Hello ,
I am looking for how to use the ccminer API,
I have to put what command in the .bat?
thx
Topic: [ANN] ccminer 2.3 - opensource - GPL (tpruvot) - page 26. (Read 500271 times)
at this level do it yourself in miner.h
Great thanks a lot.
I've found it in miner.h line 558, #define MAX_GPUS 16 .
Can the next release raise this constant please ?
Would be nice not to compile for each future release for only one constant.
Hello. I'm trying to mine monacoin on suprnova with 3x1080ti using 1x-16x (ext power) risers. Compiled tpruvot/ccminer 2.2.2 okay, on debian 9, CUDA 8, gcc 4.9.
For some reason ccminer is working okay if I only use 2 1080ti's and no risers. But once I add risers in it stops working. Oddly enough, I can still run --benchmark, and it runs all algorithms okay with the risers.
I've tried stock Makefile.am and Makefile.am using the 1080 cuda arch. I tried lowering intensity and pwlimit. Debug output is not giving me much to go off of.
Any ideas on what's going on. Things I might try? Thanks
Code:
brownj@miner01:~/miner/monacoin$ ./ccminer -D -o stratum+tcp://mona.suprnova.cc:2995 -k lyra2v2 -u user.miner1 -p password
*** ccminer 2.2.2 for nVidia GPUs by tpruvot@github ***
Built with the nVidia CUDA Toolkit 8.0 64-bits
Originally based on Christian Buchner and Christian H. project
Include some kernels from alexis78, djm34, djEzo, tsiv and krnlx.
BTC donation address: 1AJdfCpLWPNoAMDfHF1wD5y8VgKSSTHxPo (tpruvot)
[2017-12-11 02:14:19] POOL 0: mona.suprnova.cc:2995 USER user.miner1 -s 10
[2017-12-11 02:14:19] Starting on stratum+tcp://mona.suprnova.cc:2995
[2017-12-11 02:14:19] restart_threads
[2017-12-11 02:14:19] dlopen(2): failed to load libnvidia-ml.so
[2017-12-11 02:14:19] GPU monitoring is not available.
[2017-12-11 02:14:19] 3 miner threads started, using 'auto' algorithm.
[2017-12-11 02:14:19] Binding thread 0 to cpu 0 (mask 1)
[2017-12-11 02:14:19] Binding thread 1 to cpu 1 (mask 2)
[2017-12-11 02:14:19] Binding thread 2 to cpu 2 (mask 4)
[2017-12-11 02:14:19] Stratum session id: deadbeefcafebabe9478010000000000
[2017-12-11 02:14:19] sleeptime: 500 ms
[2017-12-11 02:14:19] sleeptime: 500 ms
[2017-12-11 02:14:19] sleeptime: 500 ms
[2017-12-11 02:14:19] DEBUG: job_id=a2e304a 14a5 xnonce2=00000000 time=02:14:18
[2017-12-11 02:14:19] Stratum difficulty set to 64
[2017-12-11 02:14:19] job a2e304a 14a5 target change: 3fffc00 (64.0)
[2017-12-11 02:14:19] GPU #1: start=55555555 end=55655554 range=000fffff
[2017-12-11 02:14:19] DEBUG: job_id=a2e304a 14a5 xnonce2=01000000 time=02:14:18
[2017-12-11 02:14:19] job a2e304a 14a5 target change: 3fffc00 (64.0)
[2017-12-11 02:14:19] GPU #0: start=00000000 end=000fffff range=000fffff
[2017-12-11 02:14:19] DEBUG: job_id=a2e304a 14a5 xnonce2=02000000 time=02:14:18
[2017-12-11 02:14:19] job a2e304a 14a5 target change: 3fffc00 (64.0)
[2017-12-11 02:14:19] GPU #2: start=aaaaaaaa end=aabaaaa9 range=000fffff
[2017-12-11 02:14:20] stratum extranonce subscribe timed out
[2017-12-11 02:14:43] DEBUG: job_id=a2e3063 14a6 xnonce2=00000000 time=02:14:43
[2017-12-11 02:14:43] auto block 1186008, diff 68760.234
[2017-12-11 02:14:43] restart_threads
[2017-12-11 02:15:31] DEBUG: job_id=a2e3093 14a7 xnonce2=00000000 time=02:15:31
[2017-12-11 02:15:31] auto block 1186009, diff 73279.334
[2017-12-11 02:15:31] restart_threads
[2017-12-11 02:16:15] DEBUG: job_id=a2e30bf 14a8 xnonce2=00000000 time=02:16:15
[2017-12-11 02:16:15] auto block 1186010, diff 77111.905
[2017-12-11 02:16:15] restart_threads
[2017-12-11 02:16:24] DEBUG: job_id=a2e30c8 14a9 xnonce2=00000000 time=02:16:24
[2017-12-11 02:16:24] auto block 1186011, diff 76279.225
[2017-12-11 02:16:24] restart_threads
Good night folks, I need a little help, sorry for my newbie level 
I'm try mining lyra2v2 on ccminer 2.1 by tpruvot on Simplemining
Set the command line a milion times, worker on pool is fine.
My rig is 2 x 1060/ 2 x 1070
When start, get the follow erros.
Someone can do a good action and help-me please ?
Thanks.
I'm try mining lyra2v2 on ccminer 2.1 by tpruvot on Simplemining
Set the command line a milion times, worker on pool is fine.
My rig is 2 x 1060/ 2 x 1070
When start, get the follow erros.
Someone can do a good action and help-me please ?
Thanks.
Looks like an option you have to change in simplemining os. That's why I use windows 10. Unless your running 10 rigs and have to keep track of all of them I don't use simplemining. I think windows 10 drivers are more mature and If I had to pay for windows it will pay for itself in less than 2 years with the extra $10 you make every month vs. simplemining. I think simple mining will mature but i'll wait another year before revisiting. Thanks to all those willing to help develop a pure linux mining os...I will say this that it looks like you need to change your rig from mining skunkhash/ signatum to mining mona coin on suprnova. Contact someone at simplemining os and they should be able to shoot you back an email on how to change the mining options. Your setup looks allright excpt the quirkiness of simpleming configuration parameters.
Good night folks, I need a little help, sorry for my newbie level
I'm try mining lyra2v2 on ccminer 2.1 by tpruvot on Simplemining
Set the command line a milion times, worker on pool is fine.
My rig is 2 x 1060/ 2 x 1070
When start, get the follow erros.
Someone can do a good action and help-me please ?
Thanks.
I'm try mining lyra2v2 on ccminer 2.1 by tpruvot on Simplemining
Set the command line a milion times, worker on pool is fine.
My rig is 2 x 1060/ 2 x 1070
When start, get the follow erros.
Someone can do a good action and help-me please ?
Thanks.
Modifying the intensity (even the lowest setting) doesn't have any impact at all.
Quote
You do know this is for ccminer?
You'll be better off asking for help in their thread.
I did not understand, this topic is not for ccminer support?
If you look on my pictures I'm having problem with ccminer.
Searched a lot, but this is only topic with support.
There are many forks of ccminer by different developpers. You should address your questions to
the appropriate developper for the fork you are using. IIRC you were asking about krnlx, there is a
thread for that.
I'm running Ubuntu 16.04 with two Nvidia GTX 1060s. I've downloaded and installed the latest proprietary driver and CUDA 9. I've also downloaded and successfully compiled the cuda 9 branch of ccminer. The only problem is that once I've compiled it, I get the dreaded "Cuda error in func 'keccak256_cpu_init' at line 299 : unknown error." when I try to mine lyra2v2. Has anyone had any success in figuring this one out? Thanks!
Not sure if this helps...but...I went from intensity -i 22 to -i 23 and I had the same problem as well as saying I ran out of memory. I then returned back to intensity -22 and everything is running fine. Maybe someone has a better explanation of why this happens but try different intensity levels. Sorry I just realized this is for linux. but still intensity did create problems so maybe it happens under linus too...
I'm running Ubuntu 16.04 with two Nvidia GTX 1060s. I've downloaded and installed the latest proprietary driver and CUDA 9. I've also downloaded and successfully compiled the cuda 9 branch of ccminer. The only problem is that once I've compiled it, I get the dreaded "Cuda error in func 'keccak256_cpu_init' at line 299 : unknown error." when I try to mine lyra2v2. Has anyone had any success in figuring this one out? Thanks!
Quote
You do know this is for ccminer?
You'll be better off asking for help in their thread.
I did not understand, this topic is not for ccminer support?
If you look on my pictures I'm having problem with ccminer.
Searched a lot, but this is only topic with support.
I'm using ccminer 2.1 and I was using an intensity of -i 20. I changed it to -i 22 and I started getting 45 more hashes with my 5 1080 gtx's. so i went from 152 to 199... I'm going to try -i 23 and see how that works.
Hi Folks,
i´m running ccminer-x64-2.2.3-cuda9 on an 1060 6gb to mining electroneum with no problems.
I have an portable that is in work basically doing nothing and trying there the same ccminer version.
He have an 820m nvidia gpu that i think is cuda 2.1. Ofcourse when i try to use this verion i got this error:
https://ibb.co/hGMUFG
Any tip for what version should i use to use this graphic or if its possible to use it?
Regards,
i´m running ccminer-x64-2.2.3-cuda9 on an 1060 6gb to mining electroneum with no problems.
I have an portable that is in work basically doing nothing and trying there the same ccminer version.
He have an 820m nvidia gpu that i think is cuda 2.1. Ofcourse when i try to use this verion i got this error:
https://ibb.co/hGMUFG
Any tip for what version should i use to use this graphic or if its possible to use it?
Regards,
I'm mining ETN fine with CCminer 2.2.2 but when I try to mine MONA, I always get the same error from the start: Segmentation fault (core dumped)
Any idea what that might be?
Thanks!
Any idea what that might be?
Thanks!
at this level do it yourself in miner.h
Is there a limit of GPUs when using ccMiner ?
I have a rig with 18 GPUs and the last 2 are giving an error when starting ccMiner.
[2017-12-09 15:29:09] GPU #-26224: unable to query application clocks
[2017-12-09 15:29:09] GPU #21872: unable to query application clocks
I have a rig with 18 GPUs and the last 2 are giving an error when starting ccMiner.
[2017-12-09 15:29:09] GPU #-26224: unable to query application clocks
[2017-12-09 15:29:09] GPU #21872: unable to query application clocks
yes, 16 max, and less on windows i think due to drivers limitation
Can you raise the limit ? Windows 21 GPU here on one of my rigs.
many noobs this week 
too.. which often ask before searching
too.. which often ask before searching
Many questions seem to be from people using older cards not supported in the default compile.
Would a sm version check help prevent these problems?
Would a sm version check help prevent these problems?
Good Morning, someone can help-me?
I'm have 2x 1060 and 2 1070 using Simplemining.
I config the miner to use lyra2rev2, but don't work, get error.
Already checked my worker, and lines configuration a milion times.
Help-me?
I'm have 2x 1060 and 2 1070 using Simplemining.
I config the miner to use lyra2rev2, but don't work, get error.
Already checked my worker, and lines configuration a milion times.
Help-me?
Someone can help-me
You do know this is for ccminer?
You'll be better off asking for help in their thread.
Hi,
Looking for some help, getting the below error when starting the miner.
[2017-12-10 15:28:45] Starting on stratum+tcp://mona.poolmining.org:3092
[2017-12-10 15:28:45] 1 miner thread started, using 'lyra2v2' algorithm.
[2017-12-10 15:28:46] Stratum difficulty set to 15 (0.05859)
[2017-12-10 15:28:46] GPU #0: Intensity set to 20, 1048576 cuda threads
Cuda error in func 'keccak256_cpu_init' at line 299 : unknown error.
clay@LinuxBox:~/Downloads/ccminer-linux-x64-nvidia-cuda-8.0$
Thanks
Looking for some help, getting the below error when starting the miner.
[2017-12-10 15:28:45] Starting on stratum+tcp://mona.poolmining.org:3092
[2017-12-10 15:28:45] 1 miner thread started, using 'lyra2v2' algorithm.
[2017-12-10 15:28:46] Stratum difficulty set to 15 (0.05859)
[2017-12-10 15:28:46] GPU #0: Intensity set to 20, 1048576 cuda threads
Cuda error in func 'keccak256_cpu_init' at line 299 : unknown error.
clay@LinuxBox:~/Downloads/ccminer-linux-x64-nvidia-cuda-8.0$
Thanks
Good Morning, someone can help-me?
I'm have 2x 1060 and 2 1070 using Simplemining.
I config the miner to use lyra2rev2, but don't work, get error.
Already checked my worker, and lines configuration a milion times.
Help-me?
I'm have 2x 1060 and 2 1070 using Simplemining.
I config the miner to use lyra2rev2, but don't work, get error.
Already checked my worker, and lines configuration a milion times.
Help-me?
Someone can help-me
Jump to: