I was reading some back posts and you really think it's the exchanges fault the coin is at 1 satoshi?
Give me a break, I was the first exchange to carry HVC and Blackcoin and people came in drones and spiked the volume. If a coin is good people will come, if you don't sell for more than a satoshi on my exchange don't expect much more on ANY other exchange.
It seems everyone thinks mintpal or cryptsy is the only thing that will be good for their coin.
Here's the deal, if you think its cheap, put your money where you mouth is and buy it all up. Then when it goes to mintpal you will be a millionaire.
Topic: [ANN] [CTD] [SHA-3] CateDoge!Time warp patched! v1.3, Rapid transactions - page 6. (Read 41338 times)
April 11, 2014, 11:03:15 PM
April 11, 2014, 01:51:25 PM
its possible that you have permission problems
Try running as administrator, and if you're not gonna mine solo, you can try removing "server=1" from the conf.
Tried to run as administrator - does not work. Differently tried the result is the same. On the laptop will not start too.
ok, use rpcuser=abc
rpcpassword=DKl20DKowiDMSJKLOiwieoUI302HJI30Kjoiw
example. Use this. Then update, if it worked?
Thanks, it works. But only on the laptop.
Nevertheless, thank you all.
Good that you got it to work. just copy the file from laptop to pc. It should work.
Awais, how much of the premine did you use to restore lost balance? I'm up to 30 mil CTD now. I can drop some back and/or put more into the give-away if you want me to.
Edit: 32 Mil.
I have given away 20000000 coins in total. to 2 pool owners.
Should fix the pain a bit
April 11, 2014, 01:43:19 PM
its possible that you have permission problems
Try running as administrator, and if you're not gonna mine solo, you can try removing "server=1" from the conf.
Tried to run as administrator - does not work. Differently tried the result is the same. On the laptop will not start too.
ok, use rpcuser=abc
rpcpassword=DKl20DKowiDMSJKLOiwieoUI302HJI30Kjoiw
example. Use this. Then update, if it worked?
Thanks, it works. But only on the laptop.
Nevertheless, thank you all.
Good that you got it to work. just copy the file from laptop to pc. It should work.
Awais, how much of the premine did you use to restore lost balance? I'm up to 30 mil CTD now. I can drop some back and/or put more into the give-away if you want me to.
Edit: 32 Mil.
I have given away 20000000 coins in total. to 2 pool owners.
April 11, 2014, 10:32:40 AM
its possible that you have permission problems
Try running as administrator, and if you're not gonna mine solo, you can try removing "server=1" from the conf.
Tried to run as administrator - does not work. Differently tried the result is the same. On the laptop will not start too.
ok, use rpcuser=abc
rpcpassword=DKl20DKowiDMSJKLOiwieoUI302HJI30Kjoiw
example. Use this. Then update, if it worked?
Thanks, it works. But only on the laptop.
Nevertheless, thank you all.
Good that you got it to work. just copy the file from laptop to pc. It should work.
Awais, how much of the premine did you use to restore lost balance? I'm up to 30 mil CTD now. I can drop some back and/or put more into the give-away if you want me to.
Edit: 32 Mil.
April 11, 2014, 03:02:46 AM
its possible that you have permission problems
Try running as administrator, and if you're not gonna mine solo, you can try removing "server=1" from the conf.
Tried to run as administrator - does not work. Differently tried the result is the same. On the laptop will not start too.
ok, use rpcuser=abc
rpcpassword=DKl20DKowiDMSJKLOiwieoUI302HJI30Kjoiw
example. Use this. Then update, if it worked?
Thanks, it works. But only on the laptop.
Nevertheless, thank you all.
Good that you got it to work. just copy the file from laptop to pc. It should work.
April 11, 2014, 02:42:02 AM
its possible that you have permission problems
Try running as administrator, and if you're not gonna mine solo, you can try removing "server=1" from the conf.
Tried to run as administrator - does not work. Differently tried the result is the same. On the laptop will not start too.
ok, use rpcuser=abc
rpcpassword=DKl20DKowiDMSJKLOiwieoUI302HJI30Kjoiw
example. Use this. Then update, if it worked?
Thanks, it works. But only on the laptop.
Nevertheless, thank you all.
April 11, 2014, 12:40:17 AM
3 exchanges but no buyer!!!
April 10, 2014, 03:24:49 PM
its possible that you have permission problems
Try running as administrator, and if you're not gonna mine solo, you can try removing "server=1" from the conf.
Tried to run as administrator - does not work. Differently tried the result is the same. On the laptop will not start too.
ok, use rpcuser=abc
rpcpassword=DKl20DKowiDMSJKLOiwieoUI302HJI30Kjoiw
example. Use this. Then update, if it worked?
April 10, 2014, 03:14:51 PM
its possible that you have permission problems
Try running as administrator, and if you're not gonna mine solo, you can try removing "server=1" from the conf.
Tried to run as administrator - does not work. Differently tried the result is the same. On the laptop will not start too.
April 10, 2014, 03:06:52 PM
its possible that you have permission problems
Try running as administrator, and if you're not gonna mine solo, you can try removing "server=1" from the conf.
April 10, 2014, 01:24:57 PM
its possible that you have permission problems
April 10, 2014, 01:13:11 PM
My wallet is not synchronized! What to do 
Please help!
Please help!you're on windows?
Make sure you're on CateDoge v1.3
run the qt wallet.
Close the qt wallet.
type %appdata% in run and hit enter.
Go to CateDoge folder.
make a conf file called catedoge.conf. Make sure its .conf not .txt
paste this in the file:
Code:
listen=1
server=1
daemon=1
rpcuser=suchdoge
rpcpassword=muchcate
rpcport=5708
p2pport=5707
addnode=64.90.187.147
addnode=64.90.187.195
addnode=217.122.94.80
addnode=148.251.15.235
addnode=67.1.106.66
You should connect now
http://clip2net.com/clip/m0/thumb640/1397142624-clip-94kb.jpg
Had the same issue.
Remove all the nodes. only add this one:
addnode=64.90.187.147
let it sync. When it's done, add this one:
addnode=54.208.127.165
Still synced. There's a filthy node in there, don't know which.
Oh, remove ALL the datafiles except your wallet, of course, before you do this.
with label "-server" shows the following picture. I understand that he does not see the path to the file. Right?
http://clip2net.com/clip/m0/thumb640/1397149752-clip-100kb.jpg
April 10, 2014, 11:41:31 AM
My wallet is not synchronized! What to do Please help!
Please help!you're on windows?
Make sure you're on CateDoge v1.3
run the qt wallet.
Close the qt wallet.
type %appdata% in run and hit enter.
Go to CateDoge folder.
make a conf file called catedoge.conf. Make sure its .conf not .txt
paste this in the file:
Code:
listen=1
server=1
daemon=1
rpcuser=suchdoge
rpcpassword=muchcate
rpcport=5708
p2pport=5707
addnode=64.90.187.147
addnode=64.90.187.195
addnode=217.122.94.80
addnode=148.251.15.235
addnode=67.1.106.66
You should connect now
Had the same issue.
Remove all the nodes. only add this one:
addnode=64.90.187.147
let it sync. When it's done, add this one:
addnode=54.208.127.165
Still synced. There's a filthy node in there, don't know which.
Oh, remove ALL the datafiles except your wallet, of course, before you do this.
April 10, 2014, 11:10:45 AM
My wallet is not synchronized! What to do Please help!
Please help!you're on windows?
Make sure you're on CateDoge v1.3
run the qt wallet.
Close the qt wallet.
type %appdata% in run and hit enter.
Go to CateDoge folder.
make a conf file called catedoge.conf. Make sure its .conf not .txt
paste this in the file:
Code:
listen=1
server=1
daemon=1
rpcuser=suchdoge
rpcpassword=muchcate
rpcport=5708
p2pport=5707
addnode=64.90.187.147
addnode=64.90.187.195
addnode=217.122.94.80
addnode=148.251.15.235
addnode=67.1.106.66
You should connect now
http://clip2net.com/clip/m0/thumb640/1397142624-clip-94kb.jpg
April 10, 2014, 08:35:54 AM
I sent you some 
[/quote]
well i try to do all of them but something is wrong!!!did you have any other idea??maybe needs computer settings first before start doing GPU settings?its my first time that i am trying to mining with GPU!!really thank for your time i take the coins and i will keep them thank you very much!!
[/quote]
well i try to do all of them but something is wrong!!!did you have any other idea??maybe needs computer settings first before start doing GPU settings?its my first time that i am trying to mining with GPU!!really thank for your time
i take the coins and i will keep them thank you very much!! April 10, 2014, 07:19:29 AM
I have noticed that hashrate and buying power has actually decreased for almost all the coins. I hope once bitcoin recovers. We'll be able to recover as well.
The market is depressed, it will take time until the next bullish wave. I do not care, it is normal, imo it's time to build and maintain.Yeah, its just kind of annoying that we released the coin in a messed up time
April 10, 2014, 06:44:26 AM
I have noticed that hashrate and buying power has actually decreased for almost all the coins. I hope once bitcoin recovers. We'll be able to recover as well.
The market is depressed, it will take time until the next bullish wave. I do not care, it is normal, imo it's time to build and maintain. April 10, 2014, 05:50:48 AM
hello community!!i am nooby here and i want to start GPU mining..and obviously i am a girl but i found this coin inderesting!i have HD 5450 card!!can anyone help how i can setup my computer to start mining??
hi! welcome to catedogr community. hope we can be successful. hd 5450 is an old gpu. which will earn you very little catedoges. go to first page of this thread and download the cgminer for windows. and run the cgminer file. there is a cgminer.conf file as well. which has basic parameters to mining config.
are you completely new to cryptocurrencies and require a lot more guidance?
download the catedoge wallet. and then send me your wallet address. i will send you coins. hold onto them forever
:O thank you
my wallet adress is SkURgHaB1ZkmYvQZ7h68MRHE6NMZGmWcGq!!thank you for the information i will do all off them and i will come back to tell you offcorse i will keep them and i am sure they have future go go CateDoge coin 
I sent you some
April 10, 2014, 04:41:43 AM
My wallet is not synchronized! What to do Please help!
Please help!you're on windows?
Make sure you're on CateDoge v1.3
run the qt wallet.
Close the qt wallet.
type %appdata% in run and hit enter.
Go to CateDoge folder.
make a conf file called catedoge.conf. Make sure its .conf not .txt
paste this in the file:
Code:
listen=1
server=1
daemon=1
rpcuser=suchdoge
rpcpassword=muchcate
rpcport=5708
p2pport=5707
addnode=64.90.187.147
addnode=64.90.187.195
addnode=217.122.94.80
addnode=148.251.15.235
addnode=67.1.106.66
You should connect now
April 10, 2014, 04:19:45 AM
My wallet is not synchronized! What to do Please help!
Please help! Jump to: