[ANN] CureCoin 2.0 is live - Mandatory Update is available now - DEC 2018 - page 197.

meelvanchris

sr. member

Activity: 336

Merit: 250

Quote from: Fastpow on May 14, 2014, 06:38:08 AM

Just got my first 5 curecoins! It's a bit weird tho since the stanford link is showing 230k points or something and the pool just 49k.
Anyway, happy with my coins

Congrats on your coins

stanford page is showing total number of ppd... pool shows daily ppd.
To check your stas /current points for the day /total points : http://folding.extremeoverclocking.com/user_list.php?s=&t=224497&p=2 (#182)

Fastpow

full member

Activity: 322

Merit: 102

Just got my first 5 curecoins! It's a bit weird tho since the stanford link is showing 230k points or something and the pool just 49k.

Anyway, happy with my coins

meelvanchris

sr. member

Activity: 336

Merit: 250

Quote from: kqpahv on May 14, 2014, 06:17:55 AM

Yeah, I saw that thread to but down clocking didnt seem to help either Embarrassed

Also my PPD is way lower now even if all the cards are running properly at the moment. when I started out I got about 415K PPD but now it wont go above 175K no matter what. I guess folding is not a straight forward as I thought Undecided

I will dedicate today for trying to find a solution and if I come up with something I'll share it here.

It can be tricky yes. I started with 230k ppd. Then upgraded to 14.4 cat. then my ppd went down to 130k. Turned out the 14.4 was in fact working ad given 20% better yields.... but since my cards were now doing 95k each instead of 75k...my dualcore cpu couldnt handle the load and was bottlenecking the system and so i would get less instead of more. Then i went back to 13.12cat. and i was only getting 5k ppd.... but that turned out to be matter of impatience... just had to wait a few hours again for system to settle and now been toasting a stable 230k again for about a week...(havent touched any settings since =)) if you really cant seem to figure it out, add ur question + system details + logs on foldingforum. As long as you thread with respect they are always more then happy to help out.

Quote from: Zackgeno96 on May 14, 2014, 06:21:39 AM

links to the folding pool and guide are broken =/

foldingpool : https://www.cryptobullionpools.com/
foldingguide1: https://www.cryptobullionpools.com/about
sameguidedifferntplace http://www.curecoin.us/index.php?topic=9.0

Zackgeno96

hero member

Activity: 1778

Merit: 520

links to the folding pool and guide are broken =/

kqpahv

full member

Activity: 229

Merit: 100

Quote from: meelvanchris on May 14, 2014, 04:16:22 AM

Quote from: kqpahv on May 14, 2014, 03:59:21 AM

Guys I need help please.

I am having a constant problem with with GPU's hitting 99.99% and they stop working. GPU utilization goes to 0% and the PPD falls very low.
This problem is present at every rig I have tried to fold with different brands of 280x's. Tried 13.12 drivers and 14.4 drivers - no difference. Even restarting the computer does not solve the problem. If I force finish the 99.99% projects new stuff comes up instantly in the range of anywhere from 20-70% but in a while they will get stuck at 99.99% again.

This has caused me stop folding for now as most of the time the rigs are not doing anything unless I constantly nurture them and finish projects manually. Tried googling but not much luck. Though people out there seem to have the same problem

Most of us here are miners.. so personally i wouldnt know the specifics to that. Also very much doubt that it is driver related. But i can imagine your at wits end and are trying everything......Maybe try your luck on https://foldingforum.org (when posting remember to thread with respect as they are a very different community then us, no team promotions etc) Quick search led me to this topic : https://foldingforum.org/viewtopic.php?f=74&t=25341 (explains why u get to 20-70 range after restart also)
But sure there is a lot more information to be found on the subject. Hope you find a solution

Yeah, I saw that thread to but down clocking didnt seem to help either Embarrassed

Also my PPD is way lower now even if all the cards are running properly at the moment. when I started out I got about 415K PPD but now it wont go above 175K no matter what. I guess folding is not a straight forward as I thought Undecided

I will dedicate today for trying to find a solution and if I come up with something I'll share it here.

sobad

member

Activity: 77

Merit: 10

Quote from: meelvanchris on May 14, 2014, 05:52:39 AM

Quote from: sobad on May 14, 2014, 05:39:00 AM

I'm always getting FahCore 0x15.
Everything done as https://www.cryptobullionpools.com/about said.
How can I change to 0x17 ??

Specific projects run on different cores. Cant just change it. Depending your type of hardware will determine what projects you will get assigned. Faster cards will get bigger projects. Could also be your drivers, newer drivers yield better ppd and thus get your cards could get different projects that do run on core 0.x17. Read more : https://foldingforum.org/viewtopic.php?f=19&t=24887

Thanks I'll check it out!

meelvanchris

sr. member

Activity: 336

Merit: 250

Quote from: sobad on May 14, 2014, 05:39:00 AM

I'm always getting FahCore 0x15.
Everything done as https://www.cryptobullionpools.com/about said.
How can I change to 0x17 ??

Specific projects run on different cores. Cant just change it. Depending your type of hardware will determine what projects you will get assigned. Faster cards will get bigger projects. Could also be your drivers, newer drivers yield better ppd and thus get your cards could get different projects that do run on core 0.x17. Read more : https://foldingforum.org/viewtopic.php?f=19&t=24887
(Also : doublecheck that you have client-type advanced in your settings -> configure -> expert)

sobad

member

Activity: 77

Merit: 10

I'm always getting FahCore 0x15.
Everything done as https://www.cryptobullionpools.com/about said.
How can I change to 0x17 ??

meelvanchris

sr. member

Activity: 336

Merit: 250

Quote from: kqpahv on May 14, 2014, 03:59:21 AM

Guys I need help please.

I am having a constant problem with with GPU's hitting 99.99% and they stop working. GPU utilization goes to 0% and the PPD falls very low.
This problem is present at every rig I have tried to fold with different brands of 280x's. Tried 13.12 drivers and 14.4 drivers - no difference. Even restarting the computer does not solve the problem. If I force finish the 99.99% projects new stuff comes up instantly in the range of anywhere from 20-70% but in a while they will get stuck at 99.99% again.

This has caused me stop folding for now as most of the time the rigs are not doing anything unless I constantly nurture them and finish projects manually. Tried googling but not much luck. Though people out there seem to have the same problem

Most of us here are miners.. so personally i wouldnt know the specifics to that. Also very much doubt that it is driver related. But i can imagine your at wits end and are trying everything......Maybe try your luck on https://foldingforum.org (when posting remember to thread with respect as they are a very different community then us, no team promotions etc) Quick search led me to this topic : https://foldingforum.org/viewtopic.php?f=74&t=25341 (explains why u get to 20-70 range after restart also)
But sure there is a lot more information to be found on the subject. Hope you find a solution

kqpahv

full member

Activity: 229

Merit: 100

Guys I need help please.

I am having a constant problem with with GPU's hitting 99.99% and they stop working. GPU utilization goes to 0% and the PPD falls very low.
This problem is present at every rig I have tried to fold with different brands of 280x's. Tried 13.12 drivers and 14.4 drivers - no difference. Even restarting the computer does not solve the problem. If I force finish the 99.99% projects new stuff comes up instantly in the range of anywhere from 20-70% but in a while they will get stuck at 99.99% again.

This has caused me stop folding for now as most of the time the rigs are not doing anything unless I constantly nurture them and finish projects manually. Tried googling but not much luck. Though people out there seem to have the same problem

YNWA2806

sr. member

Activity: 398

Merit: 250

Hey guys,
Am i the only one having troubles logging into the folding pool Huh

after entering my Username and password its just redirects me to the logging page as "Guest",
am i missing something??

zbhsb

newbie

Activity: 15

Merit: 0

This coin sounds really very good, hope a lot of computing power can be output to the public welfare projects.

meelvanchris

sr. member

Activity: 336

Merit: 250

Quote from: nonny12 on May 13, 2014, 11:38:43 PM

Quote from: cameronpalte on May 13, 2014, 11:32:41 PM

Are you sure that your rig(s) are set up correctly pointg at the folding pool. Otherwise if the pool shows 18 coins so far then it is probably catching up from the beginning. At are current PPD you should be getting ~20-25 coins per day. However, you still have made ~$30 so far. I would wait a little longer and I agree there needs to be more information about payouts we are working on getting it updated.

I'm pretty certain it's setup correctly. If the payouts are still behind in my case where I've been folding to the CureCoin team since a few hours after launch, then theres more than a 24 hour lag.

Ur stats : #155
http://folding.extremeoverclocking.com/user_list.php?s=&t=224497&p=2
Also take into acount that the first payout you got is the first day you started folding. (Without any bonus points)
And by day #4, 'folding difficuty' (to put it in miners terms) has also gone up. But looking at your stats, you have turned in 13 wu's. So uve only started accumulating bonus points since recently. (and the 'delay' is not 24 hours, its 48+ hours)

r3animation

hero member

Activity: 756

Merit: 500

Quote from: nonny12 on May 14, 2014, 12:30:33 AM

Quote from: ChristianVirtual on May 13, 2014, 11:54:22 PM

Please restart your CPU slot, set it to finish so it not get a new WU if you don't want. But please doing harm the science in not finishing WU. It will also harm you passkey, keep in mind the required 80% success rate.

To make it more secure you can configure the CPU slot with an advanced option "pause-on-start" set true. Will not start the slot after reboot.

But please: finish work started.

It starts automatically when the program first starts yet we are told to pause the CPU slot because of bottleneck risks...

Well it really depends on your system isn't it? I have 2 gpus in a decently fast quadcore system so I don't need to disable anything.

So what you should do if you are indeed have bottlenecking issues, set it to finish first. Then when the WU is finished, go to the configure menu -> slots -> remove cpu.

nonny12

sr. member

Activity: 362

Merit: 250

Quote from: ChristianVirtual on May 13, 2014, 11:54:22 PM

Please restart your CPU slot, set it to finish so it not get a new WU if you don't want. But please doing harm the science in not finishing WU. It will also harm you passkey, keep in mind the required 80% success rate.

To make it more secure you can configure the CPU slot with an advanced option "pause-on-start" set true. Will not start the slot after reboot.

But please: finish work started.

It starts automatically when the program first starts yet we are told to pause the CPU slot because of bottleneck risks...

r3animation

hero member

Activity: 756

Merit: 500

Quote from: georgeu2000 on May 13, 2014, 11:58:20 PM

How many coins have been created so far?

I calculated 740 blocks * 65/block = 48,100. Is that correct?

on the mining pools? if it's at 740 blocks, it would be 740 x 13 = 9620

georgeu2000

newbie

Activity: 35

Merit: 0

How many coins have been created so far?

I calculated 740 blocks * 65/block = 48,100. Is that correct?

ChristianVirtual

member

Activity: 71

Merit: 10

Quote from: nonny12 on May 13, 2014, 11:38:43 PM

Quote from: cameronpalte on May 13, 2014, 11:32:41 PM

Are you sure that your rig(s) are set up correctly pointg at the folding pool. Otherwise if the pool shows 18 coins so far then it is probably catching up from the beginning. At are current PPD you should be getting ~20-25 coins per day. However, you still have made ~$30 so far. I would wait a little longer and I agree there needs to be more information about payouts we are working on getting it updated.

I'm pretty certain it's setup correctly. If the payouts are still behind in my case where I've been folding to the CureCoin team since a few hours after launch, then theres more than a 24 hour lag.

Please restart your CPU slot, set it to finish so it not get a new WU if you don't want. But please doing harm the science in not finishing WU. It will also harm you passkey, keep in mind the required 80% success rate.

To make it more secure you can configure the CPU slot with an advanced option "pause-on-start" set true. Will not start the slot after reboot.

But please: finish work started.

nonny12

sr. member

Activity: 362

Merit: 250

Quote from: cameronpalte on May 13, 2014, 11:32:41 PM

Are you sure that your rig(s) are set up correctly pointg at the folding pool. Otherwise if the pool shows 18 coins so far then it is probably catching up from the beginning. At are current PPD you should be getting ~20-25 coins per day. However, you still have made ~$30 so far. I would wait a little longer and I agree there needs to be more information about payouts we are working on getting it updated.

I'm pretty certain it's setup correctly. If the payouts are still behind in my case where I've been folding to the CureCoin team since a few hours after launch, then theres more than a 24 hour lag.

summs

newbie

Activity: 28

Merit: 0

At the same time I also want something, but I can not participate Cry

Topic: [ANN] CureCoin 2.0 is live - Mandatory Update is available now - DEC 2018 - page 197. (Read 696254 times)