Topic: [ANN] Diamond DMD - new PoW/PoS coin | Super random blocks | Only 4.38 mil total - page 6. (Read 116381 times)
December 13, 2013, 11:42:51 PM
this was a great coin once with a great name, hope this will get fixed up and back on an exchange rather soon.
December 13, 2013, 11:26:41 PM
My rig discovered a 30-diamond-block on dmdpool.net yesterday. It is wonderful moment to me
Found it!
http://www.diamondblocks.info/block/00000000d13fe147f8f86dafdd49cb6b5f78447fb5510c733d576a59a29dc2c3
December 13, 2013, 11:25:04 PM
I have set up a Diamond Block Explorer
http://www.diamondblocks.info
It is using open source software called Abe
There are a few problems right now (coins displayed as 0.01 for example) but I will be working on fixing - also going to skin it with a real nice design soon. Any suggestions please send them my way!
http://www.diamondblocks.info
It is using open source software called Abe
There are a few problems right now (coins displayed as 0.01 for example) but I will be working on fixing - also going to skin it with a real nice design soon. Any suggestions please send them my way!
nice, still i wonder who has address dNNVDurRYnVYQw7kCkkxbrD8u1TwssN5cg
It says:
I'm sorry, this address has too many records to display.
API (machine-readable pages)
Well I removed the limit. Here are some interesting stats on DMDPool:
Balance: 2037 DMD
Transactions in: 9325
Received: 9569 DMD
Transactions out: 7277
Sent: 7532 DMD
I am debating turning the limit back on as a big query has the potential to kill system resources....
December 13, 2013, 11:09:30 PM
What's that all about ?
The question mark is orphan blocks, but the rest is all mined block with 0.00 value. If I check transaction details, there is a debit of 0.00 and a net amount of a negative number (they are all different). As this looks to be the PoS mining, why I get all these transactions with a 0 value? and I got a bunch more in my wallet. It's like I never got to succefully PoS and it's been a few months now... is this normal behavior? if not what is wrong?
Thanks
This is caused by the multiplication order in the code, and the payout is rounded to integer coin. To fix this, just change the multiplication order in the code and release a new version, and you will see the decimal PoS payout. A very easy fix in the code.
December 13, 2013, 10:59:54 PM
My rig discovered a 30-diamond-block on dmdpool.net yesterday. It is wonderful moment to me
December 13, 2013, 08:00:27 PM
I have set up a Diamond Block Explorer
http://www.diamondblocks.info
It is using open source software called Abe
There are a few problems right now (coins displayed as 0.01 for example) but I will be working on fixing - also going to skin it with a real nice design soon. Any suggestions please send them my way!
http://www.diamondblocks.info
It is using open source software called Abe
There are a few problems right now (coins displayed as 0.01 for example) but I will be working on fixing - also going to skin it with a real nice design soon. Any suggestions please send them my way!
nice, still i wonder who has address dNNVDurRYnVYQw7kCkkxbrD8u1TwssN5cg
It says:
I'm sorry, this address has too many records to display.
API (machine-readable pages)
That is dmdpool.net - I am going to try and fix that issue as well!
Also what I noticed is there should be an even number of coins ever created but it is not. It's also cool to look at the block and see when the "super blocks" were awarded. 30 diamond blocks are supposed to happen once a day but it seems a lot less infrequent than that.
We (dmdpool.net) have mined 3 times of 30-diamond-blocks, 11 times of 8-diamond-blocks, 59 times of 2-diamond-blocks during this first month.
December 13, 2013, 05:33:50 PM
I have set up a Diamond Block Explorer
http://www.diamondblocks.info
It is using open source software called Abe
There are a few problems right now (coins displayed as 0.01 for example) but I will be working on fixing - also going to skin it with a real nice design soon. Any suggestions please send them my way!
http://www.diamondblocks.info
It is using open source software called Abe
There are a few problems right now (coins displayed as 0.01 for example) but I will be working on fixing - also going to skin it with a real nice design soon. Any suggestions please send them my way!
nice, still i wonder who has address dNNVDurRYnVYQw7kCkkxbrD8u1TwssN5cg
It says:
I'm sorry, this address has too many records to display.
API (machine-readable pages)
That is dmdpool.net - I am going to try and fix that issue as well!
Also what I noticed is there should be an even number of coins ever created but it is not. It's also cool to look at the block and see when the "super blocks" were awarded. 30 diamond blocks are supposed to happen once a day but it seems a lot less infrequent than that.
December 13, 2013, 05:32:48 PM
I have set up a Diamond Block Explorer
http://www.diamondblocks.info
It is using open source software called Abe
There are a few problems right now (coins displayed as 0.01 for example) but I will be working on fixing - also going to skin it with a real nice design soon. Any suggestions please send them my way!
http://www.diamondblocks.info
It is using open source software called Abe
There are a few problems right now (coins displayed as 0.01 for example) but I will be working on fixing - also going to skin it with a real nice design soon. Any suggestions please send them my way!
nice, still i wonder who has address dNNVDurRYnVYQw7kCkkxbrD8u1TwssN5cg
It says:
I'm sorry, this address has too many records to display.
API (machine-readable pages)
dmdpool.net
December 13, 2013, 02:38:16 PM
I have set up a Diamond Block Explorer
http://www.diamondblocks.info
It is using open source software called Abe
There are a few problems right now (coins displayed as 0.01 for example) but I will be working on fixing - also going to skin it with a real nice design soon. Any suggestions please send them my way!
http://www.diamondblocks.info
It is using open source software called Abe
There are a few problems right now (coins displayed as 0.01 for example) but I will be working on fixing - also going to skin it with a real nice design soon. Any suggestions please send them my way!
Tripmode, are you sure that it's working properly?
Address should start with letter "d"...
The amount should be 1 (not 0.1)!
I have fixed both issues. If anyone else notices any bugs please let me know.
I hope to have my graphic designer friend give this front end an overhaul soon.
December 13, 2013, 02:29:35 PM
Ok so basically, I don't have enauhg stake (greater than 1) so I get 0. If I stake a bigger amount witch would result in a PoS > 0, then I should get the minted block... correct ?
Yes, so instead of having a 1 dmd input if you have say 100-1000 then you will actually get the stake > 0. Also you may want to keep wallet locked or stake generation turned off until it accumulates.
in that case is there something wrong? I have (for a while now) over 200 DMD but still no stake...
what about locked wallet? (how do you do that?)
and since I have over 200DMD do I still have to turn off stake generation? (and if I do, how it's turned off, I don't see the command in the console)
thanks again
this should answer all your questions:
https://bitcointalksearch.org/topic/ppcoin-proof-of-stake-minting-setup-guide-187714
December 13, 2013, 02:03:09 PM
Ok so basically, I don't have enauhg stake (greater than 1) so I get 0. If I stake a bigger amount witch would result in a PoS > 0, then I should get the minted block... correct ?
Yes, so instead of having a 1 dmd input if you have say 100-1000 then you will actually get the stake > 0. Also you may want to keep wallet locked or stake generation turned off until it accumulates.
in that case is there something wrong? I have (for a while now) over 200 DMD but still no stake...
what about locked wallet? (how do you do that?)
and since I have over 200DMD do I still have to turn off stake generation? (and if I do, how it's turned off, I don't see the command in the console)
thanks again
December 13, 2013, 01:27:03 PM
Ok so basically, I don't have enauhg stake (greater than 1) so I get 0. If I stake a bigger amount witch would result in a PoS > 0, then I should get the minted block... correct ?
Yes, so instead of having a 1 dmd input if you have say 100-1000 then you will actually get the stake > 0. Also you may want to keep wallet locked or stake generation turned off until it accumulates.
December 13, 2013, 01:24:19 PM
What's that all about ?
The question mark is orphan blocks, but the rest is all mined block with 0.00 value. If I check transaction details, there is a debit of 0.00 and a net amount of a negative number (they are all different). As this looks to be the PoS mining, why I get all these transactions with a 0 value? and I got a bunch more in my wallet. It's like I never got to succefully PoS and it's been a few months now... is this normal behavior? if not what is wrong?
Thanks
I will look at code but these are PoS blocks and I believe DMD is coded so that if stake <1 then = 0. Like some other PoS coins. In PHS you actually always get a small amount if below 1.
But, as many p2pool users find out on other coins, you have to send in smaller transactions when you eventually move them. Here is an example of a user today with the small PoS :
Ok so basically, I don't have enauhg stake (greater than 1) so I get 0. If I stake a bigger amount witch would result in a PoS > 0, then I should get the minted block... correct ?
December 13, 2013, 12:52:05 PM
What's that all about ?
The question mark is orphan blocks, but the rest is all mined block with 0.00 value. If I check transaction details, there is a debit of 0.00 and a net amount of a negative number (they are all different). As this looks to be the PoS mining, why I get all these transactions with a 0 value? and I got a bunch more in my wallet. It's like I never got to succefully PoS and it's been a few months now... is this normal behavior? if not what is wrong?
Thanks
I will look at code but these are PoS blocks and I believe DMD is coded so that if stake <1 then = 0. Like some other PoS coins. In PHS you actually always get a small amount if below 1.
But, as many p2pool users find out on other coins, you have to send in smaller transactions when you eventually move them. Here is an example of a user today with the small PoS :
December 13, 2013, 05:17:50 AM
What's that all about ?
The question mark is orphan blocks, but the rest is all mined block with 0.00 value. If I check transaction details, there is a debit of 0.00 and a net amount of a negative number (they are all different). As this looks to be the PoS mining, why I get all these transactions with a 0 value? and I got a bunch more in my wallet. It's like I never got to succefully PoS and it's been a few months now... is this normal behavior? if not what is wrong?
Thanks
December 13, 2013, 04:34:20 AM
Addresses are not hashing properly - and the values are 0.01 per coin. Will resolve soon need sleep!
December 13, 2013, 04:14:53 AM
I have set up a Diamond Block Explorer
http://www.diamondblocks.info
It is using open source software called Abe
There are a few problems right now (coins displayed as 0.01 for example) but I will be working on fixing - also going to skin it with a real nice design soon. Any suggestions please send them my way!
http://www.diamondblocks.info
It is using open source software called Abe
There are a few problems right now (coins displayed as 0.01 for example) but I will be working on fixing - also going to skin it with a real nice design soon. Any suggestions please send them my way!
Tripmode, are you sure that it's working properly?
Address should start with letter "d"...
The amount should be 1 (not 0.1)!
December 13, 2013, 04:12:24 AM
Ppl stay tuned.
All pools will be online very soon!
DMDpool.net
All pools will be online very soon!
DMDpool.net
Updated to forkfix!:
https://github.com/palmd/diamondcoin
Forkfix win client (must download new chain to use!)
https://sourceforge.net/projects/philosopherstone/files/DMD/
Instructions for new forkfix client: (Windows)
Make sure to clear directory of old chain, peers, everything except wallet and .conf file.
Start new client and allow to DL chain (client will show syncing until it is past the fork, this may take DAYS, but will accept solo mining and can make blocks!)
then solo mine
done.
Make sure to delete old blockchain files (except wallet and .conf) or you will end up on dead fork
DMD!= dMUWewcXaqqA3bPnKA4ch6u8gmxTv3kZtk
Please do not do solo mining yourself. Join DMDpool.net to mine together to secure the network
the client still say "checkpoint is too old. wait for block chain to download or notify developers."
It will be fixed very soon through new client update.
December 13, 2013, 04:07:27 AM
Ppl stay tuned.
All pools will be online very soon!
DMDpool.net
All pools will be online very soon!
DMDpool.net
Updated to forkfix!:
https://github.com/palmd/diamondcoin
Forkfix win client (must download new chain to use!)
https://sourceforge.net/projects/philosopherstone/files/DMD/
Instructions for new forkfix client: (Windows)
Make sure to clear directory of old chain, peers, everything except wallet and .conf file.
Start new client and allow to DL chain (client will show syncing until it is past the fork, this may take DAYS, but will accept solo mining and can make blocks!)
then solo mine
done.
Make sure to delete old blockchain files (except wallet and .conf) or you will end up on dead fork
DMD!= dMUWewcXaqqA3bPnKA4ch6u8gmxTv3kZtk
Please do not do solo mining yourself. Join DMDpool.net to mine together to secure the network
the client still say "checkpoint is too old. wait for block chain to download or notify developers."
December 13, 2013, 03:03:44 AM
I have set up a Diamond Block Explorer
http://www.diamondblocks.info
It is using open source software called Abe
There are a few problems right now (coins displayed as 0.01 for example) but I will be working on fixing - also going to skin it with a real nice design soon. Any suggestions please send them my way!
http://www.diamondblocks.info
It is using open source software called Abe
There are a few problems right now (coins displayed as 0.01 for example) but I will be working on fixing - also going to skin it with a real nice design soon. Any suggestions please send them my way!
!!!!!
DMD Community is alive!
Jump to: