What is your diamond.json? Something like this?
Code:
{
"name": "Diamondcoin",
"symbol": "DMD",
"algorithm": "groestl",
"txMessages": true
}Thanks!
Topic: [ANN] ¤ DMD Diamond 3.0 | Scarce ¤ Valuable ¤ Secure | PoS 3.0 | Masternodes 65% - page 820. (Read 1260706 times)
May 12, 2014, 03:42:44 AM
Hi pool operators using NOMP!
What is your diamond.json? Something like this?
Thanks!
What is your diamond.json? Something like this?
Thanks!
May 12, 2014, 03:18:12 AM
So, if I understand correctly, POS should start with block 400000, which will be today. Can anyone enlighten me on how exactly this will work?
I read something about 30 days, does that mean I have to have the wallet open for 30 days or just that I have to hold the coins for 30 days?
How will I get the coins I "mined" with POS? Will they just appear in my wallet or do I need to run the miner / something?
Thanks!
EDIT: ninja'd
I read something about 30 days, does that mean I have to have the wallet open for 30 days or just that I have to hold the coins for 30 days?
How will I get the coins I "mined" with POS? Will they just appear in my wallet or do I need to run the miner / something?
Thanks!
EDIT: ninja'd
May 12, 2014, 03:17:04 AM
We are only about 40 blocks from block 400,000 when the PoS stage is supposed to start. From reading the OP, you have to have had the coins in your wallet for a minimum of 30 days before PoS mining works. Is that correct?
May 12, 2014, 02:19:57 AM
A pre-compiled Ubuntu 14.4 binary of sph-sgminer is available for download here http://dmdpool.digsys.bg/download/sph-sgminer-ubuntu.zip
Please note that it may have dependencies for few libraries, that are not installed on your system. Just add them with apt-get install. Until it runs
The miner should be used with the '-k diamond' switch, to select the proper kernel for Diamond v2.0.
Happy mining.
Please note that it may have dependencies for few libraries, that are not installed on your system. Just add them with apt-get install. Until it runs
The miner should be used with the '-k diamond' switch, to select the proper kernel for Diamond v2.0.
Happy mining.
I don't recommend using Ubuntu 14.4 for mining. It has several bugs and in certain occasions tends to crash the GPUs. I would recommend instead 12.04 LTS as it has been thoroughly used and tested throughout the mining community. Stay away from 12.10 as support ended in April.
Absolutely agree. I just wanted to mention that the binary was compiled on Ubuntu 14.4.
Yeap, I understood. Just letting the new comers know so that they don't rush to 14.4 just because they saw that the binary was compiled on 14.4
BTW, been hashing nicely since yesterday on the pool. Good job.
May 12, 2014, 02:06:41 AM
how to turn off the sound on dmdpool.digsys.bg?
May 12, 2014, 01:58:41 AM
If somebody wants to set up BAMT with this sgminer, follow my guide here: http://groestlcoin.org/forum/index.php?topic=12.0
But after step 6, before step 7 do this:
And obviously change kernel from "groestlcoin" into "diamond" in your .conf file
But after step 6, before step 7 do this:
Code:
git remote set-url origin git://github.com/danbi/sph-sgminer
And obviously change kernel from "groestlcoin" into "diamond" in your .conf file
May 12, 2014, 01:57:05 AM
http://omargpools.ca/dmd
Come join us!
- Hosted in Canada
- Dedicated Server Located On Site
- Proportional Payout System
- 1% Fee
- Transaction Fees Paid to Miners
- Single Registration for ALL Pools
- Donations are greatly appreciated as always
The client is currently syncing. When complete the stratum will start
May 12, 2014, 01:34:42 AM
Source code fixes to sph-sgminer published at https://github.com/danbi/sph-sgminer.
Hope to have it soon merged with the main branch. You can compile your own version. Let's hope someone does it for Windows users.
Hope to have it soon merged with the main branch. You can compile your own version. Let's hope someone does it for Windows users.
Hi!
I've set up a NOMP pool and compiled your miner in BAMT.
But when I run it, I'm getting only rejects with text like:
Code:
low difficulty share of 0.233/0.125.
Do I need to set some other difficulty muliplier?
Also, could somebody share a Windows binary?
Thanks
May 12, 2014, 01:21:29 AM
A pre-compiled Ubuntu 14.4 binary of sph-sgminer is available for download here http://dmdpool.digsys.bg/download/sph-sgminer-ubuntu.zip
Please note that it may have dependencies for few libraries, that are not installed on your system. Just add them with apt-get install. Until it runs
The miner should be used with the '-k diamond' switch, to select the proper kernel for Diamond v2.0.
Happy mining.
Please note that it may have dependencies for few libraries, that are not installed on your system. Just add them with apt-get install. Until it runs
The miner should be used with the '-k diamond' switch, to select the proper kernel for Diamond v2.0.
Happy mining.
I don't recommend using Ubuntu 14.4 for mining. It has several bugs and in certain occasions tends to crash the GPUs. I would recommend instead 12.04 LTS as it has been thoroughly used and tested throughout the mining community. Stay away from 12.10 as support ended in April.
Absolutely agree. I just wanted to mention that the binary was compiled on Ubuntu 14.4.
May 11, 2014, 10:48:10 PM
anyone successfully staked yet?
does staking work on the latest wallet?
POS has not started and will work once we hit block 40000 if iam correct on current wallet does staking work on the latest wallet?
https://www.allcrypt.com/market?id=732# good its been listed no one selling or buying yet...
May 11, 2014, 10:23:45 PM
anyone successfully staked yet?
does staking work on the latest wallet?
does staking work on the latest wallet?
May 11, 2014, 07:32:55 PM
A pre-compiled Ubuntu 14.4 binary of sph-sgminer is available for download here http://dmdpool.digsys.bg/download/sph-sgminer-ubuntu.zip
Please note that it may have dependencies for few libraries, that are not installed on your system. Just add them with apt-get install. Until it runs
The miner should be used with the '-k diamond' switch, to select the proper kernel for Diamond v2.0.
Happy mining.
Please note that it may have dependencies for few libraries, that are not installed on your system. Just add them with apt-get install. Until it runs
The miner should be used with the '-k diamond' switch, to select the proper kernel for Diamond v2.0.
Happy mining.
I don't recommend using Ubuntu 14.4 for mining. It has several bugs and in certain occasions tends to crash the GPUs. I would recommend instead 12.04 LTS as it has been thoroughly used and tested throughout the mining community. Stay away from 12.10 as support ended in April.
May 11, 2014, 05:58:34 PM
A pre-compiled Ubuntu 14.4 binary of sph-sgminer is available for download here http://dmdpool.digsys.bg/download/sph-sgminer-ubuntu.zip
Please note that it may have dependencies for few libraries, that are not installed on your system. Just add them with apt-get install. Until it runs
The miner should be used with the '-k diamond' switch, to select the proper kernel for Diamond v2.0.
Happy mining.
Please note that it may have dependencies for few libraries, that are not installed on your system. Just add them with apt-get install. Until it runs
The miner should be used with the '-k diamond' switch, to select the proper kernel for Diamond v2.0.
Happy mining.
May 11, 2014, 05:40:39 PM
DiamondCoin has been added to AllCrypt.com!
That's a great exchange to get diamond listed on.
May 11, 2014, 05:35:44 PM
@danbi: the cashing out button is red and can't be clicked. theres more than 1 DMD still there that I'd like to withdraw.
is it currently not activated?
is it currently not activated?
The previous Diamond wallet had block confirmation requirement of 60 blocks, so this was how the pool was set up. The new wallet requires 180 confirmations. The pool needs to obey this, as blocks with age under 180 can turn into orphans at any moment (although with this single pool hashing more than half of the network this is surely not possible right now).
So you need to wait 180 blocks for your earnings to mature and you can withdraw.
During the confirmation window switch, a nasty bug was discovered (will be addressed soon, patched for now) that resulted in about 10,000 blocks being unconfirmed and thus the pool refusing payouts. Even if this was for a short moment, you may have observed it. It is ok now.
May 11, 2014, 05:25:14 PM
DiamondCoin has been added to AllCrypt.com!
That's great! Thank you
May 11, 2014, 05:18:22 PM
DiamondCoin has been added to AllCrypt.com!
May 11, 2014, 04:51:11 PM
@danbi: the cashing out button is red and can't be clicked. theres more than 1 DMD still there that I'd like to withdraw.
is it currently not activated?
btw, because diff is 20x that before the huge fuck up I can't CPU mine anymore anyway, but thanks for your effort! you've shown dedication and presence (why dont you code a coin lol)
is it currently not activated?
btw, because diff is 20x that before the huge fuck up I can't CPU mine anymore anyway, but thanks for your effort! you've shown dedication and presence (why dont you code a coin lol)
May 11, 2014, 04:46:55 PM
Just a note: discovered that the pool confirmations were set at 60 blocks but the current wallet confirms blocks at 180 confirmations. So I decided to update it. The new setting sort of confused MPOS and it will take some time to clear up -- do not be surprised if large payout suddenly "does not work". It will.
EDIT: the pool has already passed 1 Ghash/s, wow! Do not worry, the server is barely noticing the load.
EDIT: the pool has already passed 1 Ghash/s, wow! Do not worry, the server is barely noticing the load.
Yeah, I figured that's what happened when I saw a good part of my confirmed balance go unconfirmed.
The web interface is working perfectly now. Everything's refreshing correctly, the dashboard is streaming, and the three little beeps with each new block found are even coming through loud and clear!
Currently about 2/3 the network hashrate though - so if there's any 51% attack, just remember, we know where you live.
May 11, 2014, 04:32:51 PM
did you made changes in stratum code or only in miner ?
I gave up on ahmed's stratum-mining, which I was using previously and switched to NOMP. When used in MPOS compatible mode, it functions just as stratum server and includes support for groestl. I did a lot of modifications there, in attempts to make stratum mining work, but, at the end it turned out it does not need any changes.
The pushpool server however had to be modified in order to include support for groestl. I will try to find some time to publish the modifications, although they are trivial.
Jump to: