Author

Topic: [ANN] [CPU mining] Yenten v2.0.1 [YTN] [YescryptR16] [Exchange avilable] - page 163. (Read 147137 times)

member
Activity: 322
Merit: 54
Consensus is Constitution
Dev please look over my post about adding wallet funcionality so people can encode a crowd-sourced exchange into the blockchain using op_return.  The full text of my whitepaper is included in the comments on the forum post

https://bitcointalksearch.org/topic/m.25870369
member
Activity: 152
Merit: 10
i’m still solo mining. anyone else?

discord: https://discord.gg/MW6aPzb
member
Activity: 322
Merit: 54
Consensus is Constitution
Finally got my Odroid XU3 lite mining by compiling yentend, wasn't able to compile cpuminer-opt. Is the source of minerd available somewhere?
Mining on 7 of 8 cores at 93°C, Hashrate reports vary wildly: most often it's around 63 but rarely it's reported as 0 or up to 140, probably some kind of lag. Not too bad for an ARM CPU (Exynos 5422), OS is Debian Wheezy. My properly cooled and slightly overclocked FX 8320E does 650 hashes per second btw.

Had to configure with --ignore-incompatible-bdb and remove a "-msse41" from yescrypt.h in src/hash/yescrypt. More could be possible with some ARM optimization and compile option tuning, my only CXXFLAG was O3.

Too bad the hashrate almost doubled today.  Shocked

Wow nice, I tried to get it working on a pine64 which didn't work and it seemed to be missing x86 type operations so I assumed that yenten required x86 processors.  But that is interesting that you got it to work on ARM and not only that but on a non-ubuntu distro.  Would you mind writing up a little procedure on how to do it for a linux noob?  If this works on ARM it changes everything...

Also add up each core's hash/sec to get your total.
full member
Activity: 184
Merit: 103
So far so good!

[2017-12-05 21:04:40] Accepted 88/88 (100%), 133.42 kH, 2654.32 H/s, 62C
[2017-12-05 21:04:46] CPU #12: 2602 H, 170.98 H/s
[2017-12-05 21:04:46] Accepted 89/89 (100%), 127.06 kH, 2656.66 H/s, 61C

how to show the degree? my cpu opt can't show degree info


It just does, I did not do anything special.

Downloaded the source and compiled then ran the miner, no tweaks or anything and just used build.sh then make then ran it. So thats a question for the dev.

Only one invalid share overnight.

[2017-12-06 06:14:41] Accepted 1386/1387 (99.9%), 50.66 kH, 2753.15 H/s, 59C
[2017-12-06 06:14:43] CPU #9: 3752 H, 172.03 H/s
[2017-12-06 06:14:43] CPU #6: 3746 H, 171.77 H/s
[2017-12-06 06:14:43] CPU #15: 3754 H, 172.12 H/s
[2017-12-06 06:14:43] CPU #14: 3760 H, 172.39 H/s
[2017-12-06 06:14:43] CPU #8: 3716 H, 170.35 H/s
[2017-12-06 06:14:43] CPU #4: 3756 H, 172.19 H/s
[2017-12-06 06:14:43] CPU #0: 3744 H, 171.64 H/s
[2017-12-06 06:14:43] CPU #3: 3754 H, 172.09 H/s
[2017-12-06 06:14:43] CPU #2: 3763 H, 172.50 H/s
[2017-12-06 06:14:43] CPU #5: 3757 H, 172.21 H/s
[2017-12-06 06:14:43] CPU #7: 306 H, 172.39 H/s
[2017-12-06 06:14:43] CPU #1: 3759 H, 172.31 H/s
[2017-12-06 06:14:43] CPU #13: 3763 H, 172.49 H/s
[2017-12-06 06:14:43] CPU #10: 3758 H, 172.26 H/s
[2017-12-06 06:14:43] CPU #12: 3763 H, 172.49 H/s
[2017-12-06 06:14:43] CPU #11: 3763 H, 172.49 H/s
[2017-12-06 06:14:47] CPU #7: 829 H, 171.94 H/s
[2017-12-06 06:14:48] Accepted 1387/1388 (99.9%), 57.14 kH, 2753.26 H/s, 58C
[2017-12-06 06:14:50] yescryptr16 block 27393, diff 0.010

Now to solomine with 16 threads at the same time I pool mine to see what happens. Grin


06:17:11

{
"blocks" : 27393,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 0.00994770,
"errors" : "",
"genproclimit" : 16,
"networkhashps" : 298548,
"pooledtx" : 0,
"testnet" : false,
"generate" : true,
"hashespersec" : 1242
}


full member
Activity: 184
Merit: 103
So far so good!

[2017-12-05 21:04:40] Accepted 88/88 (100%), 133.42 kH, 2654.32 H/s, 62C
[2017-12-05 21:04:46] CPU #12: 2602 H, 170.98 H/s
[2017-12-05 21:04:46] Accepted 89/89 (100%), 127.06 kH, 2656.66 H/s, 61C


So you are on which pool now.

http://antminepool.com
member
Activity: 312
Merit: 10
So far so good!

[2017-12-05 21:04:40] Accepted 88/88 (100%), 133.42 kH, 2654.32 H/s, 62C
[2017-12-05 21:04:46] CPU #12: 2602 H, 170.98 H/s
[2017-12-05 21:04:46] Accepted 89/89 (100%), 127.06 kH, 2656.66 H/s, 61C

how to show the degree? my cpu opt can't show degree info
member
Activity: 83
Merit: 10
Soon we will all be dead
guys, is this any good?

"blocks" : 25507,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 0.01162384,
"errors" : "",
"genproclimit" : -6,
"networkhashps" : 383851,
"pooledtx" : 0,
"testnet" : false,
"generate" : true,
"hashespersec" : 527
}



Yes very good, what is your processor?

intel core i7-2860QM from some years ago
newbie
Activity: 34
Merit: 0
Bitzeny goes up. Difficulty increases. Some miners peel off to yenten mining.

Hold onto your hats.

Still hope this coin will stay under the radar for quit some time. Mining is still easy :-)

I would expect that the Yenten price is going to follow Bitzeny at a certain moment. Anyway wonder why the old lady (Bitzeny) is suddenly rising so fast.


I had the same thoughts. Bitzeny's main exchange has crashed so many times. Reminds me of cryptopia few months ago.
full member
Activity: 160
Merit: 100
Bitzeny goes up. Difficulty increases. Some miners peel off to yenten mining.

Hold onto your hats.

Still hope this coin will stay under the radar for quit some time. Mining is still easy :-)

I would expect that the Yenten price is going to follow Bitzeny at a certain moment. Anyway wonder why the old lady (Bitzeny) is suddenly rising so fast.
full member
Activity: 539
Merit: 105
IDENA.IO - Proof-Of-Person Blockchain
So far so good!

[2017-12-05 21:04:40] Accepted 88/88 (100%), 133.42 kH, 2654.32 H/s, 62C
[2017-12-05 21:04:46] CPU #12: 2602 H, 170.98 H/s
[2017-12-05 21:04:46] Accepted 89/89 (100%), 127.06 kH, 2656.66 H/s, 61C


So you are on which pool now.
full member
Activity: 184
Merit: 103
So far so good!

[2017-12-05 21:04:40] Accepted 88/88 (100%), 133.42 kH, 2654.32 H/s, 62C
[2017-12-05 21:04:46] CPU #12: 2602 H, 170.98 H/s
[2017-12-05 21:04:46] Accepted 89/89 (100%), 127.06 kH, 2656.66 H/s, 61C
full member
Activity: 184
Merit: 103
Much better. Grin

[2017-12-05 19:44:03] CPU #24: 4152 H, 87.21 H/s
[2017-12-05 19:44:03] CPU #23: 4188 H, 87.95 H/s
[2017-12-05 19:44:03] CPU #0: 4201 H, 88.23 H/s
[2017-12-05 19:44:03] CPU #17: 4231 H, 88.85 H/s
[2017-12-05 19:44:03] CPU #3: 4205 H, 88.31 H/s
[2017-12-05 19:44:03] CPU #18: 4342 H, 91.20 H/s
[2017-12-05 19:44:03] CPU #2: 3432 H, 72.09 H/s
[2017-12-05 19:44:03] CPU #22: 4136 H, 86.86 H/s
[2017-12-05 19:44:03] CPU #25: 3997 H, 83.94 H/s
[2017-12-05 19:44:03] CPU #5: 4183 H, 87.86 H/s
[2017-12-05 19:44:03] CPU #16: 4137 H, 86.89 H/s
[2017-12-05 19:44:03] CPU #6: 4174 H, 87.65 H/s
[2017-12-05 19:44:03] CPU #4: 1603 H, 86.72 H/s
[2017-12-05 19:44:03] CPU #20: 4191 H, 88.02 H/s
[2017-12-05 19:44:03] CPU #21: 4187 H, 87.94 H/s
[2017-12-05 19:44:03] CPU #19: 4138 H, 86.91 H/s
[2017-12-05 19:44:03] CPU #1: 3902 H, 81.93 H/s
[2017-12-05 19:44:03] CPU #7: 4013 H, 84.27 H/s
[2017-12-05 19:44:03] CPU #10: 4155 H, 87.25 H/s
[2017-12-05 19:44:03] CPU #12: 4155 H, 87.25 H/s
[2017-12-05 19:44:03] CPU #27: 4121 H, 86.55 H/s
[2017-12-05 19:44:03] CPU #14: 1688 H, 87.16 H/s
[2017-12-05 19:44:03] CPU #31: 4155 H, 87.25 H/s
[2017-12-05 19:44:03] CPU #28: 4155 H, 87.25 H/s
[2017-12-05 19:44:03] CPU #15: 4154 H, 87.23 H/s
[2017-12-05 19:44:03] CPU #30: 4154 H, 87.23 H/s
[2017-12-05 19:44:03] CPU #26: 4155 H, 87.25 H/s
[2017-12-05 19:44:03] CPU #13: 4136 H, 86.85 H/s
[2017-12-05 19:44:03] CPU #11: 4163 H, 87.43 H/s
[2017-12-05 19:44:03] CPU #29: 4160 H, 87.36 H/s
[2017-12-05 19:44:03] CPU #9: 3700 H, 77.69 H/s
[2017-12-05 19:44:03] CPU #8: 4148 H, 87.11 H/s
[2017-12-05 19:44:08] CPU #1: 427 H, 88.17 H/s
[2017-12-05 19:44:08] Accepted 10/10 (100%), 123.14 kH, 2769.93 H/s, 63C
[2017-12-05 19:44:24] CPU #5: 1842 H, 88.07 H/s
[2017-12-05 19:44:24] Accepted 11/11 (100%), 120.80 kH, 2770.14 H/s, 62C
[2017-12-05 19:44:26] CPU #20: 2033 H, 88.31 H/s
[2017-12-05 19:44:26] Accepted 12/12 (100%), 118.64 kH, 2770.43 H/s, 63C
[2017-12-05 19:44:29] CPU #19: 2230 H, 87.12 H/s
[2017-12-05 19:44:29] Accepted 13/13 (100%), 116.73 kH, 2770.64 H/s, 62C

EDIT: Still having a few:

[2017-12-05 19:49:17] Rejected 3/29 (10.3%), 80.27 kH, 2752.78 H/s, 62C
[2017-12-05 19:49:17] reject reason: Invalid share

Soooo I changed it to 24 cores, that seemed to be the sweet spot solo mining, now going to run it a while.

[2017-12-05 19:51:45] Accepted 2/3 (66.7%), 14.82 kH, 2738.55 H/s, 63C
[2017-12-05 19:51:50] CPU #9: 1196 H, 170.17 H/s
[2017-12-05 19:51:50] Accepted 3/4 (75.0%), 15.00 kH, 2739.92 H/s, 62C

Only lost a tiny bit of hash rate running 24 threads.

EDIT2:

Changed to only 16 cores, have not lost much speed at all but still getting invalid shares.

Just got an invalid job id error.

{2017-12-05 20:06:31] Rejected 4/24 (16.7%), 34.45 kH, 2738.42 H/s, 63C
[2017-12-05 20:06:31] reject reason: Invalid job id
[2017-12-05 20:06:33] CPU #7: 505 H, 169.63 H/s
[2017-12-05 20:06:34] Accepted 21/25 (84.0%), 32.68 kH, 2738.36 H/s, 62C


EDIT3: Changed to running 8 cores and no invalid shares but the hash rate dropped in half.

[2017-12-05 20:16:24] CPU #0: 6952 H, 172.83 H/s
[2017-12-05 20:16:24] CPU #4: 7658 H, 172.81 H/s
[2017-12-05 20:16:24] CPU #7: 7628 H, 172.11 H/s
[2017-12-05 20:16:24] CPU #5: 7659 H, 172.81 H/s
[2017-12-05 20:16:24] CPU #3: 7656 H, 172.74 H/s
[2017-12-05 20:16:24] CPU #2: 7659 H, 172.81 H/s
[2017-12-05 20:16:25] Stratum difficulty set to 1
[2017-12-05 20:16:43] CPU #2: 3159 H, 172.07 H/s
[2017-12-05 20:16:43] CPU #5: 3159 H, 172.07 H/s
[2017-12-05 20:16:43] CPU #3: 3029 H, 164.98 H/s
[2017-12-05 20:16:43] CPU #0: 3159 H, 172.02 H/s
[2017-12-05 20:16:43] CPU #1: 3159 H, 172.01 H/s
[2017-12-05 20:16:43] CPU #6: 3159 H, 172.01 H/s
[2017-12-05 20:16:43] CPU #4: 3161 H, 172.12 H/s
[2017-12-05 20:16:43] CPU #7: 3147 H, 171.35 H/s
[2017-12-05 20:17:07] CPU #1: 4036 H, 172.79 H/s
[2017-12-05 20:17:07] Accepted 6/6 (100%), 26.01 kH, 1369.41 H/s, 58C
[2017-12-05 20:17:22] CPU #1: 2554 H, 172.71 H/s
[2017-12-05 20:17:22] Accepted 7/7 (100%), 24.53 kH, 1369.33 H/s, 59C
[2017-12-05 20:17:26] CPU #1: 720 H, 172.70 H/s
[2017-12-05 20:17:26] Accepted 8/8 (100%), 22.69 kH, 1369.33 H/s, 59C
[2017-12-05 20:17:41] CPU #3: 9900 H, 172.76 H/s
[2017-12-05 20:17:43] CPU #7: 10.28 kH, 172.28 H/s
[2017-12-05 20:17:43] CPU #0: 10.32 kH, 172.74 H/s
[2017-12-05 20:17:43] CPU #6: 10.32 kH, 172.74 H/s
[2017-12-05 20:17:43] CPU #5: 10.32 kH, 172.74 H/s
[2017-12-05 20:17:43] CPU #2: 10.32 kH, 172.74 H/s
[2017-12-05 20:17:43] CPU #4: 10.33 kH, 172.74 H/s
[2017-12-05 20:17:46] yescryptr16 block 27100, diff 0.013
[2017-12-05 20:17:46] CPU #5: 531 H, 172.79 H/s

 

EDIT4: Jut got an invalid share again.....

2017-12-05 20:23:58] Stratum difficulty set to 1
[2017-12-05 20:23:59] CPU #0: 260 H, 162.04 H/s
[2017-12-05 20:24:00] Rejected 1/16 (6.2%), 36.54 kH, 1371.26 H/s, 58C
[2017-12-05 20:24:00] reject reason: Invalid share

Sooo I'm going to try another pool just to see if thats the problem.

EDIT5: That was the problem , changed pools and now I'm back to 16 threads and ~2745 H/s  Grin

[2017-12-05 20:37:10] CPU #6: 2137 H, 171.52 H/s
[2017-12-05 20:37:10] CPU #5: 2127 H, 170.70 H/s
[2017-12-05 20:37:10] CPU #7: 2114 H, 169.67 H/s
[2017-12-05 20:37:10] CPU #3: 2150 H, 172.55 H/s
[2017-12-05 20:37:10] CPU #0: 2134 H, 171.25 H/s
[2017-12-05 20:37:16] CPU #1: 1082 H, 170.23 H/s
[2017-12-05 20:37:17] Accepted 19/19 (100%), 33.09 kH, 2739.61 H/s, 63C
[2017-12-05 20:37:28] CPU #7: 3005 H, 170.83 H/s
[2017-12-05 20:37:28] Accepted 20/20 (100%), 33.98 kH, 2740.77 H/s, 61C
[2017-12-05 20:37:38] CPU #14: 4818 H, 171.67 H/s
[2017-12-05 20:37:38] Accepted 21/21 (100%), 36.67 kH, 2741.66 H/s, 62C

Now i'll let it run overnight.
hero member
Activity: 756
Merit: 501
Quote
Nope, all go no show. Cheesy

Just be glad all my other dual Xeon boxes are mining other coins......at least for now. Wink


Trying pool mining now.

./cpuminer -a yescryptr16 -t 32 -o stratum+tcp://pool.bilbotel.fr:6234 -u Yxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -p c=YTN

I get about %50 invalid shares if I use all 32 threads but if I use 30 threads it drops to %25  Huh

The fewer threads the lower the invalid shares but lower hash rates.

Trying only 16 threads fo a while.

EDIT:  I forgot I was already mining Sumokoin on all 32 threads. LOLOLOLOLOLOLOLOLOLOLO  Cheesy


Fired up 32 threads again to see what happen now.
You could try disabling Hyperthreading in the BIOS and run with 16 "full" threads. Better than losing so many invalid shares or running at half power imo.
LOL indeed.
full member
Activity: 184
Merit: 103
Poser.  Tongue Grin

Nope, all go no show. Cheesy

Just be glad all my other dual Xeon boxes are mining other coins......at least for now. Wink


Trying pool mining now.

./cpuminer -a yescryptr16 -t 32 -o stratum+tcp://pool.bilbotel.fr:6234 -u Yxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -p c=YTN

I get about %50 invalid shares if I use all 32 threads but if I use 30 threads it drops to %25  Huh

The fewer threads the lower the invalid shares but lower hash rates.

Trying only 16 threads fo a while.

EDIT:  I forgot I was already mining Sumokoin on all 32 threads. LOLOLOLOLOLOLOLOLOLOLO  Cheesy


Fired up 32 threads again to see what happen now.

hero member
Activity: 756
Merit: 501
full member
Activity: 184
Merit: 103
Finally mining .

@LinuxBeast:~/Downloads/crypto coins/Yenten/yenten_ubuntu64_1.2.1$ ./yenten-cli getmininginfo
{
    "blocks" : 26452,
    "currentblocksize" : 1000,
    "currentblocktx" : 0,
    "difficulty" : 0.01624934,
    "errors" : "",
    "genproclimit" : -1,
    "networkhashps" : 507947,
    "pooledtx" : 0,
    "testnet" : false,
    "generate" : true,
    "hashespersec" : 2984


 

{
    "blocks" : 26452,
    "currentblocksize" : 2051,
    "currentblocktx" : 4,
    "difficulty" : 0.01624934,
    "errors" : "",
    "genproclimit" : -1,
    "networkhashps" : 507947,
    "pooledtx" : 26,
    "testnet" : false,
    "generate" : true,
    "hashespersec" : 2995
}

Changed it to 24 cores instead of all 32.

{
"blocks" : 26494,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 0.01052454,
"errors" : "",
"genproclimit" : 24,
"networkhashps" : 446894,
"pooledtx" : 0,
"testnet" : false,
"generate" : true,
"hashespersec" : 3012
}






What processor(s)?

Dual Xeon E5-2667 V3 cpu's
full member
Activity: 184
Merit: 103
Finally got the yenten-1.2.1 GUI wallet to work in Ubuntu 16.04.03 64bit Cool

 

Build yentend 1.2.1 and GUI on Ubuntu 16.04.03
--------------------------------------------------

    sudo apt-get install build-essential
    sudo apt-get install libtool autotools-dev autoconf
    sudo apt-get install libssl-dev
    sudo apt-get install libboost-all-dev
    sudo apt-get install pkg-config
    sudo add-apt-repository ppa:bitcoin/bitcoin
    sudo apt-get update
    sudo apt-get install libdb4.8-dev
    sudo apt-get install libdb4.8++-dev
    sudo apt-get install qt4-dev   <<<<<<<<<<<<<<<<<<<<<<<<<< Add this
    sudo apt-get install protobuf-compiler  <<<<<<<<<<<<<<<<<<<<  Add this
    sudo apt-get install libprotobuf-dev <<<<<<<<<<<<<<<<<<<<<< Add this
    sudo apt-get install protobuf-c-compiler <<<<<<<<<<<<<<<<<<<    git clone https://github.com/conan-equal-newone/yenten.git
    cd yenten
    ./autogen.sh
    ./configure --with-gui
    make


But this was on an intel/x86 machine?


Dual Xeon cpu's.
full member
Activity: 184
Merit: 103
Finally got the yenten-1.2.1 GUI wallet to work in Ubuntu 16.04.03 64bit Cool

 

Build yentend 1.2.1 and GUI on Ubuntu 16.04.03
--------------------------------------------------

    sudo apt-get install build-essential
    sudo apt-get install libtool autotools-dev autoconf
    sudo apt-get install libssl-dev
    sudo apt-get install libboost-all-dev
    sudo apt-get install pkg-config
    sudo add-apt-repository ppa:bitcoin/bitcoin
    sudo apt-get update
    sudo apt-get install libdb4.8-dev
    sudo apt-get install libdb4.8++-dev
    sudo apt-get install qt4-dev   <<<<<<<<<<<<<<<<<<<<<<<<<< Add this
    sudo apt-get install protobuf-compiler  <<<<<<<<<<<<<<<<<<<<  Add this
    sudo apt-get install libprotobuf-dev <<<<<<<<<<<<<<<<<<<<<< Add this
    sudo apt-get install protobuf-c-compiler <<<<<<<<<<<<<<<<<<<    git clone https://github.com/conan-equal-newone/yenten.git
    cd yenten
    ./autogen.sh
    ./configure --with-gui
    make


Looks awesome.. But I have a question 2.9 cpu x32 what is that mean ? Kind of Amazon aws or something?


No, just two Xeon E5-2667 V3 cpu's.
8 cores each with hyperthreading so 32 total.
hero member
Activity: 756
Merit: 501
Finally got my Odroid XU3 lite mining by compiling yentend, wasn't able to compile cpuminer-opt. Is the source of minerd available somewhere?
Mining on 7 of 8 cores at 93°C, Hashrate reports vary wildly: most often it's around 63 but rarely it's reported as 0 or up to 140, probably some kind of lag. Not too bad for an ARM CPU (Exynos 5422), OS is Debian Wheezy. My properly cooled and slightly overclocked FX 8320E does 650 hashes per second btw.

Had to configure with --ignore-incompatible-bdb and remove a "-msse41" from yescrypt.h in src/hash/yescrypt. More could be possible with some ARM optimization and compile option tuning, my only CXXFLAG was O3.

Too bad the hashrate almost doubled today.  Shocked
member
Activity: 322
Merit: 54
Consensus is Constitution
Finally mining .

@LinuxBeast:~/Downloads/crypto coins/Yenten/yenten_ubuntu64_1.2.1$ ./yenten-cli getmininginfo
{
    "blocks" : 26452,
    "currentblocksize" : 1000,
    "currentblocktx" : 0,
    "difficulty" : 0.01624934,
    "errors" : "",
    "genproclimit" : -1,
    "networkhashps" : 507947,
    "pooledtx" : 0,
    "testnet" : false,
    "generate" : true,
    "hashespersec" : 2984


 

{
    "blocks" : 26452,
    "currentblocksize" : 2051,
    "currentblocktx" : 4,
    "difficulty" : 0.01624934,
    "errors" : "",
    "genproclimit" : -1,
    "networkhashps" : 507947,
    "pooledtx" : 26,
    "testnet" : false,
    "generate" : true,
    "hashespersec" : 2995
}

Changed it to 24 cores instead of all 32.

{
"blocks" : 26494,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 0.01052454,
"errors" : "",
"genproclimit" : 24,
"networkhashps" : 446894,
"pooledtx" : 0,
"testnet" : false,
"generate" : true,
"hashespersec" : 3012
}






What processor(s)?
Jump to: