[ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX] - page 208.

shuttwind215

newbie

Activity: 4

Merit: 0

Quote from: ilovecudacompute on July 29, 2014, 03:07:28 PM

Quote from: shuttwind215 on July 29, 2014, 02:52:46 PM

Quote from: ilovecudacompute on July 29, 2014, 02:44:35 PM

Quote from: shuttwind215 on July 29, 2014, 02:38:02 PM

YACoin:
cudaminer.exe -l K430x8 -o stratum+tcp://yac.coinmine.pl:9088 -u censored.censored -p censored --algo=scrypt-jane:YAC
Gainward GTX 650 non-ti 1GB gddr5 Revision A2 128Bit buss not oc-ed installed all newest CUDA etc. drivers
K430x8 was found automaticly
Here is a pic of error message:
https://i.imgur.com/PWYWE3K.png?1

If you run with auto-tune do you get any errors ??

Those were settings from auto-tune(yeah it crashed too) ,everytime I auto_Tune it just crashes after founding correct kernel doing one output ,I thinked that maybe I should put kernel settings on start(who knows).
Do you use Intel Graphics for monitor output?

I have never mined YAC maybe someone more knowledgeable than me can help you with that coin
If auto-tune crashes too maybe something else is wrong? did you make any recent changes in hardware/drivers etc ?

Installed CUDA.
With cuda there where bundled new Graphic Card Driver ,no hardware changes.
Yes I have rebooted win7 64 after cuda installed ,and yes I've selected x64 win7 cuda drivers for desktop.
It would not be such a big deal If minerd worked with YAC ,and moddified minerd(with some cpu extensions support) worked with stratum.

Breadpudding

member

Activity: 76

Merit: 12

Hi djm34 & tsiv,

Thanks for putting that new luffa algo in your miners right away

Is it normal that i'm only getting 57.5Mhs max hash with your new luffa miners, on a 750ti overclocked, solo and on the supr pool?

BP

tbearhere

legendary

Activity: 3164

Merit: 1003

Quote from: Breadpudding on July 29, 2014, 03:04:35 PM

Hm, that's weird, I got that error before I put in the 340.43 beta drivers last night.

Ya, hopefully the new 340.52 drivers fix the problem

Quote from: tbearhere on July 29, 2014, 02:53:05 PM

wow it worked and says unable to query number of cuda dievices! is an nvidia driver installed

3788 is in
EDIT: driver 340.43 will not work on mine that must b the problem
im going to try 340.52

loading in now

ilovecudacompute

member

Activity: 112

Merit: 10

Quote from: shuttwind215 on July 29, 2014, 02:52:46 PM

Quote from: ilovecudacompute on July 29, 2014, 02:44:35 PM

Quote from: shuttwind215 on July 29, 2014, 02:38:02 PM

YACoin:
cudaminer.exe -l K430x8 -o stratum+tcp://yac.coinmine.pl:9088 -u censored.censored -p censored --algo=scrypt-jane:YAC
Gainward GTX 650 non-ti 1GB gddr5 Revision A2 128Bit buss not oc-ed installed all newest CUDA etc. drivers
K430x8 was found automaticly
Here is a pic of error message:

If you run with auto-tune do you get any errors ??

Those were settings from auto-tune(yeah it crashed too) ,everytime I auto_Tune it just crashes after founding correct kernel doing one output ,I thinked that maybe I should put kernel settings on start(who knows).
Do you use Intel Graphics for monitor output?

I have never mined YAC maybe someone more knowledgeable than me can help you with that coin
If auto-tune crashes too maybe something else is wrong? did you make any recent changes in hardware/drivers etc ?

Breadpudding

member

Activity: 76

Merit: 12

Hm, that's weird, I got that error before I put in the 340.43 beta drivers last night.

Ya, hopefully the new 340.52 drivers fix the problem

Quote from: tbearhere on July 29, 2014, 02:53:05 PM

wow it worked and says unable to query number of cuda dievices! is an nvidia driver installed

3788 is in
EDIT: driver 340.43 will not work on mine that must b the problem
im going to try 340.52

tbearhere

legendary

Activity: 3164

Merit: 1003

Quote from: Breadpudding on July 29, 2014, 02:45:33 PM

Try it with no ":", when I put that there it skips over the command.

Quote from: tbearhere on July 29, 2014, 02:27:31 PM

Quote from: Breadpudding on July 29, 2014, 02:24:59 PM

Just to make sure, you put the pause command on a new line right?

Quote from: tbearhere on July 29, 2014, 02:18:49 PM

i looked at everything and the pause command wont work either it doesn't make any sense i dont know

nvMiner65.exe -a luffa -o stratum+tcp://doom.suprnova.cc:5111 -u razorsedge.doom1 -p x -d 0,1,2,3
:pause

wow it worked and says unable to query number of cuda dievices! is an nvidia driver installed

3788 is in
EDIT: driver 340.43 will not work on mine that must b the problem
im going to try 340.52

shuttwind215

newbie

Activity: 4

Merit: 0

Quote from: ilovecudacompute on July 29, 2014, 02:44:35 PM

Quote from: shuttwind215 on July 29, 2014, 02:38:02 PM

YACoin:
cudaminer.exe -l K430x8 -o stratum+tcp://yac.coinmine.pl:9088 -u censored.censored -p censored --algo=scrypt-jane:YAC
Gainward GTX 650 non-ti 1GB gddr5 Revision A2 128Bit buss not oc-ed installed all newest CUDA etc. drivers
K430x8 was found automaticly
Here is a pic of error message:
https://i.imgur.com/PWYWE3K.png?1

If you run with auto-tune do you get any errors ??

Those were settings from auto-tune(yeah it crashed too) ,everytime I auto_Tune it just crashes after founding correct kernel doing one output ,I thinked that maybe I should put kernel settings on start(who knows).
Do you use Intel Graphics for monitor output?

djm34

legendary

Activity: 1400

Merit: 1050

Quote from: Breadpudding on July 29, 2014, 02:45:33 PM

Try it with no ":", when I put that there it skips over the command.

Quote from: tbearhere on July 29, 2014, 02:27:31 PM

Quote from: Breadpudding on July 29, 2014, 02:24:59 PM

Just to make sure, you put the pause command on a new line right?

Quote from: tbearhere on July 29, 2014, 02:18:49 PM

i looked at everything and the pause command wont work either it doesn't make any sense i dont know

nvMiner65.exe -a luffa -o stratum+tcp://doom.suprnova.cc:5111 -u razorsedge.doom1 -p x -d 0,1,2,3
:pause

remove the ":" in front of pause

Breadpudding

member

Activity: 76

Merit: 12

Try it with no ":", when I put that there it skips over the command.

Quote from: tbearhere on July 29, 2014, 02:27:31 PM

Quote from: Breadpudding on July 29, 2014, 02:24:59 PM

Just to make sure, you put the pause command on a new line right?

Quote from: tbearhere on July 29, 2014, 02:18:49 PM

i looked at everything and the pause command wont work either it doesn't make any sense i dont know

nvMiner65.exe -a luffa -o stratum+tcp://doom.suprnova.cc:5111 -u razorsedge.doom1 -p x -d 0,1,2,3
:pause

ilovecudacompute

member

Activity: 112

Merit: 10

Quote from: shuttwind215 on July 29, 2014, 02:38:02 PM

YACoin:
cudaminer.exe -l K430x8 -o stratum+tcp://yac.coinmine.pl:9088 -u censored.censored -p censored --algo=scrypt-jane:YAC
Gainward GTX 650 non-ti 1GB gddr5 Revision A2 128Bit buss not oc-ed installed all newest CUDA etc. drivers
K430x8 was found automaticly
Here is a pic of error message:

If you run with auto-tune do you get any errors ??

tbearhere

legendary

Activity: 3164

Merit: 1003

Quote from: Breadpudding on July 29, 2014, 02:24:59 PM

Just to make sure, you put the pause command on a new line right?

Quote from: tbearhere on July 29, 2014, 02:18:49 PM

i looked at everything and the pause command wont work either it doesn't make any sense i dont know

its not recognized as an internal or external command....my bat file

shuttwind215

newbie

Activity: 4

Merit: 0

YACoin:
cudaminer.exe -l K430x8 -o stratum+tcp://yac.coinmine.pl:9088 -u censored.censored -p censored --algo=scrypt-jane:YAC
Gainward GTX 650 non-ti 1GB gddr5 Revision A2 128Bit buss not oc-ed installed all newest CUDA etc. drivers
K430x8 was found automaticly
Here is a pic of error message:
https://i.imgur.com/PWYWE3K.png?1

tbearhere

legendary

Activity: 3164

Merit: 1003

Quote from: Breadpudding on July 29, 2014, 02:24:59 PM

Just to make sure, you put the pause command on a new line right?

Quote from: tbearhere on July 29, 2014, 02:18:49 PM

i looked at everything and the pause command wont work either it doesn't make any sense i dont know

nvMiner65.exe -a luffa -o stratum+tcp://doom.suprnova.cc:5111 -u razorsedge.doom1 -p x -d 0,1,2,3
:pause

is that correct ?
EDIT:opens and closes
im going to download cuda and try a new file see if i dont know

everything else is fine its that algo

Breadpudding

member

Activity: 76

Merit: 12

Just to make sure, you put the pause command on a new line right?

Quote from: tbearhere on July 29, 2014, 02:18:49 PM

i looked at everything and the pause command wont work either it doesn't make any sense i dont know

tbearhere

legendary

Activity: 3164

Merit: 1003

Quote from: djm34 on July 29, 2014, 02:03:10 PM

Quote from: tbearhere on July 29, 2014, 01:52:34 PM

Quote from: Breadpudding on July 29, 2014, 01:42:11 PM

luffa is also in djm34's ccminer.

https://mega.co.nz/#!oFdSBDoQ!6b7UZVYvPe2BXAagCAWlSEYKUK4-EMKsIJ0ODYZIsZs

I ran your .bat on my win 7 machine, and it had the capital 'M'.

no no go im going to start all over and give that a try. i dont get it b back

it doesn't matter, I put a capital letter in my ccminer command line, it runs as usual... actually MS still doesn't know about capital letter...
if this application closes and exits right away, it means a command isn't recognized.
You need to write in your bat file pause after the command line, the windows won't disappear...

i looked at everything and the pause command wont work either it doesn't make any sense i dont know

ilovecudacompute

member

Activity: 112

Merit: 10

Quote from: ?? on ??

Improved my BBR miner (nsfw as always): https://ottrbutt.com/tmp/bbrcudaminer2.png

790kh/s, 750Ti @ stock clocks Cheesy

Impressive....also i dont have any problems with the new nvidia drivers....i start to worry about it Grin

djm34

legendary

Activity: 1400

Merit: 1050

Quote from: tbearhere on July 29, 2014, 01:52:34 PM

Quote from: Breadpudding on July 29, 2014, 01:42:11 PM

luffa is also in djm34's ccminer.

https://mega.co.nz/#!oFdSBDoQ!6b7UZVYvPe2BXAagCAWlSEYKUK4-EMKsIJ0ODYZIsZs

I ran your .bat on my win 7 machine, and it had the capital 'M'.

no no go im going to start all over and give that a try. i dont get it b back

it doesn't matter, I put a capital letter in my ccminer command line, it runs as usual... actually MS still doesn't know about capital letter...
if this application closes and exits right away, it means a command isn't recognized.
You need to write in your bat file pause after the command line, the windows won't disappear...

Equitum

newbie

Activity: 29

Merit: 0

It seems like the difficulty threshold on suprnova being as low as it is is tripping their share spoofing detector or something... I only get about a minute and a half where the miner shares are accepted (both with djm's miner and nvMiner-D7), and then every share is rejected.

Edit: Seems the suprnova guys are onto the issue! https://bitcointalksearch.org/topic/m.8089093

Edit2: Seems they overshot on the difficulty... A bit too high for my rig at least.

tbearhere

legendary

Activity: 3164

Merit: 1003

Quote from: Breadpudding on July 29, 2014, 01:42:11 PM

luffa is also in djm34's ccminer.

https://mega.co.nz/#!oFdSBDoQ!6b7UZVYvPe2BXAagCAWlSEYKUK4-EMKsIJ0ODYZIsZs

I ran your .bat on my win 7 machine, and it had the capital 'M'.

no no go im going to start all over and give that a try. i dont get it b back

Breadpudding

member

Activity: 76

Merit: 12

Hm, using the both new miners with luffa i'm still only getting 56.5Mhs with the new 340.52 drivers, with overclocking on both the SuprNova pool & solo mining. I also did a complete shutdown. Any tips on how I get get that 66Mhs speed that djm34 posted?

Topic: [ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX] - page 208. (Read 3426932 times)