Topic: [ANN] Bitfury ASIC sales in EU and Europe - page 84. (Read 250482 times)
last shipped order nr. today? =)
We are working on web-based setup and stats. So getting up and running would require:
- Assembly according to included instructions (we're not included in first shipped units).
- Powering up
- Pointing web browser to your router to see what IP was given to RasPi (might not even be necessary as we have hosthame set).
- Pointing web browser to RasPi and entering your settings
- Assembly according to included instructions (we're not included in first shipped units).
- Powering up
- Pointing web browser to your router to see what IP was given to RasPi (might not even be necessary as we have hosthame set).
- Pointing web browser to RasPi and entering your settings
is there a method to change the rPI host name?
/cet
Yes, and it will be set to Bitfury by default. We're using 2013-07-28-Wheezy as the base, so you can do whatever linux magic you want
Quote
Hi!
I had order #217. It's hashing with only 54 watts from the wall!!
Very much thanks to Punin & Bitfury group!
Very nice.
I had order #217. It's hashing with only 54 watts from the wall!!
Very much thanks to Punin & Bitfury group!
Very nice.
Quote
I'd like to ask everyone that receives one to consider posting proof so the bet may be accurately resolved.
Yes, please do that.
We are working on web-based setup and stats. So getting up and running would require:
- Assembly according to included instructions (we're not included in first shipped units).
- Powering up
- Pointing web browser to your router to see what IP was given to RasPi (might not even be necessary as we have hosthame set).
- Pointing web browser to RasPi and entering your settings
- Assembly according to included instructions (we're not included in first shipped units).
- Powering up
- Pointing web browser to your router to see what IP was given to RasPi (might not even be necessary as we have hosthame set).
- Pointing web browser to RasPi and entering your settings
is there a method to change the rPI host name?
/cet
To 25 starter kit can i use next hboards? How many?
There are 16 slots on M-card. We're currently shipping 2 H-cards with starter kit (until we have boards and software that delivers 25GH), so you can fit 14 or 15 extra H-cards on starter kit depending how many you will get with it. after starting device(without monitor) can some1 explain step by step what to do (how to connect and control miner from PC, ty forwrd)))
me wanna be prepared for action)
me wanna be prepared for action)
We are working on web-based setup and stats. So getting up and running would require:
- Assembly according to included instructions (we're not included in first shipped units).
- Powering up
- Pointing web browser to your router to see what IP was given to RasPi (might not even be necessary as we have hosthame set).
- Pointing web browser to RasPi and entering your settings
To 25 starter kit can i use next hboards? How many?
Hi!
I had order #217. It's hashing with only 54 watts from the wall!!
Very much thanks to Punin & Bitfury group!
I had order #217. It's hashing with only 54 watts from the wall!!
Very much thanks to Punin & Bitfury group!
Very nice.
I'd like to ask everyone that receives one to consider posting proof so the bet may be accurately resolved.
I thought you had to populate the m-board in order (slot 1, slot 2, etc.) or the m-board would not see the later h-boards? It looks like you've spread the h-board out over the bus. Did they all come up and work?
/cet
/cet
These are version 2 m-boards, you can tell by the PCIe power connectors versus the ring terminal connectors on version 1. Version 2 boards need to have boards populated one per bank instead of in order.
Best way to populate is A1,B1,C1,D1 A2,B2………A4,B4,C4,D4. If you have problematic boards that give lot of errors try moving them as last card of bus.
after starting device(without monitor) can some1 explain step by step what to do (how to connect and control miner from PC, ty forwrd)))
me wanna be prepared for action)
me wanna be prepared for action)
some use SSH to control Ras pi.
after starting device(without monitor) can some1 explain step by step what to do (how to connect and control miner from PC, ty forwrd)))
me wanna be prepared for action)
me wanna be prepared for action)
I thought you had to populate the m-board in order (slot 1, slot 2, etc.) or the m-board would not see the later h-boards? It looks like you've spread the h-board out over the bus. Did they all come up and work?
/cet
/cet
These are version 2 m-boards, you can tell by the PCIe power connectors versus the ring terminal connectors on version 1. Version 2 boards need to have boards populated one per bank instead of in order.
That looks like another great improvement on the m-board! I didn't notice that the h-board slot number been updated, looks like identifying the banks will be easy.
/cet
Dyaheon,
did you get a tracking number when your unit was shipped and do you mind posting a photo of the assembled unit?
Thanks!
spiccioli
did you get a tracking number when your unit was shipped and do you mind posting a photo of the assembled unit?
Thanks!
spiccioli
I did, yeah. Anduck's pic will probably suffice?
My setup is ugly for now.Yes, thanks, it is enough
spiccioli
Important:
Also please note that if you are not populating the M-board fully the best results will be achieved by spreading the H-boards evenly between the four channels.
Also please note that if you are not populating the M-board fully the best results will be achieved by spreading the H-boards evenly between the four channels.
I thought you had to populate the m-board in order (slot 1, slot 2, etc.) or the m-board would not see the later h-boards? It looks like you've spread the h-board out over the bus. Did they all come up and work?
/cet
/cet
These are version 2 m-boards, you can tell by the PCIe power connectors versus the ring terminal connectors on version 1. Version 2 boards need to have boards populated one per bank instead of in order.
I thought you had to populate the m-board in order (slot 1, slot 2, etc.) or the m-board would not see the later h-boards? It looks like you've spread the h-board out over the bus. Did they all come up and work?
/cet
/cet
Seems they are now grouped into A B C D
I thought you had to populate the m-board in order (slot 1, slot 2, etc.) or the m-board would not see the later h-boards? It looks like you've spread the h-board out over the bus. Did they all come up and work?
/cet
/cet
Hi!
I had order #217. It's hashing with only 54 watts from the wall!!
Very much thanks to Punin & Bitfury group!
Great setup I had order #217. It's hashing with only 54 watts from the wall!!
Very much thanks to Punin & Bitfury group!
Dyaheon,
did you get a tracking number when your unit was shipped and do you mind posting a photo of the assembled unit?
Thanks!
spiccioli
did you get a tracking number when your unit was shipped and do you mind posting a photo of the assembled unit?
Thanks!
spiccioli
I did, yeah. Anduck's pic will probably suffice?
My setup is ugly for now. Jump to: