Pages:
Author

Topic: [ANN] Bitfury ASIC sales in EU and Europe - page 81. (Read 250482 times)

hero member
Activity: 910
Merit: 1000
Items flashing here available at btctrinkets.com
What PSU would you recommend for a starter kit that will hopefully be fully populated by october?

The M-board takes 2x 6pin PCI-E. I guess a Seasonic G-450 would do the trick, also power wise?

And I assume I will have to do the paperclip trick on the ATX connector?

Thanks for clarifying it for me  Grin
Any psu with 2x 6pin Pci-e is fine.. but incase you are planning to upgrade to a full kit eventually the I'd reccomed 500w or more.. and yes the old paperclip trick is in use Smiley
legendary
Activity: 1225
Merit: 1000
What PSU would you recommend for a starter kit that will hopefully be fully populated by october?

The M-board takes 2x 6pin PCI-E. I guess a Seasonic G-450 would do the trick, also power wise?

And I assume I will have to do the paperclip trick on the ATX connector?

Thanks for clarifying it for me  Grin
legendary
Activity: 1379
Merit: 1003
nec sine labore

I'm not sure if it small enough, but I intend to plug my Bitfury into Slush's pool.

Trupik,

it's the oldest one and below 50 TH... so go for it Smiley

spiccioli
legendary
Activity: 1379
Merit: 1003
nec sine labore
Thank you and your team, Punin. Fantastic job!!

BTW, does anyone recommend a good, reliable p2ppool? I heard some miners don't perform well on them due to latency issues.



If you're going the p2pool path the best option is to have your instance of bitcoind/p2pool software running, otherwise, just for a test and to be sure the embedded miner does work on p2pool you can select any pool from this list

https://bitcointalksearch.org/topic/m.2829721

the closer to you the better.

spiccioli
legendary
Activity: 1379
Merit: 1003
nec sine labore

We're now going to celebrate with my team here a bit.. been amazingly busy week.

Cheers!


You well deserve it and thank for the tracking number Wink

spiccioli
newbie
Activity: 7
Merit: 0
mikef: you may want to put the second H-Board into Bus B, slot one. It will cool itself better and it may even have positive impact on hashing speed, if I understand correctly.

Thanks for the suggestion - this has already been done. I think the effect on hashing speed was negligible with just two boards though.
member
Activity: 136
Merit: 13
mikef: you may want to put the second H-Board into Bus B, slot one. It will cool itself better and it may even have positive impact on hashing speed, if I understand correctly.
newbie
Activity: 2
Merit: 0
punin, just awesome job and thanks to all your team.
newbie
Activity: 7
Merit: 0
I received today order #221 which was for a 25GH Starter Kit. Like others, I got 2 boards, and they're happily mining at about 40 GHash/s total. I'd like to take the opportunity to thank punin for the awesome job!

http://users.damicon.fi/msiren/bitfury/IMG_2951.JPG
http://users.damicon.fi/msiren/bitfury/bf.png

//msiren
sr. member
Activity: 408
Merit: 250
Thank you and your team, Punin. Fantastic job!!

BTW, does anyone recommend a good, reliable p2ppool? I heard some miners don't perform well on them due to latency issues.

sr. member
Activity: 588
Merit: 252
Expected delivery 05.09.
Few days late but ~40 GH/s instead of 25. Well, that's just awesome. Smiley
legendary
Activity: 1792
Merit: 1047
Most of the shipment left the building, and should be on it's way to you by airplane later tonight.

I will be contacting those of you who might have gotten a shipment notice, but no shipment was actually sent out. This is because the automated CSV export exported also those orders that were combined. I think we got 99% shipped correctly, and I will communicate with those of you who might have confusing orders. Some few orders will ship on monday.

I want to thank you all for your support and patience as we practice serving you. We've learned a lot in this process, and hopefully future shipments will be less painful Smiley

We're now going to celebrate with my team here a bit.. been amazingly busy week.

Cheers!


Bravo and well done!
hero member
Activity: 560
Merit: 500
Most of the shipment left the building, and should be on it's way to you by airplane later tonight.

I will be contacting those of you who might have gotten a shipment notice, but no shipment was actually sent out. This is because the automated CSV export exported also those orders that were combined. I think we got 99% shipped correctly, and I will communicate with those of you who might have confusing orders. Some few orders will ship on monday.

I want to thank you all for your support and patience as we practice serving you. We've learned a lot in this process, and hopefully future shipments will be less painful Smiley

We're now going to celebrate with my team here a bit.. been amazingly busy week.

Cheers!
member
Activity: 136
Merit: 13
Scheduled Delivery: 10-September-2013

Sweet Jesus, are they delivering it on an oxcart or what?  Cheesy
sr. member
Activity: 350
Merit: 250
i have sept 6th estimate and im in the uk Cheesy
hero member
Activity: 525
Merit: 500
..yeah
I just got my tracking number, w00t

me too  Cheesy but no infos except expected delivery date (to germany) on september 5th :/
hero member
Activity: 910
Merit: 1000
Items flashing here available at btctrinkets.com
I drove to get my starter kit today, short update after 1h of running:

I got two h-boards for a total of 46-47Ghs. It's pulling 50-52w off the wall. Setup was a cakewalk when compared to my fpga experience.
full member
Activity: 189
Merit: 100
Also got my tracking numbers.
sr. member
Activity: 350
Merit: 250
I just got my tracking number, w00t
full member
Activity: 158
Merit: 100
If anyone is looking for a good small startup pool for BTC try give-me-coins.com
This has been started by Serraz  who also runs one of the biggest LTC and FTC  pools and is part of their new multi pool site.
Pages:
Jump to: