these compared to other devices currently available.  Am I missing something?
No you don't! But the question is: do you know a place where we can BUY NOW 10 ASICMiner Blades at $2499 or 6 ASICMiner Cubes at $2808 ?
Thanks!
hero member
Activity: 574
Merit: 500
1.21 GIGA WATTS
HO HO HO  Grin

Bi•Fury/Cryptostore crew wants to wish you all Merry Christmas!
We hope for you to spend this special time with your family and beloved ones.
We wish us all to see only smooth difficulty increases throughout the upcoming year and payments getting confirmed in seconds.
Let's make this time even more cheerful to everyone!


Merry Christmas to you and your family

Cheers and Thanks
merv77
newbie
Activity: 58
Merit: 0
First of all, our main product is on a Christmas sale! - Yes, the price has dropped significantly.

According to Sushi and a few others around here, BitCoinTalk members are only 1/3 as moronic as Ebay buyers.  While Ebay morons would be happy to pay $322 for 5GH/s, the moron here only want to pay 1/3 that price.  Honestly even $120 each would be my limit at this difficulty and BTC price.  $64 per GH is still way too high.

If I buy 10 BiFury devices at $2999, I'll have ~50GH/s.
If I buy 10 ASICMiner Blades at $2499, I'll have ~100GH/s.
If I buy 6 ASICMiner Cubes at $2808, I'll have ~180GH/s.

$200 -$500 cheaper and two to three times the speed.  I just don't see any advantage in buying these compared to other devices currently available.  Am I missing something?
Pages:
Jump to: