Getting all shares rejected
./cudaminer -a keccak -o stratum+tcp://maxpool.1gh.com:17333 -u mQNkv98K1XKLpgSXv1ykFKAgxwoMXGicFC -p x
Use the latest build posted an hour ago
Topic: [ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX] - page 884. (Read 3426922 times)
February 07, 2014, 09:47:29 AM
Getting all shares rejected
./cudaminer -a keccak -o stratum+tcp://maxpool.1gh.com:17333 -u mQNkv98K1XKLpgSXv1ykFKAgxwoMXGicFC -p x
Use the latest build posted an hour ago
February 07, 2014, 09:42:56 AM
Code:
[2014-02-07 14:39:42] accepted: 0/100 (0.00%), 2769 khash/s (booooo)
[2014-02-07 14:39:42] accepted: 0/101 (0.00%), 2769 khash/s (booooo)
[2014-02-07 14:39:42] accepted: 0/102 (0.00%), 2769 khash/s (booooo)
[2014-02-07 14:39:42] accepted: 0/103 (0.00%), 2769 khash/s (booooo)
[2014-02-07 14:39:42] accepted: 0/104 (0.00%), 2769 khash/s (booooo)
[2014-02-07 14:39:42] accepted: 0/105 (0.00%), 2769 khash/s (booooo)
[2014-02-07 14:39:42] accepted: 0/106 (0.00%), 2769 khash/s (booooo)
[2014-02-07 14:39:42] accepted: 0/107 (0.00%), 2769 khash/s (booooo)
[2014-02-07 14:39:43] accepted: 0/108 (0.00%), 2769 khash/s (booooo)
[2014-02-07 14:39:43] accepted: 0/109 (0.00%), 2769 khash/s (booooo)
[2014-02-07 14:39:43] accepted: 0/110 (0.00%), 2769 khash/s (booooo)
[2014-02-07 14:39:43] accepted: 0/111 (0.00%), 2769 khash/s (booooo)
[2014-02-07 14:39:43] accepted: 0/112 (0.00%), 2769 khash/s (booooo)
[2014-02-07 14:39:43] accepted: 0/113 (0.00%), 2769 khash/s (booooo)
[2014-02-07 14:39:43] accepted: 0/114 (0.00%), 2769 khash/s (booooo)
[2014-02-07 14:39:43] accepted: 0/115 (0.00%), 2769 khash/s (booooo)
[2014-02-07 14:39:43] accepted: 0/116 (0.00%), 2769 khash/s (booooo)
[2014-02-07 14:39:43] accepted: 0/117 (0.00%), 2769 khash/s (booooo)
[2014-02-07 14:39:43] accepted: 0/118 (0.00%), 2769 khash/s (booooo)
[2014-02-07 14:39:43] accepted: 0/119 (0.00%), 2769 khash/s (booooo)
[2014-02-07 14:39:43] accepted: 0/120 (0.00%), 2769 khash/s (booooo)
[2014-02-07 14:39:43] accepted: 0/121 (0.00%), 2769 khash/s (booooo)
[2014-02-07 14:39:43] accepted: 0/122 (0.00%), 2769 khash/s (booooo)
[2014-02-07 14:39:43] accepted: 0/123 (0.00%), 2769 khash/s (booooo)
[2014-02-07 14:39:43] accepted: 0/124 (0.00%), 2769 khash/s (booooo)
[2014-02-07 14:39:43] accepted: 0/125 (0.00%), 2769 khash/s (booooo)
[2014-02-07 14:39:43] accepted: 0/126 (0.00%), 2769 khash/s (booooo)
[2014-02-07 14:39:43] accepted: 0/127 (0.00%), 2769 khash/s (booooo)
[2014-02-07 14:39:43] accepted: 0/128 (0.00%), 2769 khash/s (booooo)
[2014-02-07 14:39:43] accepted: 0/129 (0.00%), 2769 khash/s (booooo)
[2014-02-07 14:39:43] accepted: 0/130 (0.00%), 2769 khash/s (booooo)
Getting all shares rejected
./cudaminer -a keccak -o stratum+tcp://maxpool.1gh.com:17333 -u mQNkv98K1XKLpgSXv1ykFKAgxwoMXGicFC -p x
February 07, 2014, 09:42:14 AM
Anyone fancy a challenge in suggesting launch config for a GTX285? LOL I may set fire to myself.
I did do a benchtest which gave me a F269x3 as a starting point but it's hashing at a pitiful level right now with no yays!
Any thoughts?
I did do a benchtest which gave me a F269x3 as a starting point but it's hashing at a pitiful level right now with no yays!
Any thoughts?
autotune is not supporting keccak at the moment
-l F1000x16 -L 256 for a start
reduce the 1000 to 500 if this refuses to run
Ah thanks for the suggestion, hashing at 37k but VERY VERY slowly, had to reduce to 500 as you mentioned. No yays as yet but its hashing once every 2-3 minutes....
February 07, 2014, 09:32:37 AM
c:\cudaminer -s 10 --algo=keccak -d gtx780 -L 128 -l K1024x32 -C 0 -i 1 -m 0 -o stratum+tcp://maxpool.1gh.com:17333 -u (wallet id) -p x
i'm getting 40mh/s with this according to 1gh.
my GPU started to smell before.. it had an extra command of -b 4096 in the string. Dont know if this was the cause. I was doing 80mh/s on 1gh when it was in there though.
Can you kill your gpu like this? im using a 780gtx windforce @ fullspeed and 70degrees...
my cards not that old.. wasnt cheap lol.
edit: oh wait... put my fans up to 90% and getting 64 degrees and now 95mh/s according to 1gh
yes it is paying out slowly.
you need to use the revised cudaminer posted a few pages back to get these speeds. very good. full of yays.
GPU load is 81%
tDP is at 66%
VDDC 1.16
temp: 63
fanspeed: 90%
i'm getting 40mh/s with this according to 1gh.
my GPU started to smell before.. it had an extra command of -b 4096 in the string. Dont know if this was the cause. I was doing 80mh/s on 1gh when it was in there though.
Can you kill your gpu like this? im using a 780gtx windforce @ fullspeed and 70degrees...
my cards not that old.. wasnt cheap lol.
edit: oh wait... put my fans up to 90% and getting 64 degrees and now 95mh/s according to 1gh
yes it is paying out slowly.
you need to use the revised cudaminer posted a few pages back to get these speeds. very good. full of yays.
GPU load is 81%
tDP is at 66%
VDDC 1.16
temp: 63
fanspeed: 90%
February 07, 2014, 09:26:51 AM
Anyone fancy a challenge in suggesting launch config for a GTX285? LOL I may set fire to myself.
I did do a benchtest which gave me a F269x3 as a starting point but it's hashing at a pitiful level right now with no yays!
Any thoughts?
I did do a benchtest which gave me a F269x3 as a starting point but it's hashing at a pitiful level right now with no yays!
Any thoughts?
autotune is not supporting keccak at the moment
-l F1000x16 -L 256 for a start
reduce the 1000 to 500 if this refuses to run
February 07, 2014, 09:26:00 AM
Has anyone used 1GH and received a payout? It's showing me a balance of 5 MAX but I haven't gotten the payout yet nor has it shown it as paid. It says it's supposed to be paid at 0.1 but it's not...
Its paying out, but the blocks has to mature first
February 07, 2014, 09:25:26 AM
Im only getting around 80% accepted, can get up to 10 boo's in a row, using a GTX 770, if anyone is using GTX770, please share your run.bat
EDIT: At 71% accepted now
EDIT: At 71% accepted now
February 07, 2014, 09:24:51 AM
Has anyone used 1GH and received a payout? It's showing me a balance of 5 MAX but I haven't gotten the payout yet nor has it shown it as paid. It says it's supposed to be paid at 0.1 but it's not...
February 07, 2014, 09:24:42 AM
If anyone has a Gtx770 and is mining at 1GH pool, please share configs for cudaminer
ok i did it. getting a lot of yay's!!!
this is my config (gtx680)
cudaminer.exe --algo=keccak -L 256 -l K1024x32 -i 0 -C 1 -m 1 -H 1 -s 10 -L 256 -o stratum+tcp://maxpool.1gh.com:17333
at 80-83.000 khash
That is a bit lower then what I am getting currently with my GTX660 ti, which is 103 khash. I am doing this as my string, cudaminer --algo=keccak -i 0 -H 2 -C 0 -m 1 -L 1024 -l K1024x32
tried your settings. but i still get 80-82 khash
February 07, 2014, 09:24:09 AM
I have a question about solo mining (MRC in my case).
I started mining in a pool (easymining.net) a few days ago and have found 2 blocks so far. I thought I'd give solo mining a try, but I'm not sure if I am actually solo mining at the moment. My main concern is that I don't have any notification about new blocks being detected.
My command line for cudaMiner is:
"C:\Program Files (x86)\Cudaminer\x64\cudaminer.exe" --algo=scrypt-jane:MRC -H 1 -C 1 -i 0 -l k8x32 -D -o http://127.0.0.1:44444 -O Username:Password
Username and Password are the ones specified in my microcoin.conf
I started mining in a pool (easymining.net) a few days ago and have found 2 blocks so far. I thought I'd give solo mining a try, but I'm not sure if I am actually solo mining at the moment. My main concern is that I don't have any notification about new blocks being detected.
My command line for cudaMiner is:
"C:\Program Files (x86)\Cudaminer\x64\cudaminer.exe" --algo=scrypt-jane:MRC -H 1 -C 1 -i 0 -l k8x32 -D -o http://127.0.0.1:44444 -O Username:Password
Username and Password are the ones specified in my microcoin.conf
server=1
rpcport=44444
rpcuser=Username
rpcpassword=Password
rpcallowip=127.0.0.1
rpcthreads=8
also run the wallet with the -server flag (at least on Windows this seems to be required)
February 07, 2014, 09:20:37 AM
I have a question about solo mining (MRC in my case).
I started mining in a pool (easymining.net) a few days ago and have found 2 blocks so far. I thought I'd give solo mining a try, but I'm not sure if I am actually solo mining at the moment. My main concern is that I don't have any notification about new blocks being detected.
My command line for cudaMiner is:
"C:\Program Files (x86)\Cudaminer\x64\cudaminer.exe" --algo=scrypt-jane:MRC -H 1 -C 1 -i 0 -l k8x32 -D -o http://127.0.0.1:44444 -O Username:Password
Username and Password are the ones specified in my microcoin.conf
I did try changing the password to one that was incorrect, and that gives me an error when I start cudaMiner, so I know the config file is being read. Also, if I close my wallet and leave cudaMiner running then I get a "json_rpc_call failed" error.
If I change the -o URL:port and -O Username:Password to the ones for the pool my worker is picked up as being active and I can mine coins.
Can anyone tell me if it sounds like my setup is correct, or if I've missed a step, or option somewhere?
Oh, and if anyone is interested in the launch config/settings. I'm doing 58-60kh/s on a Geforce GT 650M (Dell Inspiron 7720SE) using the settings above.
I started mining in a pool (easymining.net) a few days ago and have found 2 blocks so far. I thought I'd give solo mining a try, but I'm not sure if I am actually solo mining at the moment. My main concern is that I don't have any notification about new blocks being detected.
My command line for cudaMiner is:
"C:\Program Files (x86)\Cudaminer\x64\cudaminer.exe" --algo=scrypt-jane:MRC -H 1 -C 1 -i 0 -l k8x32 -D -o http://127.0.0.1:44444 -O Username:Password
Username and Password are the ones specified in my microcoin.conf
I did try changing the password to one that was incorrect, and that gives me an error when I start cudaMiner, so I know the config file is being read. Also, if I close my wallet and leave cudaMiner running then I get a "json_rpc_call failed" error.
If I change the -o URL:port and -O Username:Password to the ones for the pool my worker is picked up as being active and I can mine coins.
Can anyone tell me if it sounds like my setup is correct, or if I've missed a step, or option somewhere?
Oh, and if anyone is interested in the launch config/settings. I'm doing 58-60kh/s on a Geforce GT 650M (Dell Inspiron 7720SE) using the settings above.
February 07, 2014, 09:18:11 AM
Anyone fancy a challenge in suggesting launch config for a GTX285? LOL I may set fire to myself.
I did do a benchtest which gave me a F269x3 as a starting point but it's hashing at a pitiful level right now with no yays!
Any thoughts?
I did do a benchtest which gave me a F269x3 as a starting point but it's hashing at a pitiful level right now with no yays!
Any thoughts?
February 07, 2014, 09:18:07 AM
If anyone has a Gtx770 and is mining at 1GH pool, please share configs for cudaminer
ok i did it. getting a lot of yay's!!!
this is my config (gtx680)
cudaminer.exe --algo=keccak -L 256 -l K1024x32 -i 0 -C 1 -m 1 -H 1 -s 10 -L 256 -o stratum+tcp://maxpool.1gh.com:17333
at 80-83.000 khash
That is a bit lower then what I am getting currently with my GTX660 ti, which is 103 khash. I am doing this as my string, cudaminer --algo=keccak -i 0 -H 2 -C 0 -m 1 -L 1024 -l K1024x32
February 07, 2014, 09:16:46 AM
[2014-02-07 14:03:52] 1 miner threads started, using 'keccak' algorithm.
[2014-02-07 14:03:53] GPU #0: GeForce GTX 560 Ti with compute capability 2.1
[2014-02-07 14:03:53] GPU #0: interactive: 1, tex-cache: 0 , single-alloc: 0
[2014-02-07 14:03:53] GPU #0: 32 hashes / 0.0 MB per warp.
[2014-02-07 14:03:53] GPU #0: using launch configuration F1024x16
[2014-02-07 14:03:53] GPU #0: GeForce GTX 560 Ti, 61745 khash/s
[2014-02-07 14:03:56] GPU #0: GeForce GTX 560 Ti, 63920 khash/s
[2014-02-07 14:03:56] accepted: 1/1 (100.00%), 63920 khash/s (yay!!!)
[2014-02-07 14:04:01] GPU #0: GeForce GTX 560 Ti, 64165 khash/s
[2014-02-07 14:04:02] accepted: 2/2 (100.00%), 64165 khash/s (yay!!!)
[2014-02-07 14:04:03] GPU #0: GeForce GTX 560 Ti, 63994 khash/s
[2014-02-07 14:04:03] accepted: 3/3 (100.00%), 63994 khash/s (yay!!!)
[2014-02-07 14:04:03] GPU #0: GeForce GTX 560 Ti, 63998 khash/s
[2014-02-07 14:04:03] accepted: 4/4 (100.00%), 63998 khash/s (yay!!!)
[2014-02-07 14:04:06] GPU #0: GeForce GTX 560 Ti, 63502 khash/s
[2014-02-07 14:04:06] accepted: 5/5 (100.00%), 63502 khash/s (yay!!!)
I just managed to configure my wallet and as you can see I am getting around 64000khash/s with my 560ti.I am really happy in am using an Nvidia card, thought mine is now a bit outdated.
THANK YOU, THANK YOU, A THOUSAND TIMES THANK YOU CHRISTIAN FOR YOUR AMAZING WORK.
[2014-02-07 14:03:53] GPU #0: GeForce GTX 560 Ti with compute capability 2.1
[2014-02-07 14:03:53] GPU #0: interactive: 1, tex-cache: 0 , single-alloc: 0
[2014-02-07 14:03:53] GPU #0: 32 hashes / 0.0 MB per warp.
[2014-02-07 14:03:53] GPU #0: using launch configuration F1024x16
[2014-02-07 14:03:53] GPU #0: GeForce GTX 560 Ti, 61745 khash/s
[2014-02-07 14:03:56] GPU #0: GeForce GTX 560 Ti, 63920 khash/s
[2014-02-07 14:03:56] accepted: 1/1 (100.00%), 63920 khash/s (yay!!!)
[2014-02-07 14:04:01] GPU #0: GeForce GTX 560 Ti, 64165 khash/s
[2014-02-07 14:04:02] accepted: 2/2 (100.00%), 64165 khash/s (yay!!!)
[2014-02-07 14:04:03] GPU #0: GeForce GTX 560 Ti, 63994 khash/s
[2014-02-07 14:04:03] accepted: 3/3 (100.00%), 63994 khash/s (yay!!!)
[2014-02-07 14:04:03] GPU #0: GeForce GTX 560 Ti, 63998 khash/s
[2014-02-07 14:04:03] accepted: 4/4 (100.00%), 63998 khash/s (yay!!!)
[2014-02-07 14:04:06] GPU #0: GeForce GTX 560 Ti, 63502 khash/s
[2014-02-07 14:04:06] accepted: 5/5 (100.00%), 63502 khash/s (yay!!!)
I just managed to configure my wallet and as you can see I am getting around 64000khash/s with my 560ti.I am really happy in am using an Nvidia card, thought mine is now a bit outdated.
THANK YOU, THANK YOU, A THOUSAND TIMES THANK YOU CHRISTIAN FOR YOUR AMAZING WORK.
February 07, 2014, 09:15:01 AM
If anyone has a Gtx770 and is mining at 1GH pool, please share configs for cudaminer
ok i did it. getting a lot of yay's!!!
this is my config (gtx680)
cudaminer.exe --algo=keccak -L 256 -l K1024x32 -i 0 -C 1 -m 1 -H 1 -s 10 -L 256 -o stratum+tcp://maxpool.1gh.com:17333
http://puu.sh/6N8ME.png
February 07, 2014, 09:12:00 AM
If anyone has a Gtx770 and is mining at 1GH pool, please share configs for cudaminer
February 07, 2014, 09:11:51 AM
40% boost, nice!
Donations gratefully received
MAX: mR6iiBz4NRBMDjo2zpY9fJr5yUn4EL6pgd
XPM: AWFyioszN3vsyQsPbAtCybqu3j5v6FqQTE
BTC: 1LXgRb1F6KZmVQBzcKsfpAAL57Se9EKeT6
Donations gratefully received
MAX: mR6iiBz4NRBMDjo2zpY9fJr5yUn4EL6pgd
XPM: AWFyioszN3vsyQsPbAtCybqu3j5v6FqQTE
BTC: 1LXgRb1F6KZmVQBzcKsfpAAL57Se9EKeT6
Thanks man! I went from 87 to 122, great job.
February 07, 2014, 09:06:11 AM
I only get stratum detected new block.
using gtx 680
--algo=keccak -q -C 2 -d 0 -i 0 -m 1 -L 128 -l K800x16 --no-autotune
any tips?
using gtx 680
--algo=keccak -q -C 2 -d 0 -i 0 -m 1 -L 128 -l K800x16 --no-autotune
any tips?
February 07, 2014, 09:05:31 AM
I used Cuda 5.5 toolkit and build with Visual Studio 2012
I know using CUDA 5.0 vs CUDA 5.5 toolkit makes a speed difference. That, and maybe the fact that I am using Visual Studio 2010
and the dependencies I made available in the OP.
I probably made about the same fixes to the code as you did. My build was much faster than the one previously posted here (not by you, by someone else), but not quite as fast as yours is now (hadn't seen you'd just added that to the OP before I posted )
)I know using CUDA 5.0 vs CUDA 5.5 toolkit makes a speed difference. That, and maybe the fact that I am using Visual Studio 2010
and the dependencies I made available in the OP.
February 07, 2014, 09:04:09 AM
Which is more trustworthy
Congratulations on your maxcoin man, 1000+ how much BTC did you get from that?
Congratulations on your maxcoin man, 1000+ how much BTC did you get from that?
I've only sold off like 200 MAX so far. I am having trouble with an uncomfirmed 2.5 BTC withdrawal
from coins.e-com right now.
I heard mcxNOW has the coin for trading now. I shall try my luck there.
Nice, i also just signed up on mcxnow, seems like a fast and stable site! Good luck.
Jump to: