Author

Topic: [ANN] [CPU mining] Yenten v2.0.1 [YTN] [YescryptR16] [Exchange avilable] - page 159. (Read 147137 times)

sr. member
Activity: 356
Merit: 259
airdrop-pepe.art
I sent .003 btc from coinsmarkets to coinbase and only .0015 showed up.  The .0015 posted today should I keep waiting for the other half or should I contact coinbase or coinsmarkets?

Withdrawal fees of coinsmarkets perhaps ? I dont use bitcoin anymore since few month, doge and litecoin are better, and litecoin is accepted by coinbase
member
Activity: 322
Merit: 54
Consensus is Constitution
I sent .003 btc from coinsmarkets to coinbase and only .0015 showed up.  The .0015 posted today should I keep waiting for the other half or should I contact coinbase or coinsmarkets?
member
Activity: 322
Merit: 54
Consensus is Constitution
Looks like a bitcoin whale got wind of yenten and they are buying up all the supply in order to do a pump and dump.  Hot potato time.
full member
Activity: 539
Merit: 105
IDENA.IO - Proof-Of-Person Blockchain
Coinsmarket is very bad exchange, are there any plans to add Tenten to other exchange? I feel unsure about mining because of exchange. Good legitimate project = usually at least a decent exchange (like coinexchange.io)...

This is not true.

1. Yenten doesn’t need a bigger exchange to grow. We can reach $10k volume without Bittrex.
2. Coinsmarkets is not a “very bad exchange”. Have you tried depositing btc and buying YTN? What’s the problem? If you need help then ask for help.
3. Traders on other exchanges will wish they were on Coinsmarkets for this stage of the project. Their loss.
4. Any exchange can add Yenten. They do not need permission. If you want an exchange to add Yenten then go talk to the exchange. We don’t run coinexchange.
5. Coinexchange is for kids and girls. Tell me this: if coinexchange is so good, why don’t they have Yenten listed??

Lol true ..
Make sure that selling price set to .000005btc to .000008 btc in coming week.. increase to .000012 next week .with 50% hike every week..don't sell below...
  get a bull run .. other exchanges will automatically list 😁
member
Activity: 152
Merit: 10
Coinsmarket is very bad exchange, are there any plans to add Tenten to other exchange? I feel unsure about mining because of exchange. Good legitimate project = usually at least a decent exchange (like coinexchange.io)...

Your statement is not true.

1. Yenten doesn’t need a bigger exchange to grow. We can reach $10k volume without Bittrex.
2. Coinsmarkets is not a “very bad exchange”. Have you tried depositing btc and buying YTN? What’s the problem? If you need help then ask for help.
3. Traders on other exchanges will wish they were on Coinsmarkets for this stage of the project. Their loss.
4. Any exchange can add Yenten. They do not need permission. If you want an exchange to add Yenten then go talk to the exchange. We don’t run coinexchange. Nobody here runs Yenten, for that matter.
5. Coinexchange is for kids and girls. Tell me this: if coinexchange is so good, why don’t they have Yenten listed??
newbie
Activity: 22
Merit: 0
Hey guys I am using the yenten minerd. I let it mine at the night but I didn't get anything. How long does it take to find a block?

I do
Quote
minerd -a yescryptr16 -o localhost:8640 -u ** -p ** --coinbase-addr=*

I have I7 4790k
full member
Activity: 154
Merit: 100
Coinsmarket is very bad exchange, are there any plans to add Tenten to other exchange? I feel unsure about mining because of exchange. Good legitimate project = usually at least a decent exchange (like coinexchange.io)...
newbie
Activity: 64
Merit: 0
I was using Yenten Miner and now i try cpuminer-opt 3.7.5, what of those i should use if i got i7-4790k? atm i use avx2 with -t8 command,  any tips?

Edit, it seems i get more with t8 vs t4, did see that ppl say use only max cores, in my case4 but im still gettin more with t8.

using avx2 and 8 threads are the best for me

Thanks for reply.
member
Activity: 312
Merit: 10
I was using Yenten Miner and now i try cpuminer-opt 3.7.5, what of those i should use if i got i7-4790k? atm i use avx2 with -t8 command,  any tips?

Edit, it seems i get more with t8 vs t4, did see that ppl say use only max cores, in my case4 but im still gettin more with t8.

using avx2 and 8 threads are the best for me
newbie
Activity: 64
Merit: 0
I was using Yenten Miner and now i try cpuminer-opt 3.7.5, what of those i should use if i got i7-4790k? atm i use avx2 with -t8 command,  any tips?

Edit, it seems i get more with t8 vs t4, did see that ppl say use only max cores, in my case4 but im still gettin more with t8.
member
Activity: 152
Merit: 10
Someone is mining this coin with AMD RYZEN gives some feedback, thank you.

I just started mining with ryzen 1700 cpuminer 3.7.5

how much coins do you mining one day , i also have this cpu ,but i didn't know RIO ,i dont't want to hurt my cpu .
You can safely load cpu to 100 percentage.

I get about 1150 h/s. Should I bother solo mining or is difficulty too high?

Depends on how long you will be mining this coin. If a week or longer, then i think solo is still fine.

But at some point you’ll want to join a pool because you’ll only be mining 1,000 yentoshi a day and it will take a month to hit a solo block.
newbie
Activity: 64
Merit: 0
Have anyone test difference about miners?

Im using atm "offical" yenten miner and was thinking do i lose something or is speed/profit same?
member
Activity: 460
Merit: 12
I installed cpuminer-opt-3.7.4, same version on my main pc that I have been mining, on one of my dual E5-2660 v1 open compute nodes and it hashed at about ~630 H/s on 16 cores.

I'm kind of disappointed in that hash rate, given my dual E5-2667 V3 es pc hashes at about 5 times, 2700-2800 H/s, that rate with the same number of cores and only a couple hundred mhz faster in speed.

 Also the E5-2667 V3 cpu's are engineering samples with a max all core turbo of 3.0 gh/z and 35 MB of L2 cache each vs a max all core turbo of 2.8 gh/z and 20 MB of L3 on the 2660 v1 cpu's but since I tried the same number of cores to mine with , 16 cores, L3 size should not matter.

I know the v3's are faster by about ~20-25 percent over the v1's just because of improvements in the newer architecture but I really was expecting at least twice the performance i'm getting on the 2660 cpu's.

So i'll tinker with it some more.

Also see a newer version of cpuminer-opt is out.


This algo is strange, I get about the same hashrate with an i3 vs. an i5 laptop (same architecture) and my new Ryzen 7 1700 only gets about 4x the hashrate of these computers. With other CPU and cryptonight coins the Ryzen 7 is about 10x faster.
full member
Activity: 184
Merit: 103
I installed cpuminer-opt-3.7.4, same version on my main pc that I have been mining, on one of my dual E5-2660 v1 open compute nodes and it hashed at about ~630 H/s on 16 cores.

I'm kind of disappointed in that hash rate, given my dual E5-2667 V3 es pc hashes at about 5 times, 2700-2800 H/s, that rate with the same number of cores and only a couple hundred mhz faster in speed.

 Also the E5-2667 V3 cpu's are engineering samples with a max all core turbo of 3.0 gh/z and 35 MB of L2 cache each vs a max all core turbo of 2.8 gh/z and 20 MB of L3 on the 2660 v1 cpu's but since I tried the same number of cores to mine with , 16 cores, L3 size should not matter.

I know the v3's are faster by about ~20-25 percent over the v1's just because of improvements in the newer architecture but I really was expecting at least twice the performance i'm getting on the 2660 cpu's.

So i'll tinker with it some more.

Also see a newer version of cpuminer-opt is out.
newbie
Activity: 13
Merit: 0
Someone is mining this coin with AMD RYZEN gives some feedback, thank you.

I just started mining with ryzen 1700 cpuminer 3.7.5

how much coins do you mining one day , i also have this cpu ,but i didn't know RIO ,i dont't want to hurt my cpu .
You can safely load cpu to 100 percentage.

I get about 1150 h/s. Should I bother solo mining or is difficulty too high?
full member
Activity: 539
Merit: 105
IDENA.IO - Proof-Of-Person Blockchain
The big players are not mining Yenten lucky..so it's good for us.

Some investers buy from market systematically.. right now it's 2.5cents I suppose. Even if it goes 5cents you made 100 percent profit.

If you invest 100 dollar then you get 4000coin.if price goes to5cent per coin .. sell 2000 coin and keep 2k coin and you got back 100dollar.😉 .
full member
Activity: 539
Merit: 105
IDENA.IO - Proof-Of-Person Blockchain
Someone is mining this coin with AMD RYZEN gives some feedback, thank you.

I just started mining with ryzen 1700 cpuminer 3.7.5

how much coins do you mining one day , i also have this cpu ,but i didn't know RIO ,i dont't want to hurt my cpu .
You can safely load cpu to 100 percentage.
full member
Activity: 490
Merit: 100
Someone is mining this coin with AMD RYZEN gives some feedback, thank you.

I just started mining with ryzen 1700 cpuminer 3.7.5

how much coins do you mining one day , i also have this cpu ,but i didn't know RIO ,i dont't want to hurt my cpu .
newbie
Activity: 13
Merit: 0
Someone is mining this coin with AMD RYZEN gives some feedback, thank you.

I just started mining with ryzen 1700 cpuminer 3.7.5
member
Activity: 68
Merit: 10
Almost mined 100 coins with an intel nuc i3 :-)


Cool! How many days?

Almost 2 weeks but only mining at night. Hash is around 230 H/s with 3 cores. With a decent cpu you can get 700 / 800 H/s.
I also buy coins so mining is more for fun :-)
Jump to: