Topic: ✅|ANN| 🌍DESIRE |NeoScrypt| |🔨MasterNodes🔨| - COIN OF YOUR DREAMS! - page 145. (Read 167492 times)
October 24, 2017, 05:39:32 PM
rx470 how much does it give out per day?
October 24, 2017, 05:25:22 PM
any news about airdrop on Desire?
Just mine until it's too late! October 24, 2017, 05:22:57 PM
I can sell 1000 DSR for 0.05 BTC.
Лyчшe зa биpжy зaплaти взнoc и тaм пpoдaшь.
Eщe caм yдивилcя чтo быcтpo идeт, тyт пиcaли зa нecкoлькo чacoв 3 блoкa cлoвили. Ho ocтaвив кoмпьютep нa нoчь ничeгo бoльшe нe пoлyчил. Пoтoм eщe нecкoлькo днeй пpoдepжaл и выключил. И чacтo тaкoe бывaeт, кoгдa ycтaнaвливaeшь мacтepнoдy, мaйнишь, мaйнишь, a пoтoм .. бaц. втopaя cмeнa? Пepeвoжy для тex, ктo pyccкoгo нe пoнимaeт.
I translate for those who does not understand Russian.
And often this happens when you install masternode, Mainichi, Mainichi, and then ... BAM. the second shift?
Tвoй гyглoпepeвoдчик пьян и пытaeтcя втepeть кaкyю-тo дичь, пpoвepяй xoть чтo oн пpeдлaгaeт
October 24, 2017, 03:33:00 PM
any news about airdrop on Desire?
October 24, 2017, 02:45:34 PM
How long do coins that are staked in a masternode stay there? Are they removable at any time? Or is there some sort of collateral that is lost by taking down an MN?
Also, what happens if a masternode loses internet connection for a while?
Appreciate any responses, thanks.
Also, what happens if a masternode loses internet connection for a while?
Appreciate any responses, thanks.
The funds that are stored on the MN are at the disposal of the owner, at any time you can transfer the entire amount or not all. But if there is less than 1000 DSR on the balance of the MN, MN will not work.
If the MN loses the internet connection, then the wallet will hang on the last available block. When the Internet connection is restored, MN will continue its work.
So basically I can take the entire 1000 coins out from the masternode at any time and i don't lose anything correct?
Is it possible to just use a home internet connection rather than VPS for the masternode?
October 24, 2017, 02:26:56 PM
lpool.name not working ?
Working, last block on desire 6 min agoKk,who can tell me,why i have 5000 kh for 30 min and still have nothing?
https://pp.userapi.com/c840333/v840333802/1c645/gwVZ03KJODw.jpg
October 24, 2017, 01:24:42 PM
lpool.name not working ?
Working, last block on desire 6 min agoNot good.. Connection gets disconnected after few shares.
Quote
[2017-10-24 20:35:24] Starting on stratum+tcp://neoscrypt.lpool.name:4233
[2017-10-24 20:35:24] NVML GPU monitoring enabled.
[2017-10-24 20:35:24] NVAPI GPU monitoring enabled.
[2017-10-24 20:35:24] 1 miner thread started, using 'neoscrypt' algorithm.
[2017-10-24 20:35:26] ...retry after 30 seconds
[2017-10-24 20:36:05] Stratum difficulty set to 32 (0.00049)
[2017-10-24 20:36:05] neoscrypt block 5085, diff 9.566
[2017-10-24 20:36:06] GPU #0: Intensity set to 13 (+5), 8192 cuda threads
[2017-10-24 20:36:07] GPU #0: MSI GTX 970, 367.02 kH/s
[2017-10-24 20:36:08] accepted: 1/1 (diff 0.001), 434.95 kH/s yes!
[2017-10-24 20:36:12] GPU #0: MSI GTX 970, 503.90 kH/s
[2017-10-24 20:36:12] accepted: 2/2 (diff 0.001), 457.93 kH/s yes!
[2017-10-24 20:36:16] GPU #0: MSI GTX 970, 503.36 kH/s
[2017-10-24 20:36:16] GPU #0: 1304 MHz 2672.67 H/W 175W 69C FAN 47%
[2017-10-24 20:36:16] accepted: 3/3 (diff 0.001), 469.29 kH/s yes!
[2017-10-24 20:36:21] GPU #0: MSI GTX 970, 501.29 kH/s
[2017-10-24 20:36:29] GPU #0: MSI GTX 970, 503.43 kH/s
[2017-10-24 20:36:43] Stratum connection interrupted
[2017-10-24 20:37:04] Stratum connection failed: Failed to connect to neoscrypt.lpool.name port 4233: Timed out
[2017-10-24 20:37:04] ...retry after 30 seconds
[2017-10-24 20:37:22] GPU #0: 1094 MHz 7125.14 H/W 67W 57C FAN 38%
[2017-10-24 20:37:34] ...retry after 30 seconds
[2017-10-24 20:35:24] NVML GPU monitoring enabled.
[2017-10-24 20:35:24] NVAPI GPU monitoring enabled.
[2017-10-24 20:35:24] 1 miner thread started, using 'neoscrypt' algorithm.
[2017-10-24 20:35:26] ...retry after 30 seconds
[2017-10-24 20:36:05] Stratum difficulty set to 32 (0.00049)
[2017-10-24 20:36:05] neoscrypt block 5085, diff 9.566
[2017-10-24 20:36:06] GPU #0: Intensity set to 13 (+5), 8192 cuda threads
[2017-10-24 20:36:07] GPU #0: MSI GTX 970, 367.02 kH/s
[2017-10-24 20:36:08] accepted: 1/1 (diff 0.001), 434.95 kH/s yes!
[2017-10-24 20:36:12] GPU #0: MSI GTX 970, 503.90 kH/s
[2017-10-24 20:36:12] accepted: 2/2 (diff 0.001), 457.93 kH/s yes!
[2017-10-24 20:36:16] GPU #0: MSI GTX 970, 503.36 kH/s
[2017-10-24 20:36:16] GPU #0: 1304 MHz 2672.67 H/W 175W 69C FAN 47%
[2017-10-24 20:36:16] accepted: 3/3 (diff 0.001), 469.29 kH/s yes!
[2017-10-24 20:36:21] GPU #0: MSI GTX 970, 501.29 kH/s
[2017-10-24 20:36:29] GPU #0: MSI GTX 970, 503.43 kH/s
[2017-10-24 20:36:43] Stratum connection interrupted
[2017-10-24 20:37:04] Stratum connection failed: Failed to connect to neoscrypt.lpool.name port 4233: Timed out
[2017-10-24 20:37:04] ...retry after 30 seconds
[2017-10-24 20:37:22] GPU #0: 1094 MHz 7125.14 H/W 67W 57C FAN 38%
[2017-10-24 20:37:34] ...retry after 30 seconds
Edit: Also cant go to lpool.name to check how much I have because of this:
Quote
This site can’t be reached
lpool.name took too long to respond.
Try:
Checking the connection
Checking the proxy and the firewall
Running Windows Network Diagnostics
ERR_CONNECTION_TIMED_OUT
lpool.name took too long to respond.
Try:
Checking the connection
Checking the proxy and the firewall
Running Windows Network Diagnostics
ERR_CONNECTION_TIMED_OUT
Look for trouble on your side. http://i.piccy.info/i9/4cb9b3a5fb1bb7ed8cb942fe8a0f6242/1508868313/164048/1189648/desire.jpg
Yes its working now, but before it isnt, also lpool website says: This wallet address is not valid. You will not receive payments using this address. So I cant track how much im getting.
October 24, 2017, 01:07:14 PM
I can sell 1000 DSR for 0.05 BTC.
Лyчшe зa биpжy зaплaти взнoc и тaм пpoдaшь. Eщe caм yдивилcя чтo быcтpo идeт, тyт пиcaли зa нecкoлькo чacoв 3 блoкa cлoвили. Ho ocтaвив кoмпьютep нa нoчь ничeгo бoльшe нe пoлyчил. Пoтoм eщe нecкoлькo днeй пpoдepжaл и выключил. И чacтo тaкoe бывaeт, кoгдa ycтaнaвливaeшь мacтepнoдy, мaйнишь, мaйнишь, a пoтoм .. бaц. втopaя cмeнa? Пepeвoжy для тex, ктo pyccкoгo нe пoнимaeт.
I translate for those who does not understand Russian.
And often this happens when you install masternode, Mainichi, Mainichi, and then ... BAM. the second shift?
October 24, 2017, 01:06:12 PM
lpool.name not working ?
Working, last block on desire 6 min agoNot good.. Connection gets disconnected after few shares.
Quote
[2017-10-24 20:35:24] Starting on stratum+tcp://neoscrypt.lpool.name:4233
[2017-10-24 20:35:24] NVML GPU monitoring enabled.
[2017-10-24 20:35:24] NVAPI GPU monitoring enabled.
[2017-10-24 20:35:24] 1 miner thread started, using 'neoscrypt' algorithm.
[2017-10-24 20:35:26] ...retry after 30 seconds
[2017-10-24 20:36:05] Stratum difficulty set to 32 (0.00049)
[2017-10-24 20:36:05] neoscrypt block 5085, diff 9.566
[2017-10-24 20:36:06] GPU #0: Intensity set to 13 (+5), 8192 cuda threads
[2017-10-24 20:36:07] GPU #0: MSI GTX 970, 367.02 kH/s
[2017-10-24 20:36:08] accepted: 1/1 (diff 0.001), 434.95 kH/s yes!
[2017-10-24 20:36:12] GPU #0: MSI GTX 970, 503.90 kH/s
[2017-10-24 20:36:12] accepted: 2/2 (diff 0.001), 457.93 kH/s yes!
[2017-10-24 20:36:16] GPU #0: MSI GTX 970, 503.36 kH/s
[2017-10-24 20:36:16] GPU #0: 1304 MHz 2672.67 H/W 175W 69C FAN 47%
[2017-10-24 20:36:16] accepted: 3/3 (diff 0.001), 469.29 kH/s yes!
[2017-10-24 20:36:21] GPU #0: MSI GTX 970, 501.29 kH/s
[2017-10-24 20:36:29] GPU #0: MSI GTX 970, 503.43 kH/s
[2017-10-24 20:36:43] Stratum connection interrupted
[2017-10-24 20:37:04] Stratum connection failed: Failed to connect to neoscrypt.lpool.name port 4233: Timed out
[2017-10-24 20:37:04] ...retry after 30 seconds
[2017-10-24 20:37:22] GPU #0: 1094 MHz 7125.14 H/W 67W 57C FAN 38%
[2017-10-24 20:37:34] ...retry after 30 seconds
[2017-10-24 20:35:24] NVML GPU monitoring enabled.
[2017-10-24 20:35:24] NVAPI GPU monitoring enabled.
[2017-10-24 20:35:24] 1 miner thread started, using 'neoscrypt' algorithm.
[2017-10-24 20:35:26] ...retry after 30 seconds
[2017-10-24 20:36:05] Stratum difficulty set to 32 (0.00049)
[2017-10-24 20:36:05] neoscrypt block 5085, diff 9.566
[2017-10-24 20:36:06] GPU #0: Intensity set to 13 (+5), 8192 cuda threads
[2017-10-24 20:36:07] GPU #0: MSI GTX 970, 367.02 kH/s
[2017-10-24 20:36:08] accepted: 1/1 (diff 0.001), 434.95 kH/s yes!
[2017-10-24 20:36:12] GPU #0: MSI GTX 970, 503.90 kH/s
[2017-10-24 20:36:12] accepted: 2/2 (diff 0.001), 457.93 kH/s yes!
[2017-10-24 20:36:16] GPU #0: MSI GTX 970, 503.36 kH/s
[2017-10-24 20:36:16] GPU #0: 1304 MHz 2672.67 H/W 175W 69C FAN 47%
[2017-10-24 20:36:16] accepted: 3/3 (diff 0.001), 469.29 kH/s yes!
[2017-10-24 20:36:21] GPU #0: MSI GTX 970, 501.29 kH/s
[2017-10-24 20:36:29] GPU #0: MSI GTX 970, 503.43 kH/s
[2017-10-24 20:36:43] Stratum connection interrupted
[2017-10-24 20:37:04] Stratum connection failed: Failed to connect to neoscrypt.lpool.name port 4233: Timed out
[2017-10-24 20:37:04] ...retry after 30 seconds
[2017-10-24 20:37:22] GPU #0: 1094 MHz 7125.14 H/W 67W 57C FAN 38%
[2017-10-24 20:37:34] ...retry after 30 seconds
Edit: Also cant go to lpool.name to check how much I have because of this:
Quote
This site can’t be reached
lpool.name took too long to respond.
Try:
Checking the connection
Checking the proxy and the firewall
Running Windows Network Diagnostics
ERR_CONNECTION_TIMED_OUT
lpool.name took too long to respond.
Try:
Checking the connection
Checking the proxy and the firewall
Running Windows Network Diagnostics
ERR_CONNECTION_TIMED_OUT
October 24, 2017, 12:56:32 PM
I'm just created the remote masternode (with cold wallet as a masternode control wallet). And I can see payments to my msternode address in block explorer. But then I execute 'desire-cli getinfo' I can see only 1000 DSR on my wallet balance? Why I can't see (and transfer) payments recieved by my masternode?
October 24, 2017, 12:39:05 PM
lpool.name not working ?
Working, last block on desire 6 min agoNot good.. Connection gets disconnected after few shares.
Quote
[2017-10-24 20:35:24] Starting on stratum+tcp://neoscrypt.lpool.name:4233
[2017-10-24 20:35:24] NVML GPU monitoring enabled.
[2017-10-24 20:35:24] NVAPI GPU monitoring enabled.
[2017-10-24 20:35:24] 1 miner thread started, using 'neoscrypt' algorithm.
[2017-10-24 20:35:26] ...retry after 30 seconds
[2017-10-24 20:36:05] Stratum difficulty set to 32 (0.00049)
[2017-10-24 20:36:05] neoscrypt block 5085, diff 9.566
[2017-10-24 20:36:06] GPU #0: Intensity set to 13 (+5), 8192 cuda threads
[2017-10-24 20:36:07] GPU #0: MSI GTX 970, 367.02 kH/s
[2017-10-24 20:36:08] accepted: 1/1 (diff 0.001), 434.95 kH/s yes!
[2017-10-24 20:36:12] GPU #0: MSI GTX 970, 503.90 kH/s
[2017-10-24 20:36:12] accepted: 2/2 (diff 0.001), 457.93 kH/s yes!
[2017-10-24 20:36:16] GPU #0: MSI GTX 970, 503.36 kH/s
[2017-10-24 20:36:16] GPU #0: 1304 MHz 2672.67 H/W 175W 69C FAN 47%
[2017-10-24 20:36:16] accepted: 3/3 (diff 0.001), 469.29 kH/s yes!
[2017-10-24 20:36:21] GPU #0: MSI GTX 970, 501.29 kH/s
[2017-10-24 20:36:29] GPU #0: MSI GTX 970, 503.43 kH/s
[2017-10-24 20:36:43] Stratum connection interrupted
[2017-10-24 20:37:04] Stratum connection failed: Failed to connect to neoscrypt.lpool.name port 4233: Timed out
[2017-10-24 20:37:04] ...retry after 30 seconds
[2017-10-24 20:37:22] GPU #0: 1094 MHz 7125.14 H/W 67W 57C FAN 38%
[2017-10-24 20:37:34] ...retry after 30 seconds
[2017-10-24 20:35:24] NVML GPU monitoring enabled.
[2017-10-24 20:35:24] NVAPI GPU monitoring enabled.
[2017-10-24 20:35:24] 1 miner thread started, using 'neoscrypt' algorithm.
[2017-10-24 20:35:26] ...retry after 30 seconds
[2017-10-24 20:36:05] Stratum difficulty set to 32 (0.00049)
[2017-10-24 20:36:05] neoscrypt block 5085, diff 9.566
[2017-10-24 20:36:06] GPU #0: Intensity set to 13 (+5), 8192 cuda threads
[2017-10-24 20:36:07] GPU #0: MSI GTX 970, 367.02 kH/s
[2017-10-24 20:36:08] accepted: 1/1 (diff 0.001), 434.95 kH/s yes!
[2017-10-24 20:36:12] GPU #0: MSI GTX 970, 503.90 kH/s
[2017-10-24 20:36:12] accepted: 2/2 (diff 0.001), 457.93 kH/s yes!
[2017-10-24 20:36:16] GPU #0: MSI GTX 970, 503.36 kH/s
[2017-10-24 20:36:16] GPU #0: 1304 MHz 2672.67 H/W 175W 69C FAN 47%
[2017-10-24 20:36:16] accepted: 3/3 (diff 0.001), 469.29 kH/s yes!
[2017-10-24 20:36:21] GPU #0: MSI GTX 970, 501.29 kH/s
[2017-10-24 20:36:29] GPU #0: MSI GTX 970, 503.43 kH/s
[2017-10-24 20:36:43] Stratum connection interrupted
[2017-10-24 20:37:04] Stratum connection failed: Failed to connect to neoscrypt.lpool.name port 4233: Timed out
[2017-10-24 20:37:04] ...retry after 30 seconds
[2017-10-24 20:37:22] GPU #0: 1094 MHz 7125.14 H/W 67W 57C FAN 38%
[2017-10-24 20:37:34] ...retry after 30 seconds
Edit: Also cant go to lpool.name to check how much I have because of this:
Quote
This site can’t be reached
lpool.name took too long to respond.
Try:
Checking the connection
Checking the proxy and the firewall
Running Windows Network Diagnostics
ERR_CONNECTION_TIMED_OUT
lpool.name took too long to respond.
Try:
Checking the connection
Checking the proxy and the firewall
Running Windows Network Diagnostics
ERR_CONNECTION_TIMED_OUT
Edit 2: lpool website says: This wallet address is not valid. You will not receive payments using this address. So I cant track how much im getting.
October 24, 2017, 12:19:52 PM
lpool.name not working ?
Working, last block on desire 6 min ago 
October 24, 2017, 11:52:53 AM
lpool.name not working ?
October 24, 2017, 11:07:02 AM
I can sell 1000 DSR for 0.05 BTC.
Лyчшe зa биpжy зaплaти взнoc и тaм пpoдaшь. Eщe caм yдивилcя чтo быcтpo идeт, тyт пиcaли зa нecкoлькo чacoв 3 блoкa cлoвили. Ho ocтaвив кoмпьютep нa нoчь ничeгo бoльшe нe пoлyчил. Пoтoм eщe нecкoлькo днeй пpoдepжaл и выключил. October 24, 2017, 10:36:26 AM
how to run 2 nodes on 1 wallet?
October 24, 2017, 08:57:05 AM
I need only static IP for launch the Masternode?
yes.
October 24, 2017, 08:49:52 AM
I need only static IP for launch the Masternode?
October 24, 2017, 08:42:00 AM
I can sell 1000 DSR for 0.05 BTC.
Лyчшe зa биpжy зaплaти взнoc и тaм пpoдaшь. October 24, 2017, 08:37:08 AM
How long do coins that are staked in a masternode stay there? Are they removable at any time? Or is there some sort of collateral that is lost by taking down an MN?
Also, what happens if a masternode loses internet connection for a while?
Appreciate any responses, thanks.
Also, what happens if a masternode loses internet connection for a while?
Appreciate any responses, thanks.
The funds that are stored on the MN are at the disposal of the owner, at any time you can transfer the entire amount or not all. But if there is less than 1000 DSR on the balance of the MN, MN will not work.
If the MN loses the internet connection, then the wallet will hang on the last available block. When the Internet connection is restored, MN will continue its work.
October 24, 2017, 05:05:27 AM
I can sell 1000 DSR for 0.05 BTC.
Лyчшe зa биpжy зaплaти взнoc и тaм пpoдaшь.Jump to: