[ANN] CRAVE 1st POS Masternodes | Dark Assets | I2P | Market =Embrace The Dark= - page 533.

Yaremi

legendary

Activity: 1974

Merit: 1160

Quote from: racer2012 on April 07, 2015, 02:30:27 PM

Quote from: racer2012 on April 07, 2015, 02:19:24 PM

HARDFORK 8-APRIL 23:59 GMT
PLEASE UPDATE YOUR WALLETS AND NODES BEFORE WED 8-APRIL 23:59 GMT

This hardfork is when Masternode Payment enforcement goes into effect. The target timespan for difficulty adjustment will also switch at this time from 24 minutes to 2 minutes.

What if I have all coins on exchange and I have not install any wallets yet???

Need to write a request to update the wallet to Exchange Administration

LightningFury

hero member

Activity: 687

Merit: 509

Quote from: industrialcoinmagic on April 07, 2015, 02:29:07 PM

Quote from: LightningFury on April 07, 2015, 02:27:46 PM

Quote from: racer2012 on April 07, 2015, 02:19:24 PM

HARDFORK 8-APRIL 23:59 GMT
PLEASE UPDATE YOUR WALLETS AND NODES BEFORE WED 8-APRIL 23:59 GMT

This hardfork is when Masternode Payment enforcement goes into effect. The target timespan for difficulty adjustment will also switch at this time from 24 minutes to 2 minutes.

i cannot any more stake with my normal wallet only Masternode can stake?

or i understand that wrong?

You CAN stake. A portion of the stake reward goes to the masternodes. But you can continue to stake as usual.

ah thx nice Grin

Hyperjacked

legendary

Activity: 1624

Merit: 1126

It's all mathematics...!

Quote from: cryptohangman on April 07, 2015, 01:36:45 PM

When cryptsy gonna add Crave ?

can't say I haven't tried...Vern will add it soon imo! Can't pass on the trade volume...

racer2012

full member

Activity: 238

Merit: 100

Quote from: racer2012 on April 07, 2015, 02:19:24 PM

HARDFORK 8-APRIL 23:59 GMT
PLEASE UPDATE YOUR WALLETS AND NODES BEFORE WED 8-APRIL 23:59 GMT

This hardfork is when Masternode Payment enforcement goes into effect. The target timespan for difficulty adjustment will also switch at this time from 24 minutes to 2 minutes.

What if I have all coins on exchange and I have not install any wallets yet???

jadefalke

legendary

Activity: 1456

Merit: 1014

i have 2 Masternode payments with 0 Amount is that normal?

   "account" : "",
   "address" : "C2RsWDb7tr1qvvyrPNzNptjT7RjK6EQueq",
   "category" : "immature",
   "amount" : 0.00000000,
   "confirmations" : 48,
   "generated" : true,
   "blockhash" : "bfd13ae9f2ba3f0fb6b1cbaf66d3c381d1644a41b1f2d9f559ad7f24e8b1cd0f",
   "blockindex" : 1,
   "blocktime" : 1428431840,
   "txid" : "4718f91b21054befb7cc607339ca1a628ddb9acda4739293fbf85da64ce4562d",
   "time" : 1428431840,
   "timereceived" : 1428431842
   },
   {
   "account" : "",
   "address" : "C2RsWDb7tr1qvvyrPNzNptjT7RjK6EQueq",
   "category" : "immature",
   "amount" : 0.00000000,
   "confirmations" : 41,
   "generated" : true,
   "blockhash" : "6abc6da1688a089c06eed6bad87d3d2dc60527c9182fba00508f001d0227745b",
   "blockindex" : 1,
   "blocktime" : 1428432384,
   "txid" : "54bcbf60e78b1041a6b4e812844c18e0188733d6b7b615a798f93aeca5a05993",
   "time" : 1428432384,
   "timereceived" : 1428432384

industrialcoinmagic

full member

Activity: 140

Merit: 100

Quote from: LightningFury on April 07, 2015, 02:27:46 PM

Quote from: racer2012 on April 07, 2015, 02:19:24 PM

HARDFORK 8-APRIL 23:59 GMT
PLEASE UPDATE YOUR WALLETS AND NODES BEFORE WED 8-APRIL 23:59 GMT

This hardfork is when Masternode Payment enforcement goes into effect. The target timespan for difficulty adjustment will also switch at this time from 24 minutes to 2 minutes.

i cannot any more stake with my normal wallet only Masternode can stake?

or i understand that wrong?

You CAN stake. A portion of the stake reward goes to the masternodes. But you can continue to stake as usual.

moneycharm

full member

Activity: 189

Merit: 100

Quote from: racer2012 on April 07, 2015, 02:19:24 PM

PLEASE UPDATE YOUR WALLETS AND NODES....

I have 2 connections only. How can I add other? Can I add masternode address? Thank your for answer.

LightningFury

hero member

Activity: 687

Merit: 509

Quote from: racer2012 on April 07, 2015, 02:19:24 PM

HARDFORK 8-APRIL 23:59 GMT
PLEASE UPDATE YOUR WALLETS AND NODES BEFORE WED 8-APRIL 23:59 GMT

This hardfork is when Masternode Payment enforcement goes into effect. The target timespan for difficulty adjustment will also switch at this time from 24 minutes to 2 minutes.

i cannot any more stake with my normal wallet only Masternode can stake?

or i understand that wrong?

racer2012

full member

Activity: 238

Merit: 100

HARDFORK 8-APRIL 23:59 GMT
PLEASE UPDATE YOUR WALLETS AND NODES BEFORE WED 8-APRIL 23:59 GMT

This hardfork is when Masternode Payment enforcement goes into effect. The target timespan for difficulty adjustment will also switch at this time from 24 minutes to 2 minutes.

gitbknowsall

sr. member

Activity: 336

Merit: 250

what happened to all the buys Sad

no more surpression please

coinspredator

sr. member

Activity: 432

Merit: 250

Quote from: david1365 on April 07, 2015, 02:06:12 PM

Quote from: Yaremi on April 07, 2015, 02:03:57 PM

Quote from: david1365 on April 07, 2015, 02:02:11 PM

Is there any tutorial to setup masternode?
If not, can someone simply explain how to setup masternode?

Quote

Example Adrenaline Node .conf Configuration

Code:

rpcallowip=127.0.0.1
rpcuser=MAKEUPYOUROWNUSERNAME
rpcpassword=MAKEUPYOUROWNPASSWORD
rpcport=MAKEUPYOUROWNPORT
server=1
daemon=1
listen=1
staking=0
port=9999
masternodeaddr=YOUR_IP:9999
masternode=1
masternodeprivkey=KEY GENERATED BY COMMAND

Set the masternodeprivkey to the result of running:

Code:

masternode genkey

from the RPC console in the local wallet.

If you are running your masternode as a hidden service, replace YOUR_IP with your onion hostname (typically found in /var/lib/tor/YOURHIDDENSERVICENAME/hostname).

Port 9999 must be open.

If you are using the hot/cold system where you are remotely activating your masternode from your local wallet, you will also put these entries in your local (cold) wallet .conf:

Code:

masternodeaddr=YOUR_IP:9999
masternode=1
masternodeprivkey=KEY GENERATED BY COMMAND

Then, start the daemon on your remote masternode, start your local wallet, and then you can start your masternode from the RPC console:

Code:

masternode start

Thanks

I am trying set up my node right now. Cool

Yaremi

legendary

Activity: 1974

Merit: 1160

All with masternodes

Check port 9999 open in here

http://www.canyouseeme.org/

If dont open masternodes not work

Quote

Come on man! Get a calculator and/or a pair of glasses Cheesy

It's 525600, or a little over half a million. Not one tenth of that! This is some essential info, please be more careful next time!

Ok. sorry.

coinspeed

full member

Activity: 225

Merit: 250

Quote

1 block - 1 crave.

1 block = 1 minute

1440 minute in day

1440 crave everyday

Year = 365 day.

1440*365=52560

52560 every year

Come on man! Get a calculator and/or a pair of glasses Cheesy

It's 525600, or a little over half a million. Not one tenth of that! This is some essential info, please be more careful next time!

dreamspark

hero member

Activity: 798

Merit: 1000

Quote from: Digital_Currency_LTD on April 07, 2015, 02:08:36 PM

Quote from: DonQuijote on April 07, 2015, 02:06:53 PM

Quote from: Digital_Currency_LTD on April 07, 2015, 02:05:08 PM

Quote from: sologap on April 07, 2015, 01:59:35 PM

masternode count : 51, thats 25,500 crave Grin

where can I check the nodes?

type in your console:
masternode count

for me is 33, not 51.

52 for me. Thats around 5% of all Crave currently Grin

I gave up setting up mine until there are some better instructions so thats another 8 at least

Digital_Currency_LTD

hero member

Activity: 798

Merit: 1000

Quote from: DonQuijote on April 07, 2015, 02:06:53 PM

Quote from: Digital_Currency_LTD on April 07, 2015, 02:05:08 PM

Quote from: sologap on April 07, 2015, 01:59:35 PM

masternode count : 51, thats 25,500 crave Grin

where can I check the nodes?

type in your console:
masternode count

for me is 33, not 51.

EDIT: Now 36.

DonQuijote

legendary

Activity: 1551

Merit: 1002

♠ ♥ ♣ ♦ < ♛♚&#

Quote from: Digital_Currency_LTD on April 07, 2015, 02:05:08 PM

Quote from: sologap on April 07, 2015, 01:59:35 PM

masternode count : 51, thats 25,500 crave Grin

where can I check the nodes?

type in your console:
masternode count

david1365

legendary

Activity: 994

Merit: 1000

Quote from: Yaremi on April 07, 2015, 02:03:57 PM

Quote from: david1365 on April 07, 2015, 02:02:11 PM

Is there any tutorial to setup masternode?
If not, can someone simply explain how to setup masternode?

Quote

Example Adrenaline Node .conf Configuration

Code:

rpcallowip=127.0.0.1
rpcuser=MAKEUPYOUROWNUSERNAME
rpcpassword=MAKEUPYOUROWNPASSWORD
rpcport=MAKEUPYOUROWNPORT
server=1
daemon=1
listen=1
staking=0
port=9999
masternodeaddr=YOUR_IP:9999
masternode=1
masternodeprivkey=KEY GENERATED BY COMMAND

Set the masternodeprivkey to the result of running:

Code:

masternode genkey

from the RPC console in the local wallet.

If you are running your masternode as a hidden service, replace YOUR_IP with your onion hostname (typically found in /var/lib/tor/YOURHIDDENSERVICENAME/hostname).

Port 9999 must be open.

If you are using the hot/cold system where you are remotely activating your masternode from your local wallet, you will also put these entries in your local (cold) wallet .conf:

Code:

masternodeaddr=YOUR_IP:9999
masternode=1
masternodeprivkey=KEY GENERATED BY COMMAND

Then, start the daemon on your remote masternode, start your local wallet, and then you can start your masternode from the RPC console:

Code:

masternode start

Thanks

Digital_Currency_LTD

hero member

Activity: 798

Merit: 1000

Quote from: sologap on April 07, 2015, 01:59:35 PM

masternode count : 51, thats 25,500 crave Grin

where can I check the nodes?

Cryptophile

full member

Activity: 224

Merit: 100

Is there any possibility of the masternode not running correctly even when it says "masternode successfully started"? Still no payout on mine...

Yaremi

legendary

Activity: 1974

Merit: 1160

Quote from: david1365 on April 07, 2015, 02:02:11 PM

Is there any tutorial to setup masternode?
If not, can someone simply explain how to setup masternode?

Quote

Example Adrenaline Node .conf Configuration

Code:

rpcallowip=127.0.0.1
rpcuser=MAKEUPYOUROWNUSERNAME
rpcpassword=MAKEUPYOUROWNPASSWORD
rpcport=MAKEUPYOUROWNPORT
server=1
daemon=1
listen=1
staking=0
port=9999
masternodeaddr=YOUR_IP:9999
masternode=1
masternodeprivkey=KEY GENERATED BY COMMAND

Set the masternodeprivkey to the result of running:

Code:

masternode genkey

from the RPC console in the local wallet.

If you are running your masternode as a hidden service, replace YOUR_IP with your onion hostname (typically found in /var/lib/tor/YOURHIDDENSERVICENAME/hostname).

Port 9999 must be open.

If you are using the hot/cold system where you are remotely activating your masternode from your local wallet, you will also put these entries in your local (cold) wallet .conf:

Code:

masternodeaddr=YOUR_IP:9999
masternode=1
masternodeprivkey=KEY GENERATED BY COMMAND

Then, start the daemon on your remote masternode, start your local wallet, and then you can start your masternode from the RPC console:

Code:

masternode start

Topic: [ANN] CRAVE 1st POS Masternodes | Dark Assets | I2P | Market =Embrace The Dark= - page 533. (Read 826757 times)