Topic: [ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX] - page 642. (Read 3426975 times)

Close and start again in short intervals until vardiff stops being drunk and goes home.
Takes me 2-3 attempts at worst but I've found that if you leave it alone and just wait through all the boooos, it fixes itself eventually.

I had the same problem at 1gh and like DougB62 just restarted ccminer35 a few times until it worked. Christian and others have mentioned that the pool was having some difficulties. I've been running at 1gh for several hours now without any strings of boos.

Sorry so late, just got back from work. Here is my bat: cudaminer --algo=keccak -i 0 -l T1024x24 -C 2 -L 1024 -m 1  

I have core at +130 and memory +525. Getting 162,300 kh/s. I can't remember my best settings that I had. Should have wrote them down.

But hope this gets you closer.

s

I did read the README.txt and have followed it as far as I am able. I have already installed all of those dependencies.  I have even uninstalled and reinstalled automake, but that is after all of that. I have CUDA toolkit V. 5.5 and gcc V. 4.4.7

Yes - does this all the time to me. If you close the instance, then restart within a few seconds (I close it, count to three and re-launch) it always fixes this for me. Sometimes it takes three or four tries, but it has always worked.

Just realized that I posted that capture from 1gh with a modification to the string... was playing with removing the -t (threads)... tried removing the command, and -t 1, as well as trying different combinations of -d 0,1 ... tried different processors, as well as using different pairs and removing -d completely.

Nothing changes the output.

The heavycoin setup works fine with a separate CMD window for each pair of cards I am pulling 46,800 Mhash/s.

So everything seems to be working just fine, just not on 1gh.

thanks

Execute this in a terminal:

    sudo apt-get install automake

This should install automake and its dependencies, which include autoconf. This does not include gcc, CUDA toolkit, or other libraries which you may need. You did not specify whether you followed the README.txt guide that directed you to install those dependencies so I have omitted them.

Anyone having trouble with hvy.1gh.com?

The first 25 units work fine, but then everything after that is a 'boooooo'.

The same setup just with the different wallet settings works fine at heavycoin.com

ccminer35.exe -t 1 -a heavy -o stratum+tcp://stratum01.heavycoinpool.com:5333 -u login.worker -p password -v 512 -d 0,1 -q

ccminer35.exe -t 1 -a heavy -o stratum+tcp://hvcpool.1gh.com:5333 -u wallet -p x -v 512 -d 0,1 -q


C:\mining\ccminer-v0.5\x86>ccminer35.exe -a heavy -o stratum+tcp://hvcpool.1gh.c
om:5333 -u WALLET -p x -v 512 -q
     *** ccMiner for nVidia GPUs by Christian Buchner and Christian H. ***
                     This is version 0.5 (beta)
          based on pooler-cpuminer 2.3.2 (c) 2010 Jeff Garzik, 2012 pooler
          based on pooler-cpuminer extension for HVC from
               https://github.com/heavycoin/cpuminer-heavycoin
                        and
               http://hvc.1gh.com/
        Cuda additions Copyright 2014 Christian Buchner, Christian H.
          LTC donation address: LKS1WDKGED647msBQfLBHV3Ls8sveGncnm
          BTC donation address: 16hJF5mceSojnTD3ZTUDqdRhDyPJzoRakM
          YAC donation address: Y87sptDEcpLkLeAuex6qZioDbvy1qXZEj4
[2014-03-26 22:20:19] Starting Stratum on stratum+tcp://hvcpool.1gh.com:5333
[2014-03-26 22:20:19] 4 miner threads started, using 'heavy' algorithm.
[2014-03-26 22:20:20] accepted: 1/1 (100.00%), 192.44 khash/s (yay!!!)
[2014-03-26 22:20:20] accepted: 2/2 (100.00%), 1280 khash/s (yay!!!)
[2014-03-26 22:20:21] accepted: 3/3 (100.00%), 13137 khash/s (yay!!!)
[2014-03-26 22:20:21] accepted: 4/4 (100.00%), 31046 khash/s (yay!!!)
[2014-03-26 22:20:21] accepted: 5/5 (100.00%), 31046 khash/s (yay!!!)
[2014-03-26 22:20:21] accepted: 6/6 (100.00%), 27965 khash/s (yay!!!)
[2014-03-26 22:20:21] accepted: 7/7 (100.00%), 27965 khash/s (yay!!!)
[2014-03-26 22:20:21] accepted: 8/8 (100.00%), 32626 khash/s (yay!!!)
[2014-03-26 22:20:21] accepted: 9/9 (100.00%), 32626 khash/s (yay!!!)
[2014-03-26 22:20:21] accepted: 10/10 (100.00%), 36022 khash/s (yay!!!)
[2014-03-26 22:20:21] accepted: 11/11 (100.00%), 36464 khash/s (yay!!!)
[2014-03-26 22:20:22] accepted: 12/12 (100.00%), 39261 khash/s (yay!!!)
[2014-03-26 22:20:22] accepted: 13/13 (100.00%), 37168 khash/s (yay!!!)
[2014-03-26 22:20:22] accepted: 14/14 (100.00%), 32859 khash/s (yay!!!)
[2014-03-26 22:20:22] accepted: 15/15 (100.00%), 33666 khash/s (yay!!!)
[2014-03-26 22:20:22] accepted: 16/16 (100.00%), 33666 khash/s (yay!!!)
[2014-03-26 22:20:22] accepted: 17/17 (100.00%), 27524 khash/s (yay!!!)
[2014-03-26 22:20:22] accepted: 18/18 (100.00%), 27524 khash/s (yay!!!)
[2014-03-26 22:20:22] accepted: 19/19 (100.00%), 27524 khash/s (yay!!!)
[2014-03-26 22:20:22] accepted: 20/20 (100.00%), 21147 khash/s (yay!!!)
[2014-03-26 22:20:22] accepted: 21/21 (100.00%), 21147 khash/s (yay!!!)
[2014-03-26 22:20:23] accepted: 22/22 (100.00%), 28517 khash/s (yay!!!)
[2014-03-26 22:20:23] accepted: 23/23 (100.00%), 28517 khash/s (yay!!!)
[2014-03-26 22:20:23] accepted: 24/24 (100.00%), 28891 khash/s (yay!!!)
[2014-03-26 22:20:23] accepted: 25/25 (100.00%), 26418 khash/s (yay!!!)
[2014-03-26 22:20:23] accepted: 25/26 (96.15%), 26418 khash/s (booooo)
[2014-03-26 22:20:23] accepted: 25/27 (92.59%), 31594 khash/s (booooo)
[2014-03-26 22:20:23] accepted: 25/28 (89.29%), 28041 khash/s (booooo)
[2014-03-26 22:20:23] accepted: 25/29 (86.21%), 29115 khash/s (booooo)
[2014-03-26 22:20:23] accepted: 25/30 (83.33%), 36782 khash/s (booooo)
[2014-03-26 22:20:24] accepted: 25/31 (80.65%), 39223 khash/s (booooo)
[2014-03-26 22:20:24] accepted: 25/32 (78.13%), 41065 khash/s (booooo)
[2014-03-26 22:20:24] accepted: 25/33 (75.76%), 41419 khash/s (booooo)
[2014-03-26 22:20:24] accepted: 25/34 (73.53%), 41419 khash/s (booooo)
[2014-03-26 22:20:24] accepted: 25/35 (71.43%), 36947 khash/s (booooo)
[2014-03-26 22:20:24] accepted: 25/36 (69.44%), 40473 khash/s (booooo)
[2014-03-26 22:20:24] accepted: 25/37 (67.57%), 40473 khash/s (booooo)
[2014-03-26 22:20:24] accepted: 25/38 (65.79%), 40503 khash/s (booooo)
[2014-03-26 22:20:25] accepted: 25/39 (64.10%), 38911 khash/s (booooo)
[2014-03-26 22:20:25] accepted: 25/40 (62.50%), 38911 khash/s (booooo)


Anyone have any ideas?

Thanks

Hello. I am trying to compile the 2 28 2014 release fo CudaMiner, on xubuntu 12.10 but I am getting an error. I have been looking for hours at this point for a solution, but I have yet to find one.  Here is what is happening:

root@arren-mining:/home/arren/cuda-extract/cudaminer-2014-02-28/cudaminer-src-2014.02.28# ./autogen.sh && ./configure && make
./autogen.sh: line 1: $'autoconf\r': command not found
root@arren-mining:/home/arren/cuda-extract/cudaminer-2014-02-28/cudaminer-src-2014.02.28#

I have looked in the autogen.sh file and cannot find the command it is referring to.  Any help?

Hrmmmm, that did improve things. Weird because I tried 4 ccminer windows and it was about the same as one, but 2 improves it. Strangeness.

Thanks - hitting around 60Mh now!!

My rig 6x750Ti got 70Mh (OC'd = core 200 mem 500)

Haha, glad it worked. Was just experimenting since my 6 750Tis weren't doing so hot compared to my x3 and x4 rigs. Splitting them up solved it.  Also, when you have 2 or more cmd prompts open you should minimize them and you'll get even more(at least i did).

YOU SIR, ARE AWESOME!!!!!  From 35-38, to 23 per pair, = 46!!!  I'll go ahead and thank you now.  THANK YOU! dunno why i didnt think to try that...

and Christian, you are a god among men, great work!!

Thank you.

Getting 6Mh/s with each now.

Make 2 bat files, use -d 0,1 in one and -d 2,3 in the other. You can thank me later

GTX760, Compute 3.0 on HVC:  9.7 Mh/s, core 1300, ram 1700.

ccminer 0.5 is impressive!

hhmmm, do i need to switch from windows to linux? guessing  you using proprietary and not nouveau drivers *edit, im an idiot nouveau is redhat

I have 4x750ti with 35khash ... freaking awesome, but 10+ !!!

In the 0.5 release, the app uses different names to differentiate between the flavors of cuda. You must specify which one to use, ccminer20.exe, ccminer30.exe, and ccminer35.exe.

we have nealy the same setup, but I only have 4GB Ram and, as already stated ubuntu 13.10. I only run one instance and I use powered USB risers.