[ANN] [CPR] | Copper Bars | Scrypt-Jane | GPU Efficiency JUST DROPPED - page 27.

minerapia

full member

Activity: 168

Merit: 100

cmon, i need some test data lol

If you guys are getting a lot of rejects on the P2Pool, don't forget about this:

stratum+tcp://94.237.84.48:9777
username = yourwallet
password = anything

stats at http://94.237.84.48:9777/static

You can set your share difficulty by adding +0.0000xxxx to your CPR address:

+0.000xxxx

Recommend share difficulty:

Hash Rate (KHash/s) Difficulty
1 +0.00000116
5 +0.00000582
10 +0.00001164
50 +0.00005821
100 +0.00011641
250 +0.00029103
500 +0.00058207
750 +0.00087310
1000 +0.00116414

minerapia

full member

Activity: 168

Merit: 100

had to restart the pool as it had small bug, At first its stale fest again but it get better after pool gets properly synced with DB etc...
Ill setup a testpool somewhere else and switch it over when Ill get proper settings done and tested.

everytime I chance parameters, I have to delete all old shares (because they arent valid with new settings), and after that pool seems to live in the past for a moment, some of shares it gets are 180s+ old etc... It just takes a lil time for it to recoup, I tried to shorten it abit.

edit: it should be safe now to turn some hashes to the p2pool now.

reb0rn21

legendary

Activity: 1901

Merit: 1024

from 3am to 7am http://cpr.coinmine.pl was down so mine miner switched to solo, from solo i got 1.3cpr, from pool i am getting 1cpr per ~3h so i can confirm pool works OK, also payment if set to 1 cpr works with no problem at all....

new p2pool need a lot more hashs power to take off... block time is still to fast, diff is up but still need to go up a lot to catch the network speed!

BTW: i have ~10Mh/s

minerapia

full member

Activity: 168

Merit: 100

Pool is back up, I removed very short block spread etc, cos those were for testing

Im off for now, if its broken dont mine Wink

Edit, pool looks pretty ok atm, there was alot of stales/doa shares when it started but looks better now.

TheSpiral

full member

Activity: 322

Merit: 113

Sinbad Mixer: Mix Your BTC Quickly

Quote from: r32godzilla on August 14, 2013, 05:50:03 AM

What sort of setups and KH/s you guys have for mining? I'm on an AMD Opteron Dual CPU 8 cores VPS and getting about 190 KH/s.

i5-3570k get about 250k on stock clocks. 7850 getting about 990k at 16 intensity.

r32godzilla

hero member

Activity: 1360

Merit: 506

What sort of setups and KH/s you guys have for mining? I'm on an AMD Opteron Dual CPU 8 cores VPS and getting about 190 KH/s.

TheSpiral

full member

Activity: 322

Merit: 113

Sinbad Mixer: Mix Your BTC Quickly

Quote from: minerapia on August 14, 2013, 04:43:24 AM

Now, Finally I see some transactions !

Yep. Starting to get payments now.
EDIT: Pool seems to messed up again, back to insane rejects and disconnects.

minerapia

full member

Activity: 168

Merit: 100

Now, Finally I see some transactions !

minerapia

full member

Activity: 168

Merit: 100

Im working on it, just that the log/debug options are quite non-existent.
Ok problem is that pool software rejects blocks submited to it even tho they are valid (or supposed to be, and added to webpages).
Seems that copperbarsd rejects those blocks because they dont match nBits (difficulty).

iGotSpots

legendary

Activity: 2548

Merit: 1054

CPU Web Mining 🕸️ on webmining.io

No payouts, yet. I'm gonna leave a rig on it overnight and hope it works.

I just hope I don't lose another 40+ Bars like I did last night with that shitty coinmine pool

iGotSpots

legendary

Activity: 2548

Merit: 1054

CPU Web Mining 🕸️ on webmining.io

Quote from: TheSpiral on August 14, 2013, 03:40:11 AM

Alright, think it restarted and it's working now. Good deal. The addon difficulty working too.

Yes, a million times better now. Payouts working?

TheSpiral

full member

Activity: 322

Merit: 113

Sinbad Mixer: Mix Your BTC Quickly

Alright, think it restarted and it's working now. Good deal. The addon difficulty working too.

minerapia

full member

Activity: 168

Merit: 100

Quote from: TheSpiral on August 14, 2013, 03:25:17 AM

Quote from: iGotSpots on August 14, 2013, 03:22:58 AM

Quote from: TheSpiral on August 14, 2013, 03:20:26 AM

Quote from: iGotSpots on August 14, 2013, 03:18:17 AM

Quote from: TheSpiral on August 14, 2013, 03:15:50 AM

Quote from: iGotSpots on August 14, 2013, 03:11:31 AM

Lots of rejects. Messing with miner settings to see if it's on my end. Nothing seems to be helping yet though. Way more than I was getting earlier

Same. Possibly the non-changeable 15 difficulty shares?

Use the chart I posted a few pages back. Add it after your address in your .bat and it will reduce the reject immensely

Tried every single one on the list. Still at about 9% accepts.

Yea don't worry about matching the numbers exactly. Its just a guideline for scrypt this is scrypt-jane. Try going higher .0044826 is working well for me. You just gotta find the right number for your setup

I'm aware of how it works, I'm saying they don't work.

Try using something obscure like +0.1 +1 +10 etc... I had to change some of the numbers around, maybe I broke this one meanwhile. Atm atleast someone is on min diff shares.

iGotSpots

legendary

Activity: 2548

Merit: 1054

CPU Web Mining 🕸️ on webmining.io

The pool efficiency is increasing, too. I think in a few hours it will be running smoothly. Haven't gotten a payout yet though

iGotSpots

legendary

Activity: 2548

Merit: 1054

CPU Web Mining 🕸️ on webmining.io

Quote from: TheSpiral on August 14, 2013, 03:25:17 AM

Quote from: iGotSpots on August 14, 2013, 03:22:58 AM

Quote from: TheSpiral on August 14, 2013, 03:20:26 AM

Quote from: iGotSpots on August 14, 2013, 03:18:17 AM

Quote from: TheSpiral on August 14, 2013, 03:15:50 AM

Quote from: iGotSpots on August 14, 2013, 03:11:31 AM

Lots of rejects. Messing with miner settings to see if it's on my end. Nothing seems to be helping yet though. Way more than I was getting earlier

Same. Possibly the non-changeable 15 difficulty shares?

Use the chart I posted a few pages back. Add it after your address in your .bat and it will reduce the reject immensely

Tried every single one on the list. Still at about 9% accepts.

Yea don't worry about matching the numbers exactly. Its just a guideline for scrypt this is scrypt-jane. Try going higher .0044826 is working well for me. You just gotta find the right number for your setup

I'm aware of how it works, I'm saying they don't work.

I don't know then. Seems to be working for me

iGotSpots

legendary

Activity: 2548

Merit: 1054

CPU Web Mining 🕸️ on webmining.io

Quote from: minerapia on August 14, 2013, 03:25:01 AM

hmm some of the shares have age of 160 secs etc... Ill give it some time if it recoups.
we should have found 2 blocks atm.

Yea just let it catch up. I'll leave one on it overnight and report in the morning

TheSpiral

full member

Activity: 322

Merit: 113

Sinbad Mixer: Mix Your BTC Quickly

Quote from: iGotSpots on August 14, 2013, 03:22:58 AM

Quote from: TheSpiral on August 14, 2013, 03:20:26 AM

Quote from: iGotSpots on August 14, 2013, 03:18:17 AM

Quote from: TheSpiral on August 14, 2013, 03:15:50 AM

Quote from: iGotSpots on August 14, 2013, 03:11:31 AM

Lots of rejects. Messing with miner settings to see if it's on my end. Nothing seems to be helping yet though. Way more than I was getting earlier

Same. Possibly the non-changeable 15 difficulty shares?

Use the chart I posted a few pages back. Add it after your address in your .bat and it will reduce the reject immensely

Tried every single one on the list. Still at about 9% accepts.

Yea don't worry about matching the numbers exactly. Its just a guideline for scrypt this is scrypt-jane. Try going higher .0044826 is working well for me. You just gotta find the right number for your setup

I'm aware of how it works, I'm saying they don't work.

minerapia

full member

Activity: 168

Merit: 100

hmm some of the shares have age of 160 secs etc... Ill give it some time if it recoups. Like it would try to read old (non-existent) shares.
we should have found 2 blocks atm.

iGotSpots

legendary

Activity: 2548

Merit: 1054

CPU Web Mining 🕸️ on webmining.io

Quote from: TheSpiral on August 14, 2013, 03:20:26 AM

Quote from: iGotSpots on August 14, 2013, 03:18:17 AM

Quote from: TheSpiral on August 14, 2013, 03:15:50 AM

Quote from: iGotSpots on August 14, 2013, 03:11:31 AM

Lots of rejects. Messing with miner settings to see if it's on my end. Nothing seems to be helping yet though. Way more than I was getting earlier

Same. Possibly the non-changeable 15 difficulty shares?

Use the chart I posted a few pages back. Add it after your address in your .bat and it will reduce the reject immensely

Tried every single one on the list. Still at about 9% accepts.

Yea don't worry about matching the numbers exactly. Its just a guideline for scrypt this is scrypt-jane. Try going higher .0044826 is working well for me. You just gotta find the right number for your setup

TheSpiral

full member

Activity: 322

Merit: 113

Sinbad Mixer: Mix Your BTC Quickly

Quote from: iGotSpots on August 14, 2013, 03:18:17 AM

Quote from: TheSpiral on August 14, 2013, 03:15:50 AM

Quote from: iGotSpots on August 14, 2013, 03:11:31 AM

Lots of rejects. Messing with miner settings to see if it's on my end. Nothing seems to be helping yet though. Way more than I was getting earlier

Same. Possibly the non-changeable 15 difficulty shares?

Use the chart I posted a few pages back. Add it after your address in your .bat and it will reduce the reject immensely

Tried every single one on the list. Still at about 9% accepts, 2 rejects per second.

Topic: [ANN] [CPR] | Copper Bars | Scrypt-Jane | GPU Efficiency JUST DROPPED - page 27. (Read 77814 times)