Author

Topic: [ANN] ¤ DMD Diamond 3.0 | Scarce ¤ Valuable ¤ Secure | PoS 3.0 | Masternodes 65% - page 669. (Read 1260677 times)

hero member
Activity: 609
Merit: 500
DMD,XZC
Net Hashrate 14,255.56 MH/s wow
i have about 3G
dmdpool had 3.8G few hours ago ,now  it is 3.4G
miningfield 200M
i don't know other pools,seems there is a 7G giant in the dark side


hero member
Activity: 742
Merit: 500
Net Hashrate 15,177.61 MH/s wow
legendary
Activity: 3052
Merit: 1053
bit.diamonds | uNiq.diamonds
additional i want to say DMD Cloudmining investments
that arrive early enough for october will earn
free october reinvest shares at start of november
legendary
Activity: 3052
Merit: 1053
bit.diamonds | uNiq.diamonds

this deserve a place on next thread page too
same as a link to the last review of DMD on
http://blog.btcgermany.eu/why-you-should-invest-in-diamonds-dmd/

Coinrollout Plan updates 2014.10.20 in Blue

VISUALIZATION OF DIAMOND ROLL-OUT PLAN
(TOTAL COINS AND POW/POS COINS PER MONTH)




RED LINE = new coins each month produced by POW (numbers on right side)
GREEN LINE = new coins produced each month by POS (numbers on right side)
TOTAL COINS (numbers on left side)
numbers on bottom of graphic are the months (the graphic represent a 30 year timeline)

i think for now market price is driven by insta-selling miners
daily *1500 diamonds have to be bought if people would sell instant


At the moment the buy pressure is way more than the sell pressure which result in a constant gain of value

but keep a closer eye on coin specs and check how coin roll-out will develop over next 30 years

beginning with total coins 450000 a 50% POS will be simultaneous active with the 1 DMD POW reward each block
and start the diamond rush (BLUE CIRCLE) on pic

if u analyze that u can see that this POW mining paradise only last a few months
(to be exact until 1 million total diamond are existing)
later most of coins are produced by POS  (GREEN ARROW) and to do so u need to have diamonds

everyone who sell 1 diamonds instant lose like at least 2 diamonds.....
because every diamond u mine now would at least double if u keep holding and pos it over time

or as a community member said buy 1000 DMD and see them grow 10 DMD each week by POS additional to the market value gains

the whole design of diamond is to be a wealth storage coin aimed to be a good investment

i  hope this visualization of coin specs long-term effect of  on coin roll-out
can help u realize how valuable diamonds will be once POW is reduced by 90%
and high POS will be main source of coin creation

that coins are required to create more coins (POS)
will be the reason for lower availability of coins on exchanges and increasing prices
remember only coins in ur wallet gather coin-age and can generate POS rewards

Additional http://multipool.bit.diamonds/ and DMD Cloudmining see details below create daily Buy pressure and backup the coin value growth and stability

The upcoming partnership with noblecoin marketplace and their great e-commerce possibility
the start of a DMD-Groestl Algo merged mining family
and community driven sideprojects like DiamondOS (USB-Bootable DMD Wallet)
or upcoming online wallet / Android  Wallet / etc etc

let the future look bright for DMD Diamond



Second half of month is referal bonus 2% of investment u did refer to us (and the investor get 1% bonus shares for tell us a referer wallet)
time to spread the news!

http://multipool.bit.diamonds/
[email protected]



whats the best way to invest into DMD
in my opinion u should split ur investment
50% direct buy DMD and 50% into dmd cloudmining
this way u maximize ur profit and stabilze the coin upwards trend
and get additional DMD over time not only from POS but also from DMD Cloudmining
http://multipool.bit.diamonds/
[email protected]

if ya invest into DMD cloudmining
make sure u tell me a wallet of a already existing DMD cloudmining user
so u and he get bonus shares

im sure u will find such a wallet if ya ask in this thread if u found us without referal
this way u still can get the bonus shares


legendary
Activity: 3052
Merit: 1053
bit.diamonds | uNiq.diamonds

Net Hashrate 12,240.19 MH/s
Asic?
no ,i solo mining,add 200+ 280x
100+ 280x seems impossible to find a block


with that amount of miners u run a private pool?
DMD mining pools need special setup

try a existing pool and u will find blocks

and if ya ask around there are people around who can give some tips how u set up a pool
i dig the wallet
ok sorry i did read it wrong did think u run 200x amd280 cards but u mean 200 mhash?

its easy if nethash is 12000 mhash then ur 200 are 1.6%
so u find average 1 diamond a hours 24 a day
yes buy on exchange is cheaper
hero member
Activity: 609
Merit: 500
DMD,XZC

Net Hashrate 12,240.19 MH/s
Asic?
no ,i solo mining,add 200+ 280x
100+ 280x seems impossible to find a block


with that amount of miners u run a private pool?
DMD mining pools need special setup

try a existing pool and u will find blocks

and if ya ask around there are people around who can give some tips how u set up a pool
i dig the wallet
legendary
Activity: 3052
Merit: 1053
bit.diamonds | uNiq.diamonds
i hate cryptsy,any new exchanges? what about bittrex?

go for it!
everyone free to start a initiative
on any exchange u find we should be

after mintpal and usecryptos im tired run such campaigns and the company explode
or the exchange is just not used by people

we bound in a hate love to cryptsy for now
they did stand with us when we had troubles
and we stand with them when they have troubles
legendary
Activity: 3052
Merit: 1053
bit.diamonds | uNiq.diamonds

Net Hashrate 12,240.19 MH/s
Asic?
no ,i solo mining,add 200+ 280x
100+ 280x seems impossible to find a block


with that amount of miners u run a private pool?
DMD mining pools need special setup

try a existing pool and u will find blocks

and if ya ask around there are people around who can give some tips how u set up a pool
hero member
Activity: 609
Merit: 500
DMD,XZC

Net Hashrate 12,240.19 MH/s
Asic?
no ,i solo mining,add 200+ 280x
100+ 280x seems impossible to find a block
hero member
Activity: 609
Merit: 500
DMD,XZC
it is too hard to dig a diamond,maybe i should buy,
i hate cryptsy,any new exchanges? what about bittrex?
hero member
Activity: 742
Merit: 500

Net Hashrate 12,240.19 MH/s
Asic?
member
Activity: 116
Merit: 10
Hello Guys, i'm new to dmd mining...

I've been havin' some trouble with 2 Laptops that i' trying to run workers from...

On Both i'm using ccminer since they have this Graphics cards:

Nvidia GForce GT 330M
Nvidia GForce GT 425M

the miner runs, it connects it mines...
it shows "new block detected" from time to time...
it gives me the Hash rate on both...

but it doesn't show as 'active' on the mining pool that i'm using... (miningfield)

i tried to solve this with the internal help support from them and nothing seams to work... :\
i've tried to change the port from 3389 to 3388 and backwards...
i've tried the second ccminer.exe file that comes along on the zip file...
ive tried changing the difficulty level...
(by the way, if i put this command: --difficulty-multiplier 0.0039062500 or --difficulty-multiplier=0.0039062500  the file wont run... it shuts down...)

btw... they said that it should be giving me some message about "accepted" or "rejected shares".... it doesn't show any of that!

can anyone help me with this? Smiley

Those Cards don't show on the compatibily list for ccminer.


http://cryptomining-blog.com/2668-what-version-of-ccminer-to-use-for-your-nvidia-geforce-gpu/


I guess it's because they are "M" models, for Laptops, not the best chooice for mining.


s. http://www.miningfield.com
t. https://www.twitter.com/miningfield
f. https://www.facebook.com/miningfield
DMD Pool. http://dmd.miningfield.com
full member
Activity: 150
Merit: 101
The hen or the egg
Yes, i've tried that :\
i've tried to change the port from 3389 to 3388 and backwards...
i've tried the second ccminer.exe file that comes along on the zip file...
ive tried changing the difficulty level...
(by the way, if i put this command: --difficulty-multiplier 0.0039062500 or --difficulty-multiplier=0.0039062500  the file wont run... it shuts down...)

Also use --normal-hashing 1 and  --difficulty-multiplier 0.0039062500

Sorry I had to take a nap, been busy lately ... try http://utahjohn.ddns.net I am mining fine there in USA

I use advanced sgminer.conf but these should work command line with batch file ...

Also if u are using catalyst 14.9 this can also be a problem ... revert to catalyst 14.7 RC3

See https://bitcointalksearch.org/topic/x11mod-x13mod-x15-and-catalyst-147-rc-666252

Catalyst?... isn't that for AMD??...
(i'm using Nvidia Cards...)

Hello Josevora.  I run multiple 750 ti's on miningfield with no problems.  I definitely get accepted/rejected.  I use ccminer 1.2 with the following config.  
ccminer35-50.exe -q -s 1 -a dmd-gr -o stratum+tcp://dmd.miningfield.com:3389 -u x -p x
What is the speed of your NVidia processors?  Do you have their compute set properly?  Also, do you have the right algo chosen?

Hi again Josevora.
I have used 750ti and everything worked fine with ccminer 1.2. The 750ti have compute capability version 5.0 and ccminer 1.2 supports compute capabilities from 3.0 and higher. I haven't used any of your cards but my guess is that you need to use an older version of ccminer that supports older versions of compute capabilities. Or have you tested that already? Since your 425M have compute capability version 2.1 I suppose that ccminer 1.0 could work. Your 330M have compute capability version 1.2 so maybe you even have to test an older cudaminer for that one. But since I haven't tested it myself this is just some thoughts and ideas on how to resolve your problem. Good luck!
legendary
Activity: 1414
Merit: 1013
DMD info: https://diamond-info.github.io/
Difficulty close to 250, that is a quite steep rise. Could that be some kind of Diff. Pump?

Maybe someone has already done Asic chips for the Groestl algorithm?
member
Activity: 134
Merit: 12
Difficulty close to 250, that is a quite steep rise. Could that be some kind of Diff. Pump?
hero member
Activity: 630
Merit: 500
miningfield.com down Huh I just tried to send an email support request Huh
NOMP no longer supported by original dev Huh


-------- Original Message --------
Subject:    Re: [node-open-mining-portal] I find this really disturbing NOMP no longer supported (#404)
Date:    Fri, 24 Oct 2014 19:53:02 -0700
From:    crackfoo <[email protected]>
Reply-To:    zone117x/node-open-mining-portal
To:    zone117x/node-open-mining-portal <[email protected]>
CC:    utahjohn <[email protected]>


there have already been donations and bounties met, yet the development not
done.

On Fri, Oct 24, 2014 at 11:50 PM, utahjohn <[email protected]> wrote:

> I am a NOMP user and there are many others ... why has this been abandoned
> Huh open source projects always take a while to see donations, why has this
> been abadoned Huh
>
> —
> Reply to this email directly or view it on GitHub
> .
>


Reply to this email directly or view it on GitHub

Sorry but this is important ...
 
legendary
Activity: 1504
Merit: 1002
Yes, i've tried that :\
i've tried to change the port from 3389 to 3388 and backwards...
i've tried the second ccminer.exe file that comes along on the zip file...
ive tried changing the difficulty level...
(by the way, if i put this command: --difficulty-multiplier 0.0039062500 or --difficulty-multiplier=0.0039062500  the file wont run... it shuts down...)

Also use --normal-hashing 1 and  --difficulty-multiplier 0.0039062500

Sorry I had to take a nap, been busy lately ... try http://utahjohn.ddns.net I am mining fine there in USA

I use advanced sgminer.conf but these should work command line with batch file ...

Also if u are using catalyst 14.9 this can also be a problem ... revert to catalyst 14.7 RC3

See https://bitcointalksearch.org/topic/x11mod-x13mod-x15-and-catalyst-147-rc-666252

Catalyst?... isn't that for AMD??...
(i'm using Nvidia Cards...)

Hello Josevora.  I run multiple 750 ti's on miningfield with no problems.  I definitely get accepted/rejected.  I use ccminer 1.2 with the following config. 
ccminer35-50.exe -q -s 1 -a dmd-gr -o stratum+tcp://dmd.miningfield.com:3389 -u x -p x
What is the speed of your NVidia processors?  Do you have their compute set properly?  Also, do you have the right algo chosen?
hero member
Activity: 630
Merit: 500
Yes, i've tried that :\
i've tried to change the port from 3389 to 3388 and backwards...
i've tried the second ccminer.exe file that comes along on the zip file...
ive tried changing the difficulty level...
(by the way, if i put this command: --difficulty-multiplier 0.0039062500 or --difficulty-multiplier=0.0039062500  the file wont run... it shuts down...)

Also use --normal-hashing 1 and  --difficulty-multiplier 0.0039062500

Sorry I had to take a nap, been busy lately ... try http://utahjohn.ddns.net I am mining fine there in USA

I use advanced sgminer.conf but these should work command line with batch file ...

Also if u are using catalyst 14.9 this can also be a problem ... revert to catalyst 14.7 RC3

See https://bitcointalksearch.org/topic/x11mod-x13mod-x15-and-catalyst-147-rc-666252

Catalyst?... isn't that for AMD??...
(i'm using Nvidia Cards...)

for nvidia I have no idea command line ... keep asking someone here will help
newbie
Activity: 3
Merit: 0
Yes, i've tried that :\
i've tried to change the port from 3389 to 3388 and backwards...
i've tried the second ccminer.exe file that comes along on the zip file...
ive tried changing the difficulty level...
(by the way, if i put this command: --difficulty-multiplier 0.0039062500 or --difficulty-multiplier=0.0039062500  the file wont run... it shuts down...)

Also use --normal-hashing 1 and  --difficulty-multiplier 0.0039062500

Sorry I had to take a nap, been busy lately ... try http://utahjohn.ddns.net I am mining fine there in USA

I use advanced sgminer.conf but these should work command line with batch file ...

Also if u are using catalyst 14.9 this can also be a problem ... revert to catalyst 14.7 RC3

See https://bitcointalksearch.org/topic/x11mod-x13mod-x15-and-catalyst-147-rc-666252

Catalyst?... isn't that for AMD??...
(i'm using Nvidia Cards...)
hero member
Activity: 630
Merit: 500
Yes, i've tried that :\
i've tried to change the port from 3389 to 3388 and backwards...
i've tried the second ccminer.exe file that comes along on the zip file...
ive tried changing the difficulty level...
(by the way, if i put this command: --difficulty-multiplier 0.0039062500 or --difficulty-multiplier=0.0039062500  the file wont run... it shuts down...)

Also use --normal-hashing 1 and  --difficulty-multiplier 0.0039062500

Sorry I had to take a nap, been busy lately ... try http://utahjohn.ddns.net I am mining fine there in USA

I use advanced sgminer.conf but these should work command line with batch file ...

Also if u are using catalyst 14.9 this can also be a problem ... revert to catalyst 14.7 RC3

See https://bitcointalksearch.org/topic/x11mod-x13mod-x15-and-catalyst-147-rc-666252
Jump to: