Topic: [ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX] - page 495. (Read 3426976 times)

i guess

ccminer30.exe -a x11 -d gtx760 -o pool:port -O worker.user:password

or

ccminer30.exe -a x11 -d 0 -o pool:port -O worker.user:password

try it.


EDIT:
And look in the ccminer "READ ME" file for extra info , it is located in the program files folder of ccminer.

tell please command line for GTX760 and ccminer...

--debug  or -D in .bat will show diff  


EDIT:

can --interactive , -i  be added to ccminer ?
just like cudaminer has that option?

i wonder if that will improve my performance .
if i set -i 0

but ccminer does not understand the code yet.

i guess thats the price to pay for using windows (10% reduce performance)

no, it's linux OS ready for mining (Kubuntu based)
but it's extremaly simple to start and use, even you are not familiar with Linux yet

Since Blake is in cudaminer, and also used in ccminer by other algos.
Is there a difference of speed between the implementation in cudaminer and the one in ccminer ?

it would be great if ccminer shows current difficulties.

100% confirm. When not observing rig using remote access, card run at around 85% and running at stable 1.68 - 1.7 mh. OC setting doesn't seems to affect the speed. Using +0 and +x yield the same speed. Once i remote access rig, speed change to around 1.2 mh and once i log off, it goes back to stable speed 1.68 - 1.7 mh.

does KopiemTu works on windows ?

1. Can't answer all my cards are single fans. I have 5 Evga SC and 5 Msi OC

2. In my opinion, No. These cards all over clock good with a simple overclock tool. If you buy them locally the store might price match. I get mine at Fry's and they have priced matched everyone to NewEgg or MicroCenter.

3. All mine are non 6 pin. I have read the 6 pin version gets a tad bit more juice, but you are adding more wattage. So for me I perfer the Non 6 Pins.

4. I had mixed mine before I got 5 per card in the same rig. Just use the Overclock utility and you will be ok. I use Evga Precision. I use the fan controller to put each fan at 100% to test what cards are where. Then throttle it back down. In my instance for some reason Windows 7 does not detect them in order of 1-5 in the slots.

5. My favorite has been the Evga OC. Personally I am staying away from Asus for now on. I have 3 AMD cards from them and the fans are so much smaller that when they crank up on rpm's the noise is very, very audible. I can litterally put the MSI or EVGA next to my bed and you will barely here them. I don't have them in there but just to give you a comparison.

Last thing. One word of advice and it is VERY important.When installing them you do not need a super powerful PSU. BUT make sure you do not put more than 2 on one daisy chain from the power supply. I have read people who have had melted power connections. These daisy chains are not powered to run 3 or more cards on each. I have 5 on a 550 watt power supply with no issues. It has 3 seperate daisy chains and I have 2 on each and the 5th on one by itself connected to the hard drive. My biggest power supply I have is 860 watts but I only got that to be ready for the 880 when it comes out.

Which method? RDP, VNC, TeamViewer, Splashtop etc?

Try Kopiemtu then:
https://litecointalk.org/index.php?topic=16800.0

with Palit StormX Dual, factory settings:

[2014-05-12 15:08:29] Stratum detected new block
[2014-05-12 15:08:29] thread 2: 5242881 hashes, 1841 khash/s
[2014-05-12 15:08:29] thread 0: 36438017 hashes, 1845 khash/s
[2014-05-12 15:08:29] thread 1: 2490369 hashes, 1842 khash/s
[2014-05-12 15:08:32] thread 2: 5403664 hashes, 1830 khash/s
[2014-05-12 15:08:32] accepted: 1549/1551 (99.87%), 5517 khash/s (yay!!!)
[2014-05-12 15:08:33] thread 1: 6214299 hashes, 1857 khash/s
[2014-05-12 15:08:33] accepted: 1550/1552 (99.87%), 5532 khash/s (yay!!!)
[2014-05-12 15:08:37] thread 0: 14152327 hashes, 1862 khash/s
[2014-05-12 15:08:37] accepted: 1551/1553 (99.87%), 5549 khash/s (yay!!!)
[2014-05-12 15:08:40] thread 1: 13889041 hashes, 1848 khash/s
[2014-05-12 15:08:40] accepted: 1552/1554 (99.87%), 5539 khash/s (yay!!!)
[2014-05-12 15:08:47] thread 0: 18827763 hashes, 1838 khash/s
[2014-05-12 15:08:47] accepted: 1553/1555 (99.87%), 5516 khash/s (yay!!!)
[2014-05-12 15:09:03] thread 2: 56040517 hashes, 1842 khash/s
[2014-05-12 15:09:03] accepted: 1554/1556 (99.87%), 5528 khash/s (yay!!!)
[2014-05-12 15:09:24] thread 2: 38909951 hashes, 1845 khash/s
[2014-05-12 15:09:24] accepted: 1555/1557 (99.87%), 5531 khash/s (yay!!!)
[2014-05-12 15:09:31] thread 1: 93842463 hashes, 1848 khash/s
[2014-05-12 15:09:31] accepted: 1556/1558 (99.87%), 5531 khash/s (yay!!!)
[2014-05-12 15:09:42] thread 0: 101485760 hashes, 1850 khash/s
[2014-05-12 15:09:42] accepted: 1557/1559 (99.87%), 5544 khash/s (yay!!!)

BTW:

Good job, Christian!
(and looking forward for this 2.7MH/s ultimate X11 killer )

i found that when i am "not looking" at the computer, the load goes up to 85% and speed running at 1.660 mh stable. Once i remote access the computer , it immediately goes down to 1.2 mh and load change to 60% - 70%

still GPU utilization that kicks in and lowers my clocks and performance .

GPU load is low too and varies a lot .

up to 1840kH/s

try this in the .bat

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1 
ccminer35.exe -a x11 -d gtx780 -o stratum+tcp://europe1.darkcoin.miningpoolhub.com:20465 -O worker.user:password

Yes, of course I will include all above in next release

 I realize that higher GPU load higher hashrate , anyone know how to get GPU load to run 90% stable ? It keep swinging 60 - 80% average of 70%

My MSi GTX 780 Lightning  gets 2700-2800 in my miner program .
but i saw 4 Mhz on the pool website for a short moment.
it is now lower again.

my clocks are also slowly rising .
GPU utilization kicks in and lowers clocks in the beginning , then it slowly goes up.

something tells me , thats not right.
it is only doing that when it is not breaking a sweat .
so it could do better i believe.
i think the program needs a bit more tweaking .

i also get a lot of validate errors , with both ccminer30 and ccminer35, speeds are similar on both .exe

(x11)

i keep getting 70% load. Is there any additional command i need to run to get the GPU usage higher ? for example AMD have that setx gpu_max_alloc_percent , do ccminer have some sort of environment setting i need to do ?