Pages:
Author

Topic: [ANN] [BLTZ] [IPO Hybrid] BlitzCoin | proof of concept coin | pure speculative - page 49. (Read 200984 times)

legendary
Activity: 1316
Merit: 1145
I'm mining it! Which is correct chain?

current block: 2182
current diff: 114.88

check it at http://cryptexplorer.com/chain/BlitzCoin
Block Explorer is correct
member
Activity: 98
Merit: 10
Sorry for being so impatient, but i have question,bounties will be sent in next few hours? ;p Don't be mad at me for asking


 Wink BLTZ: BLaBAFhC6kUZXmmEVfPrHbvp2VKytizWWa
newbie
Activity: 42
Merit: 0
LAUNCHED 26.03.2014 6PM GMT, diff already over 140! jump in quick or you will miss it. Only 6 more days of mining!
member
Activity: 84
Merit: 10
Why the FUCK do these pools seem so incompetent to mitigate DDoS attacks I mean come on some of these pools ahve been around for a long time and you can't get this shit right. And the DDoS fucking pricks should be shot in the fucking head. Cock suckers.

"And the DDoS fucking pricks should be shot in the fucking head" - 100% agree Smiley and most of the attacks come probably from competing pools.
We get them several times a day when our hash rate is much higher than that of other pools.

We put in a lot of coins to protect against ddos attacks but not every attack can be prevented in 100%. Unfortunately, sometimes protective measures that we employ, disconnect also "real" miners.

At huge ddos (a lot of Gb/s) there is no way to tell which is a true miner and which is a attacker.

So I apologise that some of you were disconnected.








 
member
Activity: 63
Merit: 10
So I downloaded the wallet and got only errors while I tried to install it.  Now I can't even get megaupload to let me download the file.  What gives.  I only have 150 coins in my pool balance but I sure would like to put them in a proper wallet.  Any ideas as to what I am doing wrong?
newbie
Activity: 42
Merit: 0
I'm gonna update checkpoints and release new windows wallet. It will be ready in like 2 hours. Quite a long for windows to compile..
member
Activity: 84
Merit: 10

HashFever has been paying out all night, now payouts are stuck!!

in the event of high ddos attacks we normally stop payouts to avoid possible errors in payment.

sorry for inconvenience

  
sr. member
Activity: 280
Merit: 250
how to receive ipo shares?
newbie
Activity: 42
Merit: 0
Network's hashrate at 15.78Gh/s... WOW
hero member
Activity: 606
Merit: 500
if somebody stuck wallet, try this, it's working for me:

I have sent a lot of coins to my unsync wallet (stopped on 737 block ) ... Is this a problem ? Do I only wait for sync ?

Close you wallet
Go to Start -> Run (or press WinKey+R) and run this:
%APPDATA%\BlitzCoin
delete everything BUT LEAVE wallet.dat
create new file: BlitzCoin.conf and add:
server=1
rpcuser=USER
rpcpassword=PASSWORD
addnode=89.164.145.53
addnode=93.188.215.21
addnode=37.187.129.122
addnode=96.46.206.30
addnode=188.165.194.96


start your wallet again and it should sync to the right chain

Important: Do not change the USER and PASSWORD fields
Why not?

in my situation did not work when I changed the password and user
newbie
Activity: 32
Merit: 0
My syncing stuck at 1031http://i57.tinypic.com/2007n2h.png then I restarted wallet and its synced?
After 5min started syncing again at 1033 and stuck...
Cant sync wallet. Any idea how to fix it?

I had your same problem this morning, I uninstalled the wallet, removed the files from % appdata%, and I've reinstalled the wallet, has synchronized well.

Remember your copy before wallet.dat and reinstall again when copying it to the %appdata% folder.
sr. member
Activity: 294
Merit: 250

Close you wallet
Go to Start -> Run (or press WinKey+R) and run this:
%APPDATA%\BlitzCoin
delete everything BUT LEAVE wallet.dat
create new file: BlitzCoin.conf and add:
server=1
rpcuser=USER
rpcpassword=PASSWORD
addnode=89.164.145.53
addnode=93.188.215.21
addnode=37.187.129.122
addnode=96.46.206.30
addnode=188.165.194.96


start your wallet again and it should sync to the right chain
Synced but all my coins are unconfirmed. HELP!
sr. member
Activity: 294
Merit: 250
if somebody stuck wallet, try this, it's working for me:

I have sent a lot of coins to my unsync wallet (stopped on 737 block ) ... Is this a problem ? Do I only wait for sync ?

Close you wallet
Go to Start -> Run (or press WinKey+R) and run this:
%APPDATA%\BlitzCoin
delete everything BUT LEAVE wallet.dat
create new file: BlitzCoin.conf and add:
server=1
rpcuser=USER
rpcpassword=PASSWORD
addnode=89.164.145.53
addnode=93.188.215.21
addnode=37.187.129.122
addnode=96.46.206.30
addnode=188.165.194.96


start your wallet again and it should sync to the right chain

Important: Do not change the USER and PASSWORD fields
Why not?
full member
Activity: 140
Merit: 100


On correct fork with OmarGPools settings! Spread hashrate, join p2pool Smiley
Address: bltz.p2phash.com

P2Pool benefits:

* No registration required
* Distributed hashrate
* Immediate payouts after a block is found
* Higher payouts with transaction fees paid to miners
* No account hack possible

Fee: only 0.5%
Start mining within seconds! Just point your miner to p2phash.com:4056 and use the Blitzcoin address from your wallet for username, the password doesn't matter.


You can now follow us on twitter: https://twitter.com/P2PHash
newbie
Activity: 3
Merit: 0
Wallet on Share-Online: BlitzCoin.zip

.conf file included - ready to use. No Password, MD5: 30cd35d85c46efd7de0a6fd13357b2c9
RJX
legendary
Activity: 1078
Merit: 1003
im using this command line and I get JSON error???

cgminer.exe --scrypt -o stratum+tcp://eu.hashing.at:3022 -u XXXX -p x --intensity 16 --gpu-engine 870 --gpu-memclock 1145 --worksize 256 --shaders 1440 --failover-only --queue=0 --scan-time=0 --expiry=1 -g 1

what's wrong?

scan-time 0?

try this:

cgminer.exe --scrypt -o stratum+tcp://eu.hashing.at:3022 -u XXXX -p x -I 16 --gpu-engine 870 --gpu-memclock 1145 -w 256 --shaders 1440 --failover-only -Q 0 -s 5 -g 1

Do not use "="

doesn't work, the json error is mostly caused by faulty user input, wrong port or typo, but that's not the case. So what's ging on here?

I solved it: worker has to be quoted as 'worker.worker' in batch. that's what i did wrong
hero member
Activity: 606
Merit: 500
if somebody stuck wallet, try this, it's working for me:

I have sent a lot of coins to my unsync wallet (stopped on 737 block ) ... Is this a problem ? Do I only wait for sync ?

Close you wallet
Go to Start -> Run (or press WinKey+R) and run this:
%APPDATA%\BlitzCoin
delete everything BUT LEAVE wallet.dat
create new file: BlitzCoin.conf and add:
server=1
rpcuser=USER
rpcpassword=PASSWORD
addnode=89.164.145.53
addnode=93.188.215.21
addnode=37.187.129.122
addnode=96.46.206.30
addnode=188.165.194.96


start your wallet again and it should sync to the right chain

Important: Do not change the USER and PASSWORD fields
member
Activity: 62
Merit: 10
WTB BLTZ 50,000+ , Will match market price send me PMs.
RJX
legendary
Activity: 1078
Merit: 1003
im using this command line and I get JSON error???

cgminer.exe --scrypt -o stratum+tcp://eu.hashing.at:3022 -u XXXX -p x --intensity 16 --gpu-engine 870 --gpu-memclock 1145 --worksize 256 --shaders 1440 --failover-only --queue=0 --scan-time=0 --expiry=1 -g 1

what's wrong?

scan-time 0?

try this:

cgminer.exe --scrypt -o stratum+tcp://eu.hashing.at:3022 -u XXXX -p x -I 16 --gpu-engine 870 --gpu-memclock 1145 -w 256 --shaders 1440 --failover-only -Q 0 -s 5 -g 1

Do not use "="

doesn't work, the json error is mostly caused by faulty user input, wrong port or typo, but that's not the case. So what's ging on here?
full member
Activity: 126
Merit: 100
http://www.multi-pool.eu
New stratum server over http://bltz.multi-pool.eu/

STRATUM:   stratum+tcp://stratum.multi-pool.eu
PORT:   3363

With 256 min diff set!
Ideal for the most powerful miner!

So now you can miner on stratum+tcp://stratum.multi-pool.eu:3362 or, if you have a big miner (> 2MHs) you can use stratum+tcp://stratum.multi-pool.eu:3363
Pages:
Jump to: