I have another question about staking. I understand that the CIF needs to be in a wallet for 30 days in order to mature, however, does this mean 30 days of continuous open wallet online connection, or just 30 days worth of time needs to pass before eligible for staking?
For instance, can I hold CIF, close the wallet and don't touch it for 30 days, then open it and be able to stake?
Thanks!
Topic: [ANN] CIF Blockchain | Launchpad | Education | cryptoimprovementfund.io - page 40. (Read 28179 times)
September 27, 2017, 09:34:48 AM
September 25, 2017, 09:09:31 AM
hello,dev,would the wallet have a update?
it can't update the Block,I create a cif.conf file to add the nodes,but it still can't link to the network
it can't update the Block,I create a cif.conf file to add the nodes,but it still can't link to the network
Hi Hdasd,
No update to the QT wallet - it is one of the most reliable wallets used today for custom blockchains. If your wallet isn't syncing after adding the nodes we might have to do a teamviewer to take a look. Please make sure there are no firewalls inhibiting the wallet as well. You could also try deleting the wallet and re-installing it (remember, if you have CIF do NOT delete the .dat file)..
September 25, 2017, 09:07:12 AM
Had the bounty was distribute?
Hey xcy,
Only the airdrop - bounty will be distributed at the end of the ICO campaign! You didn't miss out, don't worry!!
September 25, 2017, 03:24:37 AM
hello,dev,would the wallet have a update?
it can't update the Block,I create a cif.conf file to add the nodes,but it still can't link to the network
it can't update the Block,I create a cif.conf file to add the nodes,but it still can't link to the network
September 25, 2017, 02:47:31 AM
Had the bounty was distribute?
September 25, 2017, 02:16:31 AM
Hey Dev do I need to post the codes? I will edit if you dont want just reply. I think its my peers.
Code:
[
{
"addr" : "185.51.187.161:53621",
"services" : "00000001",
"lastsend" : 1506253286,
"lastrecv" : 1506253297,
"conntime" : 1506253251,
"version" : 60013,
"subver" : "/CryptoImprovementFund:1.6.0/",
"inbound" : false,
"startingheight" : 9520,
"banscore" : 0
},
{
"addr" : "195.3.157.53:53621",
"services" : "00000001",
"lastsend" : 1506253297,
"lastrecv" : 1506253298,
"conntime" : 1506253252,
"version" : 60013,
"subver" : "/CryptoImprovementFund:1.6.0/",
"inbound" : false,
"startingheight" : 9520,
"banscore" : 0
},
{
"addr" : "31.220.60.15:53621",
"services" : "00000000",
"lastsend" : 1506253315,
"lastrecv" : 1506253315,
"conntime" : 1506253315,
"version" : 0,
"subver" : "",
"inbound" : false,
"startingheight" : -1,
"banscore" : 0
}
]
{
"addr" : "185.51.187.161:53621",
"services" : "00000001",
"lastsend" : 1506253286,
"lastrecv" : 1506253297,
"conntime" : 1506253251,
"version" : 60013,
"subver" : "/CryptoImprovementFund:1.6.0/",
"inbound" : false,
"startingheight" : 9520,
"banscore" : 0
},
{
"addr" : "195.3.157.53:53621",
"services" : "00000001",
"lastsend" : 1506253297,
"lastrecv" : 1506253298,
"conntime" : 1506253252,
"version" : 60013,
"subver" : "/CryptoImprovementFund:1.6.0/",
"inbound" : false,
"startingheight" : 9520,
"banscore" : 0
},
{
"addr" : "31.220.60.15:53621",
"services" : "00000000",
"lastsend" : 1506253315,
"lastrecv" : 1506253315,
"conntime" : 1506253315,
"version" : 0,
"subver" : "",
"inbound" : false,
"startingheight" : -1,
"banscore" : 0
}
]
Hi Wancho, I think most wallets are connecting now due to the size of our network however I appreciate you listing the peers for any individuals that may still be having problems!
CIF
yeah my wallet already sync thanks guys.
September 24, 2017, 09:02:41 AM
Hey Dev do I need to post the codes? I will edit if you dont want just reply. I think its my peers.
Code:
[
{
"addr" : "185.51.187.161:53621",
"services" : "00000001",
"lastsend" : 1506253286,
"lastrecv" : 1506253297,
"conntime" : 1506253251,
"version" : 60013,
"subver" : "/CryptoImprovementFund:1.6.0/",
"inbound" : false,
"startingheight" : 9520,
"banscore" : 0
},
{
"addr" : "195.3.157.53:53621",
"services" : "00000001",
"lastsend" : 1506253297,
"lastrecv" : 1506253298,
"conntime" : 1506253252,
"version" : 60013,
"subver" : "/CryptoImprovementFund:1.6.0/",
"inbound" : false,
"startingheight" : 9520,
"banscore" : 0
},
{
"addr" : "31.220.60.15:53621",
"services" : "00000000",
"lastsend" : 1506253315,
"lastrecv" : 1506253315,
"conntime" : 1506253315,
"version" : 0,
"subver" : "",
"inbound" : false,
"startingheight" : -1,
"banscore" : 0
}
]
{
"addr" : "185.51.187.161:53621",
"services" : "00000001",
"lastsend" : 1506253286,
"lastrecv" : 1506253297,
"conntime" : 1506253251,
"version" : 60013,
"subver" : "/CryptoImprovementFund:1.6.0/",
"inbound" : false,
"startingheight" : 9520,
"banscore" : 0
},
{
"addr" : "195.3.157.53:53621",
"services" : "00000001",
"lastsend" : 1506253297,
"lastrecv" : 1506253298,
"conntime" : 1506253252,
"version" : 60013,
"subver" : "/CryptoImprovementFund:1.6.0/",
"inbound" : false,
"startingheight" : 9520,
"banscore" : 0
},
{
"addr" : "31.220.60.15:53621",
"services" : "00000000",
"lastsend" : 1506253315,
"lastrecv" : 1506253315,
"conntime" : 1506253315,
"version" : 0,
"subver" : "",
"inbound" : false,
"startingheight" : -1,
"banscore" : 0
}
]
Hi Wancho, I think most wallets are connecting now due to the size of our network however I appreciate you listing the peers for any individuals that may still be having problems!
CIF
September 24, 2017, 09:01:49 AM
Hey boys. does the windows web wallet no longer work?
Name and password goes and then comes white image
is it normal ?
Name and password goes and then comes white image
is it normal ?Hey Otsee - don't use the web wallet for now. The server it was sitting on is not SSL encrypted and it's causing a security risk. We'll advise when it's good to use again.
it has now everything worked with the windows wallet . 11 active connections . i have send the new win wallet adress for airdrop.
I hope it all works now. much success with the project.
pity.no airdrop received or forgotten?
the wallet runs perfectly . I do not know why nothing comeswhether I should send the address again by pm. I will not annoy the dev
Hi Otsee,
There was a form sent to all individuals who used the web wallet (35). I don't think I see a response from you - which could be why you never received a reimbursement. Please advise as to what your new wallet address is as well as the line # (CIF Tracker) we'll send out the reimbursement today. https://goo.gl/forms/HuX1TbQV38xPfZ682
September 24, 2017, 06:43:31 AM
Hey Dev do I need to post the codes? I will edit if you dont want just reply. I think its my peers.
Code:
[
{
"addr" : "185.51.187.161:53621",
"services" : "00000001",
"lastsend" : 1506253286,
"lastrecv" : 1506253297,
"conntime" : 1506253251,
"version" : 60013,
"subver" : "/CryptoImprovementFund:1.6.0/",
"inbound" : false,
"startingheight" : 9520,
"banscore" : 0
},
{
"addr" : "195.3.157.53:53621",
"services" : "00000001",
"lastsend" : 1506253297,
"lastrecv" : 1506253298,
"conntime" : 1506253252,
"version" : 60013,
"subver" : "/CryptoImprovementFund:1.6.0/",
"inbound" : false,
"startingheight" : 9520,
"banscore" : 0
},
{
"addr" : "31.220.60.15:53621",
"services" : "00000000",
"lastsend" : 1506253315,
"lastrecv" : 1506253315,
"conntime" : 1506253315,
"version" : 0,
"subver" : "",
"inbound" : false,
"startingheight" : -1,
"banscore" : 0
}
]
{
"addr" : "185.51.187.161:53621",
"services" : "00000001",
"lastsend" : 1506253286,
"lastrecv" : 1506253297,
"conntime" : 1506253251,
"version" : 60013,
"subver" : "/CryptoImprovementFund:1.6.0/",
"inbound" : false,
"startingheight" : 9520,
"banscore" : 0
},
{
"addr" : "195.3.157.53:53621",
"services" : "00000001",
"lastsend" : 1506253297,
"lastrecv" : 1506253298,
"conntime" : 1506253252,
"version" : 60013,
"subver" : "/CryptoImprovementFund:1.6.0/",
"inbound" : false,
"startingheight" : 9520,
"banscore" : 0
},
{
"addr" : "31.220.60.15:53621",
"services" : "00000000",
"lastsend" : 1506253315,
"lastrecv" : 1506253315,
"conntime" : 1506253315,
"version" : 0,
"subver" : "",
"inbound" : false,
"startingheight" : -1,
"banscore" : 0
}
]
September 24, 2017, 03:28:20 AM
Hey boys. does the windows web wallet no longer work?
Name and password goes and then comes white image is it normal ?
Name and password goes and then comes white image
is it normal ?Hey Otsee - don't use the web wallet for now. The server it was sitting on is not SSL encrypted and it's causing a security risk. We'll advise when it's good to use again.
it has now everything worked with the windows wallet . 11 active connections . i have send the new win wallet adress for airdrop.
I hope it all works now. much success with the project.
pity.no airdrop received or forgotten?
the wallet runs perfectly . I do not know why nothing comeswhether I should send the address again by pm. I will not annoy the dev
September 22, 2017, 09:06:00 AM
I get some "Bitcointalk.org image proxy: invalid image" errors in the original post of this thread (OP). Anybody else can confirm that problem?
Try again - see if you still have that issue?
The problem is solved. No idea what that was. All OP illustrations showing nicely again.
September 21, 2017, 04:03:03 PM
Hey boys. does the windows web wallet no longer work?
Name and password goes and then comes white image is it normal ?
Name and password goes and then comes white image
is it normal ?Hey Otsee - don't use the web wallet for now. The server it was sitting on is not SSL encrypted and it's causing a security risk. We'll advise when it's good to use again.
it has now everything worked with the windows wallet . 11 active connections . i have send the new win wallet adress for airdrop.
I hope it all works now. much success with the project.
September 21, 2017, 03:35:59 PM
FOR EVERYBODY THAT RUNS A LOCAL WALLET... HELP EACH OTHER!
Hello guys, as you've might have noticed some of us cannot fully synchronize the CIF Wallet. We had another audit of our source code yesterday by a 3th independant party. They found no problems.
So the reason why some cannot connect almost certainly is due to the fact that we are not actively trading yet. (hell, we didn't even started our ICO!), so we don't have 1000s of wallets online to synchronize off of each other. Some wallets just remain in a blind spot..
THEREFORE A REQUEST TO THE COMMUNITY...! GIVE US YOUR PEERS! IF YOU HAVE A FULLY SYNCHRONIZED WALLET, PLEASE REPLY TO US YOUR PEER IP ADDRESSES! You can do this as follows:
--> In the wallet... Menu Help - Debug Console.
--> A console opens. Type the following command:
getpeerinfo
--> This gives an output like this: "addr" : "31.220.60.15:53621",:
For people that have trouble connecting or synchronising the CIF wallet, please create CryptoImprovementFund.conf and add nodes...
On Windows, you will have to create this file if it doesn't exist yet:
%AppData%\CryptoImprovementFund\CryptoImprovementFund.conf, and also
%AppData%\CryptoImpr0ovementFund\cif.conf (I don't know which one it should be atm ;-) )
Contents of these files:
More nodes will be edited in here and here - so check back in a while to see if I added anything...
Thanks!
For CIF Ltd.,
twitter.com/devnullius
Newbie or noob question, It says my wallet is out sync. How to make it sync? Thanks, I'm just a newbie
Hello guys, as you've might have noticed some of us cannot fully synchronize the CIF Wallet. We had another audit of our source code yesterday by a 3th independant party. They found no problems.
So the reason why some cannot connect almost certainly is due to the fact that we are not actively trading yet. (hell, we didn't even started our ICO!), so we don't have 1000s of wallets online to synchronize off of each other. Some wallets just remain in a blind spot..
THEREFORE A REQUEST TO THE COMMUNITY...! GIVE US YOUR PEERS! IF YOU HAVE A FULLY SYNCHRONIZED WALLET, PLEASE REPLY TO US YOUR PEER IP ADDRESSES! You can do this as follows:
--> In the wallet... Menu Help - Debug Console.
--> A console opens. Type the following command:
getpeerinfo
--> This gives an output like this: "addr" : "31.220.60.15:53621",:
Code:
[
{
"addr" : "31.220.60.15:53621",
"services" : "00000001",
"lastsend" : 1505672487,
"lastrecv" : 1505672487,
"conntime" : 1505663169,
"version" : 60013,
"subver" : "/CryptoImprovementFund:1.6.0/",
"inbound" : false,
"startingheight" : 6839,
"banscore" : 0
},
{
"addr" : "[2001:0:9d38:953c:345b:979b:d1ee:6c43]:53621",
"services" : "00000001",
"lastsend" : 1505672515,
"lastrecv" : 1505672515,
"conntime" : 1505663250,
"version" : 60013,
"subver" : "/CryptoImprovementFund:1.6.0/",
"inbound" : false,
"startingheight" : 6839,
"banscore" : 0
}
]
{
"addr" : "31.220.60.15:53621",
"services" : "00000001",
"lastsend" : 1505672487,
"lastrecv" : 1505672487,
"conntime" : 1505663169,
"version" : 60013,
"subver" : "/CryptoImprovementFund:1.6.0/",
"inbound" : false,
"startingheight" : 6839,
"banscore" : 0
},
{
"addr" : "[2001:0:9d38:953c:345b:979b:d1ee:6c43]:53621",
"services" : "00000001",
"lastsend" : 1505672515,
"lastrecv" : 1505672515,
"conntime" : 1505663250,
"version" : 60013,
"subver" : "/CryptoImprovementFund:1.6.0/",
"inbound" : false,
"startingheight" : 6839,
"banscore" : 0
}
]
For people that have trouble connecting or synchronising the CIF wallet, please create CryptoImprovementFund.conf and add nodes...
On Windows, you will have to create this file if it doesn't exist yet:
%AppData%\CryptoImprovementFund\CryptoImprovementFund.conf, and also
Contents of these files:
Code:
addnode=174.138.22.6
addnode=31.220.60.15
addnode=46.147.193.168
addnode=185.51.187.161
addnode=100.11.237.78
addnode=195.3.157.53
addnode=195.3.157.53
addnode=31.220.60.15
addnode=95.139.249.172
addnode=76.169.57.92
addnode=174.138.22.6
addnode=76.169.57.92
addnode=31.220.60.15
addnode=46.147.193.168
addnode=185.51.187.161
addnode=100.11.237.78
addnode=195.3.157.53
addnode=195.3.157.53
addnode=31.220.60.15
addnode=95.139.249.172
addnode=76.169.57.92
addnode=174.138.22.6
addnode=76.169.57.92
More nodes will be edited in here and here - so check back in a while to see if I added anything...
Thanks!
For CIF Ltd.,
twitter.com/devnullius
September 21, 2017, 03:28:05 PM
Hey boys. does the windows web wallet no longer work?
Name and password goes and then comes white image is it normal ?
Huh? Name and password goes and then comes white image
is it normal ? September 21, 2017, 03:26:36 PM
I double tested:
%AppData%\CryptoImprovementFund redirects to C:\Users\UserName\AppData\Roaming\CryptoImprovementFund
If you put cif.conf in %AppData%\CryptoImprovementFund it should work - we hope that works : )
Your work-around is a fail-safe alternative way to get your wallet connected. I found it too complicated and prefered the cif.conf solution with adding some peers.
Thank you and glad at least it's working now : )
Devvie
I will try again using cif.conf solution. Meanwhile what is the command line option to run wallet application to use multiple peers. "CryptoImprovementFund-qt.exe -addnode=174.138.22.6 -addnode=31.220.60.15" command is picking first node only.
Make sure that you create cif.conf as a text file, and then save it as "all files".
Hi,
Here is the update :
I renamed cif.conf to CryptoImprovementFund.conf and it worked. Am I using updated version CryptoImprovementFund version 1.6.0.0 ?
Here is the output of getpeerinfo
I also added your .conf file name as an alternative - your correction actually would make sense, for I never get the peers IPs in my get peer info ;-)
My bad? ♥
Devvie
September 21, 2017, 03:24:28 PM
I get some "Bitcointalk.org image proxy: invalid image" errors in the original post of this thread (OP). Anybody else can confirm that problem?
No, all working here :/ September 21, 2017, 02:24:20 PM
Very interesting project!
I read on your medium page the following:
"In time, we might even add Masternodes as an income generating tool. We are currently exploring this option."
Could you tell us more about this, and also what we could reasonably expect for the minimum holding of CIF to run a masternode?
I read on your medium page the following:
"In time, we might even add Masternodes as an income generating tool. We are currently exploring this option."
Could you tell us more about this, and also what we could reasonably expect for the minimum holding of CIF to run a masternode?
Hey Heinrich,
Thanks for asking, great question. This is something we're going to roundtable before the first coin allocation Nov1 - we'll send out a PSA as we're not entirely sure on the specifics (minimums, costs etc). Right now we want to focus on getting this ICO running smooth and then we were going to look at that early October. If you're following us anywhere - you'll hear about it.
CIF
September 21, 2017, 12:34:12 PM
Very interesting project!
I read on your medium page the following:
"In time, we might even add Masternodes as an income generating tool. We are currently exploring this option."
Could you tell us more about this, and also what we could reasonably expect for the minimum holding of CIF to run a masternode?
I read on your medium page the following:
"In time, we might even add Masternodes as an income generating tool. We are currently exploring this option."
Could you tell us more about this, and also what we could reasonably expect for the minimum holding of CIF to run a masternode?
September 21, 2017, 12:25:35 PM
FOR EVERYBODY THAT RUNS A LOCAL WALLET... HELP EACH OTHER!
Hello guys, as you've might have noticed some of us cannot fully synchronize the CIF Wallet. We had another audit of our source code yesterday by a 3th independant party. They found no problems.
So the reason why some cannot connect almost certainly is due to the fact that we are not actively trading yet. (hell, we didn't even started our ICO!), so we don't have 1000s of wallets online to synchronize off of each other. Some wallets just remain in a blind spot..
THEREFORE A REQUEST TO THE COMMUNITY...! GIVE US YOUR PEERS! IF YOU HAVE A FULLY SYNCHRONIZED WALLET, PLEASE REPLY TO US YOUR PEER IP ADDRESSES! You can do this as follows:
--> In the wallet... Menu Help - Debug Console.
--> A console opens. Type the following command:
getpeerinfo
--> This gives an output like this: "addr" : "31.220.60.15:53621",:
Reply here with the IP addresses you get please. This way, we can let the network know where all the clients are and they can start synchronizing. Thank you!
For people that have trouble connecting or synchronising the CIF wallet, please create cif.conf and add nodes...
On Windows, you will have to create this file if it doesn't exist yet:
%AppData%\CryptoImprovementFund\cif.conf
Contents of this file:
More nodes will be edited in here - so check back in a while to see if I added anything...
Thanks!
For CIF Ltd.,
twitter.com/devnullius
YAY!!! Newbie or noob question, It says my wallet is out sync. How to make it sync? Thanks, I'm just a newbie
Hello guys, as you've might have noticed some of us cannot fully synchronize the CIF Wallet. We had another audit of our source code yesterday by a 3th independant party. They found no problems.
So the reason why some cannot connect almost certainly is due to the fact that we are not actively trading yet. (hell, we didn't even started our ICO!), so we don't have 1000s of wallets online to synchronize off of each other. Some wallets just remain in a blind spot..
THEREFORE A REQUEST TO THE COMMUNITY...! GIVE US YOUR PEERS! IF YOU HAVE A FULLY SYNCHRONIZED WALLET, PLEASE REPLY TO US YOUR PEER IP ADDRESSES! You can do this as follows:
--> In the wallet... Menu Help - Debug Console.
--> A console opens. Type the following command:
getpeerinfo
--> This gives an output like this: "addr" : "31.220.60.15:53621",:
Code:
[
{
"addr" : "31.220.60.15:53621",
"services" : "00000001",
"lastsend" : 1505672487,
"lastrecv" : 1505672487,
"conntime" : 1505663169,
"version" : 60013,
"subver" : "/CryptoImprovementFund:1.6.0/",
"inbound" : false,
"startingheight" : 6839,
"banscore" : 0
},
{
"addr" : "[2001:0:9d38:953c:345b:979b:d1ee:6c43]:53621",
"services" : "00000001",
"lastsend" : 1505672515,
"lastrecv" : 1505672515,
"conntime" : 1505663250,
"version" : 60013,
"subver" : "/CryptoImprovementFund:1.6.0/",
"inbound" : false,
"startingheight" : 6839,
"banscore" : 0
}
]
{
"addr" : "31.220.60.15:53621",
"services" : "00000001",
"lastsend" : 1505672487,
"lastrecv" : 1505672487,
"conntime" : 1505663169,
"version" : 60013,
"subver" : "/CryptoImprovementFund:1.6.0/",
"inbound" : false,
"startingheight" : 6839,
"banscore" : 0
},
{
"addr" : "[2001:0:9d38:953c:345b:979b:d1ee:6c43]:53621",
"services" : "00000001",
"lastsend" : 1505672515,
"lastrecv" : 1505672515,
"conntime" : 1505663250,
"version" : 60013,
"subver" : "/CryptoImprovementFund:1.6.0/",
"inbound" : false,
"startingheight" : 6839,
"banscore" : 0
}
]
Reply here with the IP addresses you get please. This way, we can let the network know where all the clients are and they can start synchronizing. Thank you!
For people that have trouble connecting or synchronising the CIF wallet, please create cif.conf and add nodes...
On Windows, you will have to create this file if it doesn't exist yet:
%AppData%\CryptoImprovementFund\cif.conf
Contents of this file:
Code:
addnode=174.138.22.6
addnode=31.220.60.15
addnode=46.147.193.168
addnode=185.51.187.161
addnode=100.11.237.78
addnode=195.3.157.53
addnode=195.3.157.53
addnode=31.220.60.15
addnode=95.139.249.172
addnode=76.169.57.92
addnode=31.220.60.15
addnode=46.147.193.168
addnode=185.51.187.161
addnode=100.11.237.78
addnode=195.3.157.53
addnode=195.3.157.53
addnode=31.220.60.15
addnode=95.139.249.172
addnode=76.169.57.92
More nodes will be edited in here - so check back in a while to see if I added anything...
Thanks!
For CIF Ltd.,
twitter.com/devnullius
I made it, wallet working well.
"addr" : "31.220.60.15:53621"
Thanks for the nice update
September 21, 2017, 12:02:51 PM
Holding few coins from past few days
Jump to: