[ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX] - page 275.

djm34

legendary

Activity: 1400

Merit: 1050

Quote from: Agamemnus on July 03, 2014, 06:03:49 PM

Any chance of seeing an algo-switching feature?

sgminer currently supports this, for example using with NiceHash you can see the config here: https://www.nicehash.com/multialgo/

nicehash guy rewrote everything... (so basically it's up to them)
sgminer has never been simple in terms of parameter, they did very well at complicating even more sgminer...

Agamemnus

full member

Activity: 267

Merit: 100

Any chance of seeing an algo-switching feature?

sgminer currently supports this, for example using with NiceHash you can see the config here: https://www.nicehash.com/multialgo/

cbuchner1

hero member

Activity: 756

Merit: 502

Quote from: AizenSou on July 03, 2014, 04:53:35 PM

You got a bar in Munich which accepts BTC? Cool. What's the name of this bar? I will try this too.

"Niederlassung", near U Bahn Station Fraunhoferstr.

AizenSou

hero member

Activity: 938

Merit: 1000

Quote from: cbuchner1 on July 03, 2014, 04:41:13 PM

Quote from: djm34 on July 03, 2014, 04:31:44 PM

How does it work ? (when it works)
does the bar accept bitcoin ?

you walk to the cash register, the cashier types in the amount on some touch LCD screen, you scan the resulting QR code and confirm the payment on your mobile device.

And when it doesn't work, you either shell out some hard cash or get to wash the dishes Wink

Christian

You got a bar in Munich which accepts BTC? Cool. What's the name of this bar? I will try this too.

cbuchner1

hero member

Activity: 756

Merit: 502

Quote from: djm34 on July 03, 2014, 04:31:44 PM

How does it work ? (when it works)
does the bar accept bitcoin ?

you walk to the cash register, the cashier types in the amount on some touch LCD screen, you scan the resulting QR code and confirm the payment on your mobile device.

And when it doesn't work, you either shell out some hard cash or get to wash the dishes Wink

Christian

djm34

legendary

Activity: 1400

Merit: 1050

Quote from: cbuchner1 on July 03, 2014, 04:20:59 PM

Tried to paid for a few beer and longdrinks in bitcoins tonight. Didn't work because the stupid Windows Phone software confused decimal dot and comma in the German version of Windows phone. After 2 embarassing attempts that ended in a failure message, I shelled out 30 Euros in cash.

Oh well... the sad sad state of Windows Phone. Of course switching the whole phone over to US English localization would have worked.

How does it work ? (when it works)
does the bar accept bitcoin ?

cbuchner1

hero member

Activity: 756

Merit: 502

Tried to paid for a few beer and longdrinks in bitcoins tonight. Didn't work because the stupid Windows Phone wallet software confused decimal dot and comma in the German version of Windows phone. After 2 embarassing attempts that ended in a failure message, I shelled out 30 Euros in cash.

Oh well... the sad sad state of Windows Phone. Of course switching the entire phone over to US English localization would have worked.

djm34

legendary

Activity: 1400

Merit: 1050

Quote from: S_tring on July 03, 2014, 03:30:31 PM

I'm trying to compile djm's X15 miner on Ubuntu, but seems to be hanging at this :

Quote

ptxas warning : 'option -abi=no' might get deprecated in future
ptxas warning : Too big maxrregcount value specified 80, will be ignored
ptxas info : 0 bytes gmem, 80 bytes cmem[3]
ptxas info : Compiling entry function '_Z28x13_whirlpool512_gpu_hash_64ijPmPj' for 'sm_30'
ptxas info : Used 63 registers, 376 bytes cmem[0], 44 bytes lmem
x13/cuda_whirlpool512.cu(59): warning: function "HIWORD" was declared but never referenced

x13/cuda_whirlpool512.cu(68): warning: function "REPLACE_HIWORD" was declared but never referenced

x13/cuda_whirlpool512.cu(73): warning: function "LOWORD" was declared but never referenced

x13/cuda_whirlpool512.cu(91): warning: function "REPLACE_LOWORD" was declared but never referenced

Do I wait it out? I'm sure I read that this version takes a while to compile, but it seems to have hung here for quite a while. Huh

it's normal (sort of)... if you watch mem usage of the process you will see it increase...

S_tring

full member

Activity: 252

Merit: 102

OPEN Platform - Powering Blockchain Acceptance

I'm trying to compile djm's X15 miner on Ubuntu, but seems to be hanging at this :

Quote

ptxas warning : 'option -abi=no' might get deprecated in future
ptxas warning : Too big maxrregcount value specified 80, will be ignored
ptxas info : 0 bytes gmem, 80 bytes cmem[3]
ptxas info : Compiling entry function '_Z28x13_whirlpool512_gpu_hash_64ijPmPj' for 'sm_30'
ptxas info : Used 63 registers, 376 bytes cmem[0], 44 bytes lmem
x13/cuda_whirlpool512.cu(59): warning: function "HIWORD" was declared but never referenced

x13/cuda_whirlpool512.cu(68): warning: function "REPLACE_HIWORD" was declared but never referenced

x13/cuda_whirlpool512.cu(73): warning: function "LOWORD" was declared but never referenced

x13/cuda_whirlpool512.cu(91): warning: function "REPLACE_LOWORD" was declared but never referenced

Do I wait it out? I'm sure I read that this version takes a while to compile, but it seems to have hung here for quite a while. Huh

djm34

legendary

Activity: 1400

Merit: 1050

Quote from: RavenXBR on July 03, 2014, 02:50:32 PM

Quote from: italeffect on July 03, 2014, 01:59:13 PM

Quote from: RavenXBR on July 02, 2014, 09:18:03 PM

Quote from: coinits on July 02, 2014, 09:05:45 PM

So I have finally got my first mining rig built using 4 X 750ti from Gigabyte. I am testing with Jackpot Coin to see what is what. Can some of you give me what you get for hashrates. I am currently getting 20.6 - 21.7 mh/s total or 5.15-5.43 mh/s per card.

Must say for a noob this is pretty sweet. Time for a beer!

A few posts before I mentioned my rates for a rig same as yours.

I'm getting 5.1~5.3 per card.

Wink

What's the wattage use look like for this? Is is comparable to x11/13/15?

JPC draws around 10% more than X's algos.

My 4 750 rig draws ~250W at wall for x15 and ~275W for JPC (monitor off in both cases).

don't forget to turn off the light while mining jpc.... Grin

RavenXBR

full member

Activity: 140

Merit: 100

Quote from: italeffect on July 03, 2014, 01:59:13 PM

Quote from: RavenXBR on July 02, 2014, 09:18:03 PM

Quote from: coinits on July 02, 2014, 09:05:45 PM

So I have finally got my first mining rig built using 4 X 750ti from Gigabyte. I am testing with Jackpot Coin to see what is what. Can some of you give me what you get for hashrates. I am currently getting 20.6 - 21.7 mh/s total or 5.15-5.43 mh/s per card.

Must say for a noob this is pretty sweet. Time for a beer!

A few posts before I mentioned my rates for a rig same as yours.

I'm getting 5.1~5.3 per card.

Wink

What's the wattage use look like for this? Is is comparable to x11/13/15?

JPC draws around 10% more than X's algos.

My 4 750 rig draws ~250W at wall for x15 and ~275W for JPC (monitor off in both cases).

sparks2013

newbie

Activity: 55

Merit: 0

Quote from: RavenXBR on July 03, 2014, 01:53:24 PM

Quote from: sparks2013 on July 03, 2014, 01:40:51 PM

Ok, just installed my two Gigabyte 750 Ti cards. Getting decent hash rates @ 230H/s with -l 8x60.

The only strange things is, and this may be a silly question.. but I installed Gigabyte OC Guru 2 and its showing my GPU clock at 1359Mhz while my Base / Boost is 1215 / 1294.

Is this normal?

Try MSI Afterburner or EVGA Precision X instead of OC Guru 2, they give a better hashrate (I use the second).
I've also tried Guru when I bought my first Gigabyte 750 and could not achieve the rates people were achieving.

Wink

Thanks for the info, but I haven't even started overclocking or anything. I'm just using the app for monitoring as of right now..

As a side note, i've actually installed MSI afterburner and this is also reporting 1359mhz for the GPU clock, when the cards spec's read 1294. Which is the exact same that OC Guru is showing also.. I'm not complaining, i'm just wondering why this is.. lol

italeffect

sr. member

Activity: 255

Merit: 250

Quote from: RavenXBR on July 02, 2014, 09:18:03 PM

Quote from: coinits on July 02, 2014, 09:05:45 PM

So I have finally got my first mining rig built using 4 X 750ti from Gigabyte. I am testing with Jackpot Coin to see what is what. Can some of you give me what you get for hashrates. I am currently getting 20.6 - 21.7 mh/s total or 5.15-5.43 mh/s per card.

Must say for a noob this is pretty sweet. Time for a beer!

A few posts before I mentioned my rates for a rig same as yours.

I'm getting 5.1~5.3 per card.

Wink

What's the wattage use look like for this? Is is comparable to x11/13/15?

RavenXBR

full member

Activity: 140

Merit: 100

Quote from: sparks2013 on July 03, 2014, 01:40:51 PM

Ok, just installed my two Gigabyte 750 Ti cards. Getting decent hash rates @ 230H/s with -l 8x60.

The only strange things is, and this may be a silly question.. but I installed Gigabyte OC Guru 2 and its showing my GPU clock at 1359Mhz while my Base / Boost is 1215 / 1294.

Is this normal?

Try MSI Afterburner or EVGA Precision X instead of OC Guru 2, they give a better hashrate (I use the second).
I've also tried Guru when I bought my first Gigabyte 750 and could not achieve the rates people were achieving.

Wink

sparks2013

newbie

Activity: 55

Merit: 0

Ok, just installed my two Gigabyte 750 Ti cards. Getting decent hash rates @ 230H/s with -l 8x60.

The only strange things is, and this may be a silly question.. but I installed Gigabyte OC Guru 2 and its showing my GPU clock at 1359Mhz while my Base / Boost is 1215 / 1294.

Is this normal?

RavenXBR

full member

Activity: 140

Merit: 100