Topic: ✅|ANN| 🌍DESIRE |NeoScrypt| |🔨MasterNodes🔨| - COIN OF YOUR DREAMS! - page 95. (Read 167492 times)

Hey. I do not have a wallet in the MAC OS. Any solution ... Running a wallet leads to an error

Which miner is good for VEGA 56?

is there any news with the listing?

I may have located the problem but i have   no idea what is going on why its like this what to do





but i must notice that the problem appearead after update Except if it was some crazy coincedence


heres 2 links

link 1 what are supposed to be opened just for browsing

https://snag.gy/Krwkt4.jpg

And link 2   that the port is open -again with restart with save everythiing  +firewall in windows is enabled to everything

https://snag.gy/RwEpgD.jpg




I have no idea where to start  BUt if for some reason I could "skip" the port shit - VPS? or some other way in order to start my masternode  please suggest me

Thank you! I've done all you say and now node is ENABLED. When MN will receive coins I'll send some of them to you.


I changed only one thing - when executing from a console you need to write arguments without '=':
sentinel-win64.exe --config C:\path\to\desire.conf

Update: No luck getting it working, tried everything recently suggested by mninfo.  Was working fine before the update. Keep having issues with the ip address


21:08:00

masternode start

21:08:05

Not capable masternode: Could not connect..


Sentinel says: invalid masternode status, can't continue

I've been following along for the last couple hours and have the same problem.  You've saved me a lot of writing.    I'm going to keep trying for a bit more.

Thanks mninfo for all your work on this, I'll send you a tip when I get it working.  

Question:  If I'm using the mn hosting service, does he have to install sentinel and make changes on his end or is it all about my main wallet on my win 64 at home?    

Question2:  I don't have access to the config on our router as I'm using someone else's wifi, therefore I can't run the masternode from my home computer with desire?  It works fine with bitradio...

Ok As expected


masternode cannot connect to my Ip for some reason

I will play with the router as a last stroke then I will sleep


If i solve this one (which 2 days ago was working fine)  I will be able to do it

Ok here we go I will do this right now report back in 2-5 minutes

Basically that's all, do as you said! And yes, server=1, leave it like that.

If you get some error on the masternode startup, you might try remove "externalip=IPv4" and instead write "bind=IPv4:9919", but try as you have first

I meant A guide with picture so even an 8 y old could understand with pics and how to set up a hot wallet and even a multiple wallet on the Same machine using windows *no VPS



What do you mean by that "port"?        I dont know if you runed  a standart hot wallet


Where you send 1k coins,  Then  in Debug  masternode genkey    -> Copy it in the wall conf  (desire.conf)   file  

the File should look like this

masternode=1
masternodeprivkey=7qt9zSJWu******G943kK825pnuGPwEDZRjN7ohUdmJUynSK5Qc
externalip=your Ipv4


Save-> Restart wallet

in debug mode   "masternode start"


Then in Debug   it says Masternode successfull

  VIOLA masternode Runs smooth * Windows, *Wallet in the Same machine *NO VPS or linux  stuff

Aside that you could run Second MN  buy creating a short cut of the desire qt  adding the little command in the properties-creating an mn1  folder

do the procces all over again

OK thats the Basic guide


Problem that appear are offten     command: masternode start-> not capable masternode:  cannot connect to IP:  Your Ipv4 "

Sollution is to open Ports in router which is 9919

I did this back when we have the not so graphical wallet days

Did the thing it Worked like a charm


After all mini updates and block stucks the same procces +Rebuild the index worked like a charm


after the last update  when chaos arouse,   I did the procces again and it worked  I was even in the masternode winners list   but I disappeared  from the list like 10-20 minutes after i saw my adress i did not do anything

and since then if I run command it said  ""not capable masternode:  cannot connect to IP:  Your Ipv4 "


Some how today   (after repeating the process trying different stuff)  My masternode worked it started succefull but itself about 2 hours after i "gave up" (i realized it 2 hours later it sync by it self)     but with the Watchdog expired

Ok i said  we are on a good path since guys reported that it is only a status but the node  is working

Ive tried to Set up the second node   Like boozer guided,  Shortcut- properties-dirmn1 command

Start wallet repeat the proccess   after the repeat   "command: masternode start-> not capable masternode:  cannot connect to IP:  Your Ipv4 "

I said F** how can it be   same machine  One wallet runs and the other does not?  

then viola Both wallets could not connect to your IP and more or less here we are




Now I send all coins to another wallet another machine

Deleted everything    restarted  router runned the wallet fresh it did sync everything is new

Im on the 6 confirms  I need 15


I may go to sleep though its 5am here ive have not slept yet


So My question is this how should i proceed


*based on what you have said

I should send 1k coins

after 15 confirms  I should do the basic stuff like gen key etc

and the desire.conf should look like this

masternode=1
masternodeprivkey=7qt9zSJWu******G943kK825pnuGPwEDZRjN7ohUdmJUynSK5Qc
externalip=Ipv4
rpcuser=superdesireuser
rpcpassword=superdesirepassword
server=1     (what about this one? let it be?)
rpcport=9918
rpcconnect=127.0.0.1

Save  Restart wallet  w8 for it to sync everything


Option A

and then to the sentinal  (folder-> Sentinel.ex  with the sentinel.conf  *the Conf contains the Path to desire.conf for windows would be something like that

desire_conf=C:\Users\neu\AppData\Roaming\DesireCore

then

Start Exe 

  pray to jesus


I have like now 25 COnfirms I;ll w8 5 minutes for a respond and then Try it and then go to sleep

if I missed anything correct me pls

Running every minute is what it should do, so that fine.

On the WATCHDOG_EXPIRED, try the "when everything fails part". Backup "wallet.dat", close the wallet, remove everything but "wallet.dat" and "desire.conf" under "desirecore" and then restart the wallet.

EDIT: Just seen your update/edit! Glad to read that!

So i've followed everything to a T. sentinel is running happily (i think) every minute or so. It just says running sentinel and nothing else.

Unfortunately the masternode status still reports watchdog_expired. And yes,I am running the latest wallet and completely reindexed.

Any thoughts?

**UPDATE** After about 15min it changed to ENABLED. Not sure if it will stay in this status or not, but I'll keep updated.

CPU mining is somewhat better for nature for sure

Friends!

Our team is ready to state that the update to version 0.12.2.1 was successful! Yes, there were some difficulties, but thanks to you, we did it.

Thank you to all members of our community, for your trust! Separately, we want to express our gratitude to people:

1. mninfo - for fixing  source code and compiling Windows and Linux versions of Sentinel.
2. CHAOSiTEC - for fixing source code.

Guys, I truly appreaciate you wanting to give me some coins. I'd like to be fair here, the dev already sent me some, so I encorage you to save them
I'd like to contribute back to desire with those coins, by setting more MNs, but until I get some more ips/vps's I can't do so (and money, I need money for the those things haha)

I'll be transparent, so let me share the same address I did with the dev (kudos to him! he cares about the coin being stable and running and encourages people to do so by giving "bounties"!)
Last time l say it, I think you should all save those coins for yourself!

DRqUDMYfQ5PWvuajuCN7ZkQBagKWtqFu2U



Already did https://bitcointalksearch.org/topic/m.24600193



lazy_boozer might have not posted but has been actively following all these posts, he has updated the main page with my guide (with proper links and credits ) and even updated desire/sentinel github, so don't worry about that!

What do you mean by that "port"? One thing is the masternode port which uses to send messages to the network (9919) and another one the rpcport, which is used internally to communicate the wallet with the sentinel (even the Debug console uses it). That one can be anything as long as it is greater than 1024, I've been using 9918 in the guide.

Guys i understand what Mn info did


I im really happy for the guys that solved their problem and kinda off about the "real" Dev team



I believe  Boozer Should Revivase the  "basic"  Windows Masternode guide Wich runs from the same machine that includes this sentinel thing


And to adress the "port"   an point what is what and what  should look like  like what



Ive send all my coins on another PC and wallet now Im gonna try from scratch everything

1 stetp to make sure i have no IP problem  then "we shall see

For those who own VIVO. I just enabled VIVO following the guide!

Just create a different folder for Sentinel .exe and use a different port in rpcport=. I just used rpcport=9919

mninfo, please post your guide for VIVO community to receive proper respect for your work!

Yes, indeed. I would like to send some coins as well. Please provide your wallet.

I added TRUST to mninfo. Everyone else who ENABLEd their MNs thanks to him should do the same!