Topic: [ANN] CRAVE 1st POS Masternodes | Dark Assets | I2P | Market =Embrace The Dark= - page 20. (Read 826730 times)
June 18, 2015, 12:29:56 PM
so my 2 cents on the multipool, many fixes needed but that said...Ok so not 24hrs yet but west hash has paid out .022 bit at 18 hr apx. if crave purtichased with that, it is about 26 crave... after doing all the math and I think i got it, mining this does work out about the same as if I were mining my x-11 and my sha-256 machines on what i was mining. So no loss in revenu and hopefully when the display fixes come in and site is tuned up, it will be a nice way to get crave direct from mining. and should help the market. if crave goes to .0015 I'll switch all my miners to it. for now I will leave the ones I have there as I can make a new node every 8-10 days with this mining and my 9 nodes paying me crave. good work all and looking forward to seeing many hash hit it when refined. http://cravemultipool.azurewebsites.net/
June 18, 2015, 11:42:58 AM
Hey guys!! i have a good news for you. coinomat added crave their voting list. just register and vote for crave.
https://coinomat.com/coinvoting.php
The administration full card details are asking for trouble. NOTE on coinomat!
How can I be sure that the cards will not be used to steal?
https://coinomat.com/settings.php#cards-new
You dont need to give your card details to register.
June 18, 2015, 11:31:22 AM
Updated the x64 Windows wallet link in the first post. This has the sync improvement. Syncs from scratch in about 20-30 minutes. Also disables address index by default, lower cpu use, generally runs better, and has updated checkpoints.
Much improvement!
Thanks!
June 18, 2015, 08:52:47 AM
Hey guys!! i have a good news for you. coinomat added crave their voting list. just register and vote for crave.
https://coinomat.com/coinvoting.php
The administration full card details are asking for trouble. NOTE on coinomat!
How can I be sure that the cards will not be used to steal?
https://coinomat.com/settings.php#cards-new
June 18, 2015, 05:13:59 AM
Hey guys!! i have a good news for you. coinomat added crave their voting list. just register and vote for crave.
https://coinomat.com/coinvoting.php
Dont forget voting!
June 18, 2015, 02:01:01 AM
WTF
my crave wallet can't send money to another address.
It asks for my password, as always, I type it and click ok and then...nothing...no err message and no transactions ledger update...
Help please!
I have the version 1.4.2.0-g32a928e installed
try running command "repairwallet" from debugging tab and try again.my crave wallet can't send money to another address.
It asks for my password, as always, I type it and click ok and then...nothing...no err message and no transactions ledger update...
Help please!
I have the version 1.4.2.0-g32a928e installed
20:18:17

repairwallet
20:18:17

{
"wallet check passed" : true
is it fixed for you? I have found that with the wallet locked for staking, and trying so send coins same thing happens, just does nothing. I have to unlock compleatly unchecking for staking only and then it sends with no problem.
}
it looks to me like a serious (security) bug. Any fix in sight as far as you know?
It has nothing to do about the security.Is it a bug?....yes it is.......easiest way (if your wallet stakes) is to close,then open it and fully unlock when sendind Crave...then close again...open and unlock for staking only
June 18, 2015, 01:00:52 AM
WTF
my crave wallet can't send money to another address.
It asks for my password, as always, I type it and click ok and then...nothing...no err message and no transactions ledger update...
Help please!
I have the version 1.4.2.0-g32a928e installed
try running command "repairwallet" from debugging tab and try again.my crave wallet can't send money to another address.
It asks for my password, as always, I type it and click ok and then...nothing...no err message and no transactions ledger update...
Help please!
I have the version 1.4.2.0-g32a928e installed
20:18:17

repairwallet
20:18:17

{
"wallet check passed" : true
is it fixed for you? I have found that with the wallet locked for staking, and trying so send coins same thing happens, just does nothing. I have to unlock compleatly unchecking for staking only and then it sends with no problem.
}
it looks to me like a serious (security) bug. Any fix in sight as far as you know?
June 17, 2015, 08:59:02 PM
Latest crave sync'd great for me, but after running for awhile it crashed with this:
Code:
crave-qt: /usr/include/boost/thread/pthread/recursive_mutex.hpp:110: void boost::recursive_mutex::lock(): Assertion `!pthread_mutex_lock(&m)' failed.
Aborted
I haven't seen the error again, but just wondering what it may have been...
June 17, 2015, 05:50:59 PM
All should check out starin's new forum and sign up. http://mycrave.org/forums/index.php
The transfer of cravetalk.org has been done. I transferred the forums too www.cravetalk.org
Feel free to come and say hi. I'll be there all the time.
Also I have decreased the faucet payments a bit since we got a lot of interest. And thanks for it.
I'd also like to encourage everyone to host their own CRAVE faucet if they somehow can profit from them (our faucet doesn't have ad for now). And since I had some requests I'll be writing a detailed how-to in forums tomorrow If I can find some spare time.
We are also testing CRAVE multipool and it works just fine. We have some miner front-end bugs that we need to solve (jj is DA MAN!). Than I'll try to add some design into it and we will launch it.
Again, thanks for your interest and awesome support guys! If you haven't contributed yet, be sure to pick up your @mycrave.org domain!
Cool will check it out later!!!
June 17, 2015, 05:20:24 PM
All should check out starin's new forum and sign up. http://mycrave.org/forums/index.php
The transfer of cravetalk.org has been done. I transferred the forums too www.cravetalk.org
Feel free to come and say hi. I'll be there all the time.
Also I have decreased the faucet payments a bit since we got a lot of interest. And thanks for it.
I'd also like to encourage everyone to host their own CRAVE faucet if they somehow can profit from them (our faucet doesn't have ad for now). And since I had some requests I'll be writing a detailed how-to in forums tomorrow If I can find some spare time.
We are also testing CRAVE multipool and it works just fine. We have some miner front-end bugs that we need to solve (jj is DA MAN!). Than I'll try to add some design into it and we will launch it.
Again, thanks for your interest and awesome support guys! If you haven't contributed yet, be sure to pick up your @mycrave.org domain!
June 17, 2015, 02:38:01 PM
Hey guys!! i have a good news for you. coinomat added crave their voting list. just register and vote for crave.
https://coinomat.com/coinvoting.php
June 17, 2015, 01:34:15 PM
All should check out starin's new forum and sign up. http://mycrave.org/forums/index.php
June 17, 2015, 01:27:04 PM
WTF
my crave wallet can't send money to another address.
It asks for my password, as always, I type it and click ok and then...nothing...no err message and no transactions ledger update...
Help please!
I have the version 1.4.2.0-g32a928e installed
try running command "repairwallet" from debugging tab and try again.my crave wallet can't send money to another address.
It asks for my password, as always, I type it and click ok and then...nothing...no err message and no transactions ledger update...
Help please!
I have the version 1.4.2.0-g32a928e installed
20:18:17

repairwallet
20:18:17

{
"wallet check passed" : true
is it fixed for you? I have found that with the wallet locked for staking, and trying so send coins same thing happens, just does nothing. I have to unlock compleatly unchecking for staking only and then it sends with no problem.
}
June 17, 2015, 01:25:13 PM
WTF
my crave wallet can't send money to another address.
It asks for my password, as always, I type it and click ok and then...nothing...no err message and no transactions ledger update...
Help please!
I have the version 1.4.2.0-g32a928e installed
try running command "repairwallet" from debugging tab and try again.my crave wallet can't send money to another address.
It asks for my password, as always, I type it and click ok and then...nothing...no err message and no transactions ledger update...
Help please!
I have the version 1.4.2.0-g32a928e installed
20:18:17

repairwallet
20:18:17

{
"wallet check passed" : true
is it fixed for you? I have found that with the wallet locked for staking, and trying so send coins same thing happens, just does nothing. I have to unlock compleatly unchecking for staking only and then it sends with no problem.
}
June 17, 2015, 01:22:30 PM
WTF
my crave wallet can't send money to another address.
It asks for my password, as always, I type it and click ok and then...nothing...no err message and no transactions ledger update...
Help please!
I have the version 1.4.2.0-g32a928e installed
try running command "repairwallet" from debugging tab and try again.my crave wallet can't send money to another address.
It asks for my password, as always, I type it and click ok and then...nothing...no err message and no transactions ledger update...
Help please!
I have the version 1.4.2.0-g32a928e installed
20:18:17

repairwallet
20:18:17

{
"wallet check passed" : true
}
June 17, 2015, 01:19:00 PM
WTF
my crave wallet can't send money to another address.
It asks for my password, as always, I type it and click ok and then...nothing...no err message and no transactions ledger update...
Help please!
I have the version 1.4.2.0-g32a928e installed
try running command "repairwallet" from debugging tab and try again.my crave wallet can't send money to another address.
It asks for my password, as always, I type it and click ok and then...nothing...no err message and no transactions ledger update...
Help please!
I have the version 1.4.2.0-g32a928e installed
20:18:17

repairwallet
20:18:17

{
"wallet check passed" : true
}
June 17, 2015, 01:17:12 PM
WTF
my crave wallet can't send money to another address.
It asks for my password, as always, I type it and click ok and then...nothing...no err message and no transactions ledger update...
Help please!
I have the version 1.4.2.0-g32a928e installed
try running command "repairwallet" from debugging tab and try again. my crave wallet can't send money to another address.
It asks for my password, as always, I type it and click ok and then...nothing...no err message and no transactions ledger update...
Help please!
I have the version 1.4.2.0-g32a928e installed
June 17, 2015, 01:16:19 PM
Updated the x64 Windows wallet link in the first post. This has the sync improvement. Syncs from scratch in about 20-30 minutes. Also disables address index by default, lower cpu use, generally runs better, and has updated checkpoints.
i can confirm that sync issue is no longer issue. took only 20min to full sync from scratch thanks for the fix, awsome job. June 17, 2015, 12:48:14 PM
WTF
my crave wallet can't send money to another address.
It asks for my password, as always, I type it and click ok and then...nothing...no err message and no transactions ledger update...
Help please!
I have the version 1.4.2.0-g32a928e installed
my crave wallet can't send money to another address.
It asks for my password, as always, I type it and click ok and then...nothing...no err message and no transactions ledger update...
Help please!
I have the version 1.4.2.0-g32a928e installed
June 17, 2015, 11:13:12 AM
Someone told here how to connect using i2p few weeks ago.
Yeah, that was probably in a guide I quoted.. if I can find the post, I'll link it.
(Its actually very similar to connecting in the Sling guide - I actually quoted both guides from another coin's guide)
I wanted to know how many are actually connecting lol
Jump to: