Topic: [ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX] - page 232. (Read 3426936 times)
July 21, 2014, 10:57:30 PM
Getting 4300 avg on EVGA 750TI SC version.
July 21, 2014, 10:42:33 PM
I think this algo if fully optimized will have double the speed ? Currently the watt usage is very very low. Its using very low power. Usually if a algo is using very low power means it can be optimized. i believe all algo should use the same amount of power if fully optimized. Not sure if my logic is correct. I am no programmer.
What speeds are you getting with your 750ti..? I'm getting ~4,3--4,5m per card (mostly msi's)
July 21, 2014, 10:34:59 PM
ccminer with whirlcoin support: https://github.com/djm34/ccminer
donation FrsvZzCqxkhQxfua31BggEeTdTXUcpy2JL
donation FrsvZzCqxkhQxfua31BggEeTdTXUcpy2JL
A BIG thanks djm!
I have been solomining the coin today, but ironically the blocks I've found so far are from CPU solo. But letting the GPUs work now instead, hoping to find a few. Will donate if (when!) I getting lucky
Did you get the GPU bounty they had?
July 21, 2014, 09:53:30 PM
can someone upload a working whirlpool ccminer with all the files needed to run ? The link provided only has 1 file. Also , i try replace my existing ccminer.exe and run it give me an error
The program cannot start because libcurl.dll is missing
I uploaded two links (one which wasn't working on pool with all libraries and the one you got with the only the exe but working on pools to be used with the rest of the link... sorry but it takes ages to upload stuff... the reason why I avoid uploading twice...)The program cannot start because libcurl.dll is missing
the one your are missing: https://mega.co.nz/#!9A0UAagA!g53CIKQpaNm2MxEMR7iFGcoIgoMf3B2fhZ8EeFy9TMI (work on solo and p2pool)
the one you have: https://mega.co.nz/#!xFtRHTAA!LN-UuJsnXtExaj3BS0-DbEN1Op1q_nvcrPU_8Ri21tc (exe only working on pools)
Thanks. Its working now.
I think this algo if fully optimized will have double the speed ? Currently the watt usage is very very low. Its using very low power. Usually if a algo is using very low power means it can be optimized. i believe all algo should use the same amount of power if fully optimized. Not sure if my logic is correct. I am no programmer.
July 21, 2014, 09:39:16 PM
Thank you Djm34. This seems to be a good algo for my 750 ti's
July 21, 2014, 09:01:59 PM
can someone upload a working whirlpool ccminer with all the files needed to run ? The link provided only has 1 file. Also , i try replace my existing ccminer.exe and run it give me an error
The program cannot start because libcurl.dll is missing
I uploaded two links (one which wasn't working on pool with all libraries and the one you got with the only the exe but working on pools to be used with the rest of the link... sorry but it takes ages to upload stuff... the reason why I avoid uploading twice...)The program cannot start because libcurl.dll is missing
the one your are missing: https://mega.co.nz/#!9A0UAagA!g53CIKQpaNm2MxEMR7iFGcoIgoMf3B2fhZ8EeFy9TMI (work on solo and p2pool)
the one you have: https://mega.co.nz/#!xFtRHTAA!LN-UuJsnXtExaj3BS0-DbEN1Op1q_nvcrPU_8Ri21tc (exe only working on pools)
fixed
July 21, 2014, 08:45:38 PM
can someone upload a working whirlpool ccminer with all the files needed to run ? The link provided only has 1 file. Also , i try replace my existing ccminer.exe and run it give me an error
The program cannot start because libcurl.dll is missing
I uploaded two links (one which wasn't working on pool with all libraries and the one you got with the only the exe but working on pools to be used with the rest of the link... sorry but it takes ages to upload stuff... the reason why I avoid uploading twice...)The program cannot start because libcurl.dll is missing
the one your are missing: https://mega.co.nz/#!9A0UAagA!g53CIKQpaNm2MxEMR7iFGcoIgoMf3B2fhZ8EeFy9TMI (work on solo and p2pool)
the one you have: https://mega.co.nz/#!xFtRHTAA!LN-UuJsnXtExaj3BS0-DbEN1Op1q_nvcrPU_8Ri21tc (exe only working on pools)
July 21, 2014, 08:28:56 PM
can someone upload a working whirlpool ccminer with all the files needed to run ? The link provided only has 1 file. Also , i try replace my existing ccminer.exe and run it give me an error
The program cannot start because libcurl.dll is missing
I uploaded two links (one which wasn't working on pool with all libraries and the one you got with the only the exe but working on pools to be used with the rest of the link... sorry but it takes ages to upload stuff... the reason why I avoid uploading twice...)The program cannot start because libcurl.dll is missing
the one your are missing: https://mega.co.nz/#!9A0UAagA!g53CIKQpaNm2MxEMR7iFGcoIgoMf3B2fhZ8EeFy9TMI (work on solo and p2pool)
the one you have: https://mega.co.nz/#!xFtRHTAA!LN-UuJsnXtExaj3BS0-DbEN1Op1q_nvcrPU_8Ri21tc (exe only working on pools)
July 21, 2014, 08:07:51 PM
can someone upload a working whirlpool ccminer with all the files needed to run ? The link provided only has 1 file. Also , i try replace my existing ccminer.exe and run it give me an error
The program cannot start because libcurl.dll is missing
I uploaded two links (one which wasn't working on pool with all libraries and the one you got with the only the exe but working on pools to be used with the rest of the link... sorry but it takes ages to upload stuff... the reason why I avoid uploading twice...)The program cannot start because libcurl.dll is missing
the one your are missing: https://mega.co.nz/#!9A0UAagA!g53CIKQpaNm2MxEMR7iFGcoIgoMf3B2fhZ8EeFy9TMI (work on solo and p2pool)
the one you have: https://mega.co.nz/#!xFtRHTAA!LN-UuJsnXtExaj3BS0-DbEN1Op1q_nvcrPU_8Ri21tc (exe only working on pools)
July 21, 2014, 07:55:41 PM
can someone upload a working whirlpool ccminer with all the files needed to run ? The link provided only has 1 file. Also , i try replace my existing ccminer.exe and run it give me an error
The program cannot start because libcurl.dll is missing
The program cannot start because libcurl.dll is missing
July 21, 2014, 06:41:33 PM
Does anyone mine JPC @ dwarfpool and get a lot of "booo's" ? Since three days or so (since the fork), I only get like 88-90% good shares shown in the console (ubuntu 14.04 x64). But the admin of dwarfpool checked my shares, and they are up to 100% accepted. Why does it show only ~90% good shares on my side, but on the pool everything I send is accepted? Never had that problem with JPC before.
July 21, 2014, 06:34:27 PM
updated github, the asm commands are back to cuda_helper.h
(lost an sbox in the process, but I didn't really see any differences... though)
(lost an sbox in the process, but I didn't really see any differences... though)
July 21, 2014, 05:32:06 PM
Still compiling...
And I'm compiling my own edit (just replaced all occurences of "xor"), not the version currently on github.
crap, my edit didn't work. probably shouldn't used "replace all". trying github.
install 6.0 ot 6.5 (it is really a lot faster... I compiled an exe this afternoon by mistake with 5.5 it took about 2 hours... with 6.5, it takes only half hours and certainly a lot less on Amph computer...)And I'm compiling my own edit (just replaced all occurences of "xor"), not the version currently on github.
crap, my edit didn't work. probably shouldn't used "replace all". trying github.
for the xor there are 32 occurences (replace all told me that... actually only 7 gives a boost...)
I believed I had 6.0 installed, but seems like I had 5.5 as well and the compile uses that one. I'll try and clean it up.
Just removed everything and installed 6.0 again. Seems to use the proper nvcc now. Thanks for the heads up.
July 21, 2014, 05:26:53 PM
Still compiling...
And I'm compiling my own edit (just replaced all occurences of "xor"), not the version currently on github.
crap, my edit didn't work. probably shouldn't used "replace all". trying github.
install 6.0 ot 6.5 (it is really a lot faster... I compiled an exe this afternoon by mistake with 5.5 it took about 2 hours... with 6.5, it takes only half hours and certainly a lot less on Amph computer...)And I'm compiling my own edit (just replaced all occurences of "xor"), not the version currently on github.
crap, my edit didn't work. probably shouldn't used "replace all". trying github.
for the xor there are 32 occurences (replace all told me that... actually only 7 gives a boost...)
I believed I had 6.0 installed, but seems like I had 5.5 as well and the compile uses that one. I'll try and clean it up.
July 21, 2014, 05:24:18 PM
Still compiling...
And I'm compiling my own edit (just replaced all occurences of "xor"), not the version currently on github.
crap, my edit didn't work. probably shouldn't used "replace all". trying github.
install 6.0 ot 6.5 (it is really a lot faster... I compiled an exe this afternoon by mistake with 5.5 it took about 2 hours... with 6.5, it takes only half hours and certainly a lot less on Amph computer...)And I'm compiling my own edit (just replaced all occurences of "xor"), not the version currently on github.
crap, my edit didn't work. probably shouldn't used "replace all". trying github.
for the xor there are 32 occurences (replace all told me that... actually only 7 gives a boost...)
I believed I had 6.0 installed, but seems like I had 5.5 as well and the compile uses that one. I'll try and clean it up.
July 21, 2014, 05:16:12 PM
ccminer with whirlcoin support: https://github.com/djm34/ccminer
donation FrsvZzCqxkhQxfua31BggEeTdTXUcpy2JL
donation FrsvZzCqxkhQxfua31BggEeTdTXUcpy2JL
THANKS
will donate of course Actually for some strange reason, it seems it is a cuda coin
(it is strange because it isn't well optimised, but it does a lot worst on amd
)by the way you can try to change maxregcount to 64.
that will increase the occupancy and should give a little boost
(the problem is that some bytes are spilled... and that cause some perf. loss, but the gain from the highest occupancy is higher than the loss from the registers...)
July 21, 2014, 05:12:26 PM
Still compiling...
And I'm compiling my own edit (just replaced all occurences of "xor"), not the version currently on github.
crap, my edit didn't work. probably shouldn't used "replace all". trying github.
install 6.0 ot 6.5 (it is really a lot faster... I compiled an exe this afternoon by mistake with 5.5 it took about 2 hours... with 6.5, it takes only half hours and certainly a lot less on Amph computer...)And I'm compiling my own edit (just replaced all occurences of "xor"), not the version currently on github.
crap, my edit didn't work. probably shouldn't used "replace all". trying github.
for the xor there are 32 occurences (replace all told me that... actually only 7 gives a boost...)
July 21, 2014, 04:54:04 PM
ccminer with whirlcoin support: https://github.com/djm34/ccminer
donation FrsvZzCqxkhQxfua31BggEeTdTXUcpy2JL
donation FrsvZzCqxkhQxfua31BggEeTdTXUcpy2JL
THANKS
will donate of course 
July 21, 2014, 04:46:10 PM
Still compiling...
And I'm compiling my own edit (just replaced all occurences of "xor"), not the version currently on github.
crap, my edit didn't work. probably shouldn't used "replace all". trying github.
And I'm compiling my own edit (just replaced all occurences of "xor"), not the version currently on github.
crap, my edit didn't work. probably shouldn't used "replace all". trying github.
Compiling at the moment, Will tell you if it works fine :-P
July 21, 2014, 04:34:00 PM
Still compiling...
And I'm compiling my own edit (just replaced all occurences of "xor"), not the version currently on github.
crap, my edit didn't work. probably shouldn't used "replace all". trying github.
And I'm compiling my own edit (just replaced all occurences of "xor"), not the version currently on github.
crap, my edit didn't work. probably shouldn't used "replace all". trying github.
Jump to: