[ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX] - page 245.

cayars

full member

Activity: 168

Merit: 100

Quote from: DougB62 on July 15, 2014, 06:21:01 AM

@cayars: I have been using nvminer since a day or so after you released it, and everything has been fine. However, yesterday, it suddenly started incorrectly reporting all my cards as GTX 660's (I have 2x EVGA GTX 660's and 2x EVGA GTX 750Ti's). It had been reporting correctly all the time before it started this. All of the other versions that I have (I have most of them) are still reporting correctly. Re-booting the system, and disabling/re-enabling the cards have had no effect on this behavior. Any ideas???

That is strange indeed. My gut feeling is that it's a driver issue/glitch.

What does GPU-Z report as the card type?

zelante

full member

Activity: 263

Merit: 100

8 days from miner start
nice to see this stability in windows 8.1 Cool

DougB62

hero member

Activity: 672

Merit: 500

Banned: For Your Protection

@cayars: I have been using nvminer since a day or so after you released it, and everything has been fine. However, yesterday, it suddenly started incorrectly reporting all my cards as GTX 660's (I have 2x EVGA GTX 660's and 2x EVGA GTX 750Ti's). It had been reporting correctly all the time before it started this. All of the other versions that I have (I have most of them) are still reporting correctly. Re-booting the system, and disabling/re-enabling the cards have had no effect on this behavior. Any ideas???

PVmining

sr. member

Activity: 330

Merit: 252

Quote from: erotavlas on July 15, 2014, 03:56:33 AM

I'm new of mining and bitcoin. I would like to know if mining is still profitable in term earning/cost (hardware and electricity). I have three video cards and solar panels, but I don't want to waste energy. The video cards are: nvidia geforce gtx Titan GK110, geforce gtx 670 GK104 and geforce 8400 gt

-. What is the best software for mining on linux? Cudaminer or cgminer?

I found that the best parameters for Titan are these cudaminer -r 10 -R 30 -T 30 -H 1 -i 0 -m 1 -d 0 -l K14x32 --no-autotune or these cudaminer -d 0 -i 0 -C 2 -l K14x18.
What is the best mining pool?

Thank you

its not that easy to start. first you have to decide which coin / algo you would like to mine.
the profitablity varys a lot. then you have to use the right miner for the coin/algo... ccminer or cudaminer.
for a first impression if it could be profitable for you take a look at http://whatmine.com/ - but use the right numbers for your hardware (--benchmark) and the right values for power consumption.

bigjme

sr. member

Activity: 350

Merit: 250

if your mining with nvidia then you should ALWAYS be using ccminer or cudaminer

Again a notice to the following people

Amph
Bombadil
Cbuchner1
tsiv
zelante

Message me for your login details to cudamining.cc
So far cayars has his and has been using it, i like the new description for your release by the way Wink

djm34 has his logins but has yet to submit anything

erotavlas

newbie

Activity: 3

Merit: 0

I'm new of mining and bitcoin. I would like to know if mining is still profitable in term earning/cost (hardware and electricity). I have three video cards and solar panels, but I don't want to waste energy. The video cards are: nvidia geforce gtx Titan GK110, geforce gtx 670 GK104 and geforce 8400 gt

-. What is the best software for mining on linux? Cudaminer or cgminer?

I found that the best parameters for Titan are these cudaminer -r 10 -R 30 -T 30 -H 1 -i 0 -m 1 -d 0 -l K14x32 --no-autotune or these cudaminer -d 0 -i 0 -C 2 -l K14x18.
What is the best mining pool?

Thank you

miner256

newbie

Activity: 23

Merit: 0

Just for interest here is what I am getting at the moment. On a 750 GTX Ti running djm34's latest fork off ccminer (https://github.com/djm34/ccminer) compiled with CUDA 6.0.
Per card of course, and rounded down.

X11 2,300k/s
X13 1,800k/s (about 50w)
x15 1,200k/s
Nist5 7,500k/s (about 54w)

I have tried various versions with CUDA 6.0 and 5.5 but its really hard to see any difference.

I am sticking on TradeMyBit at the moment with a homemade switcher that is flipping between X13 and Nist5 most of the time

Quote from: DiggerPhil on July 15, 2014, 12:57:51 AM

Quote from: Newwsr on July 14, 2014, 11:48:59 PM

I'm using this Mod v1.02-X13-version - 12/06/2014 she works for x11 x13 and x11 doing more in 2.200k / s

I can't recall if v1.02 contains the improved groestl implementation. Give v1.2 a try and you might see an improvement with both x11 and x13.

DiggerPhil

newbie

Activity: 18

Merit: 0

Quote from: Newwsr on July 14, 2014, 11:48:59 PM

I'm using this Mod v1.02-X13-version - 12/06/2014 she works for x11 x13 and x11 doing more in 2.200k / s

I can't recall if v1.02 contains the improved groestl implementation. Give v1.2 a try and you might see an improvement with both x11 and x13.

Newwsr

sr. member

Activity: 311

Merit: 250

I'm using this Mod v1.02-X13-version - 12/06/2014 she works for x11 x13 and x11 doing more in 2.200k / s

DiggerPhil

newbie

Activity: 18

Merit: 0

Quote from: Newwsr on July 14, 2014, 06:21:59 PM

Quote from: cayars on July 14, 2014, 12:14:05 PM

Did you read the OP message?

Installation requirements:
- a recent nVidia driver supporting at least CUDA 5.5
- Visual Studio 2010 SP1 redistributable (redist). Install when MSVCR100.DLL is not found.
http://www.microsoft.com/de-de/download/details.aspx?id=8328 (x86)
http://www.microsoft.com/de-de/download/details.aspx?id=13523 (x64)

Install both of them and it should work for you. If not reboot and try again.

Carlo

It worked thank you friend.

Another question as I leave in EVGAPrecisionX min to make overclocking the card and a evga 750ti SC, as I leave the over clock?

Here is giving 2,200 K / s to do to reach the 2,700 k / s x11

Which version are you using? 1.1 and above should have the "enhanced" x11 implementation. I believe 1.2 should have both x13 and the enhanced x11. nvMiner should have it all but I have never used it so can't say for sure.

Newwsr

sr. member

Activity: 311

Merit: 250

Quote from: cayars on July 14, 2014, 12:14:05 PM

Did you read the OP message?

Installation requirements:
- a recent nVidia driver supporting at least CUDA 5.5
- Visual Studio 2010 SP1 redistributable (redist). Install when MSVCR100.DLL is not found.
http://www.microsoft.com/de-de/download/details.aspx?id=8328 (x86)
http://www.microsoft.com/de-de/download/details.aspx?id=13523 (x64)

Install both of them and it should work for you. If not reboot and try again.

Carlo

It worked thank you friend.

Another question as I leave in EVGAPrecisionX min to make overclocking the card and a evga 750ti SC, as I leave the over clock?

Here is giving 2,200 K / s to do to reach the 2,700 k / s x11

cayars

full member

Activity: 168

Merit: 100

Did you read the OP message?

Installation requirements:
- a recent nVidia driver supporting at least CUDA 5.5
- Visual Studio 2010 SP1 redistributable (redist). Install when MSVCR100.DLL is not found.
http://www.microsoft.com/de-de/download/details.aspx?id=8328 (x86)
http://www.microsoft.com/de-de/download/details.aspx?id=13523 (x64)

Install both of them and it should work for you. If not reboot and try again.

Carlo

Newwsr

sr. member

Activity: 311

Merit: 250

Quote from: cayars on July 14, 2014, 10:39:01 AM

Quote from: Newwsr on July 14, 2014, 10:36:35 AM

Quote from: Zels on July 14, 2014, 10:22:20 AM

Quote from: Newwsr on July 14, 2014, 10:20:30 AM

hello guys bought some 750ti which ccminer use x13 for which confi put on. bat

thank you

ccminer -a x13 -o yourpoll -u yourworker -p yourpassword

which ccminer download for x13?
thank you

http://cudamining.cc/url/releases

msvcr100.dll is giving this error more installed Visual C + +

cayars

full member

Activity: 168

Merit: 100

Quote from: Newwsr on July 14, 2014, 10:36:35 AM

Quote from: Zels on July 14, 2014, 10:22:20 AM

Quote from: Newwsr on July 14, 2014, 10:20:30 AM

hello guys bought some 750ti which ccminer use x13 for which confi put on. bat

thank you

ccminer -a x13 -o yourpoll -u yourworker -p yourpassword

which ccminer download for x13?
thank you

http://cudamining.cc/url/releases

Newwsr

sr. member

Activity: 311

Merit: 250

Quote from: Zels on July 14, 2014, 10:22:20 AM

Quote from: Newwsr on July 14, 2014, 10:20:30 AM

hello guys bought some 750ti which ccminer use x13 for which confi put on. bat

thank you

ccminer -a x13 -o yourpoll -u yourworker -p yourpassword

which ccminer download for x13?
thank you

Zels

full member

Activity: 203

Merit: 100

Quote from: Newwsr on July 14, 2014, 10:20:30 AM

hello guys bought some 750ti which ccminer use x13 for which confi put on. bat

thank you

ccminer -a x13 -o yourpoll -u yourworker -p yourpassword

Newwsr

sr. member

Activity: 311

Merit: 250

hello guys bought some 750ti which ccminer use x13 for which confi put on. bat

thank you

Newwsr

sr. member

Activity: 311

Merit: 250

which configuration to use a 750ti SC on x13

bigjme

sr. member

Activity: 350

Merit: 250

hey, did noone want to tell me about the error message on cudamining.cc if you weren't logged in? been there since friday? Sad

been fixed now for anyone that noticed

djm34

legendary

Activity: 1400

Merit: 1050

Quote from: coke15 on July 14, 2014, 05:41:30 AM

Quote from: GarlukKY on July 13, 2014, 02:24:19 PM

Quote from: coke15 on July 13, 2014, 12:10:35 PM

hi

when i see, on 750ti, 12 mhs myr groestl pour 30-35 w ,
possible to optimize ccminer to get the max tdp 70W ?
wait for new nvidia drivers? it they want to optimize them to minage?

I think what he is asking is when will ccminer get optimized to pull closer to its max tdp thereby increasing the hash rate.

If I remember correctly, part of the groestl algo gets pushed onto the cpu, which is why the power consumption on JPC fluctuates. If this is correct, you'll never see max tdp on myr-grs as its faster to do some of the computing on the cpu.

I stand corrected Grin

hi this is what i mean

hope 20 mh groestl ,5 mh for x11 .... for 70w power?

don't dream too much though Grin

I think you could gain a few percents may-be... More power means you will have more power to sustain higher core clock without throttling (but obviously there are some limits to what you can put on the core clock).

Topic: [ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX] - page 245. (Read 3426936 times)