Topic: [ANN] [CPR] | Copper Bars | Scrypt-Jane | GPU Efficiency JUST DROPPED - page 24. (Read 77768 times)
August 16, 2013, 01:01:45 AM
Using CLjdiMGDjnDKkMExHtfH7qZruhjkoqHefB now, no payouts yet
August 16, 2013, 12:57:16 AM
In p2pool its different to diff for work to get accepted and to actual share. your own diff is prolly too low (remember the +0.xxx)
55.4k share, 11k share, etc. Did just get a payout for a whopping 0.0001 lol :p
Oh, to clarify, I found the block just before the payment, not sure if that was a block finder reward or a share payout.
August 16, 2013, 12:55:26 AM
In p2pool its different to diff for work to get accepted and to actual share. your own diff is prolly too low (remember the +0.xxx)
August 16, 2013, 12:54:58 AM
August 16, 2013, 12:53:49 AM
ok, I should have now fixed everything, just need someone to test (unfortunatly cant confirm anything until block is found).
p2pool: http://94.237.84.48:9777
and remember to put +0.xxxx
https://bitcointalksearch.org/topic/m.2934284
p2pool: http://94.237.84.48:9777
and remember to put +0.xxxx
https://bitcointalksearch.org/topic/m.2934284
On it
August 16, 2013, 12:53:35 AM
ok, I should have now fixed everything, just need someone to test (unfortunatly cant confirm anything until block is found).
p2pool: http://94.237.84.48:9777
Well....p2pool: http://94.237.84.48:9777
I can't see myself under payouts (CXe9Y7ga8ax7bXcCRZc6SoHHE9W65eYRjB).
182 accepts, 113 rejects.
Also, once you get it working, could you post the code on github? I've been trying to get one running myself (managed to get a couple coins working, no luck with this one)
August 16, 2013, 12:50:33 AM
ok, I should have now fixed everything, just need someone to test (unfortunatly cant confirm anything until block is found).
p2pool: http://94.237.84.48:9777
Sent a few m/h your way. p2pool: http://94.237.84.48:9777
August 16, 2013, 12:41:47 AM
ok, I should have now fixed everything, just need someone to test (unfortunatly cant confirm anything until block is found).
p2pool: http://94.237.84.48:9777
and remember to put +0.xxxx
https://bitcointalksearch.org/topic/m.2934284
p2pool: http://94.237.84.48:9777
and remember to put +0.xxxx
https://bitcointalksearch.org/topic/m.2934284
August 15, 2013, 08:21:02 PM
does a CPU with 80.000 to 130.000 hashes stand a chance for solo mining?
Yes, i'm mining with that hashrate too, but not using up the whole cpu though. August 15, 2013, 07:54:13 PM
does a CPU with 80.000 to 130.000 hashes stand a chance for solo mining?
Yea. Diff is .2 and blocks are every few seconds still
August 15, 2013, 07:37:40 PM
does a CPU with 80.000 to 130.000 hashes stand a chance for solo mining?
use the pool
August 15, 2013, 07:31:30 PM
does a CPU with 80.000 to 130.000 hashes stand a chance for solo mining?
August 15, 2013, 04:06:10 PM
or anyone tbh. I would prefer something near or under 1Mhs thanks
never mind, I prolly located the bug. I added like 50 debug prints all over, one catched something.
Im one step smarter again, maybe tomorrow will be the grand opening lol.
August 15, 2013, 03:27:33 PM
My 6970s are working better than my 7950s for Copper Bars. That's weird...
August 15, 2013, 03:21:47 PM
6970 is faster here
August 15, 2013, 03:13:48 PM
Anyone got a good setting for a 7950? got 2m/h with: --thread-concurrency 8192 -I 18 -g 2 -w 256 --lookup-gap 2. 1150core 1250mem
Saw igotspots got 2400k/h with 6970's so i think a 7950 should get more
Saw igotspots got 2400k/h with 6970's so i think a 7950 should get more
August 15, 2013, 11:17:02 AM
to mine you just can combine pool mining and solo so if pool fail you will switch to solo like this:
coperbar -o http://cpr.coinmine.pl:7060 -u user -p x -o http://rpcip:port -u user -p x --scrypt -I 18 -w 256 -s 1 --thread-concurrency 4032 --gpu-threads 1 --lookup-gap 2 --expiry 5 --queue 0
this setting is for 7950 but it should be the same for any other card, i tried changing tread concurrency bit it did`t help
atm diff got a bit up so solo is possible but for me pool is better while is online
coperbar -o http://cpr.coinmine.pl:7060 -u user -p x -o http://rpcip:port -u user -p x --scrypt -I 18 -w 256 -s 1 --thread-concurrency 4032 --gpu-threads 1 --lookup-gap 2 --expiry 5 --queue 0
this setting is for 7950 but it should be the same for any other card, i tried changing tread concurrency bit it did`t help
atm diff got a bit up so solo is possible but for me pool is better while is online
August 15, 2013, 09:51:17 AM
what program do i have to use to mine in the pool?
heres gpu minerhttps://bitcointalksearch.org/topic/annyac-yacminer-gpu-miner-for-yacoin-247782
I would prefer to mine with CPU, do I have a chance with a 2600k?
What program should I use?
http://yacointalk.com/index.php?topic=264.0
https://bitcointalksearch.org/topic/yacoin-windows-7-x64-ssse3-and-avx-support-x86-miner-201027
August 15, 2013, 07:47:27 AM
"vardiff" works, remember to add +0.xxxx according to your has rate to minimize stales.
And down again, power plug was loose and whole comp restarted as i aproached it, blockchain was in ram (and I didnt backup it yet) so i have to redownload it ffs.
August 15, 2013, 07:34:08 AM
Could you give your settings Igotspots? cant get over 2mh with 7950 :/
Jump to: