[ANN] [DRZ] [DROIDZ] [ANTI-INSTAMINE] - A FRESH NEW START - WALLET UPDATES!!!

soopy452000

legendary

Activity: 1302

Merit: 1001

Founder - NavCoin Ⓝ

Alright guys , brand new thread is up.

Please continue your rantings there. Haha!

https://bitcointalksearch.org/topic/ann-drz-v3-droidz-v3-anti-instamine-a-fresh-new-start-wallet-301-1366516

Warm Regards,
~SoopY~

chrysophylax

legendary

Activity: 2940

Merit: 1091

--- ChainWorks Industries ---

Quote from: soopy452000 on February 16, 2016, 09:03:08 AM

Thank you all for your kind comments and words , appreciate it.

Yes the masternode requirment has been brought down to 25,000.

Levedb issues have been fixed on the github commit.

Please refer.

https://github.com/DroidzDevTeam/Droidz-V3

Swap information will be available by tomorrow.

Warm Regards,
~SoopY~

PS: Please node the seednodes have been updated again and a new Windows Wallet was compiled , please download and use it to sync faster.

tanx for updating the official git soopy ...

much appreciated ...

saved me a bit of work Wink

... hehehe ...

#crysx

soopy452000

legendary

Activity: 1302

Merit: 1001

Founder - NavCoin Ⓝ

Quote from: Jazzycrypt on February 16, 2016, 06:00:34 AM

i am drz v2.4 holder and coins are in staking process (not available for sending), i had unloaded v2.4 client now, made backup .dat. Is it ok to me to unzip v3 blockchain and v3 client ? Or i need to wait main part of staking coins be available? After that my coins would be on a new v3 chain?

We haven't started the swap process for DROIDZ-V2 to V3 mate , please keep an eye for it here. You cannot use the Droidz-V3 Client just yet , unless you have already swapped your Droidz-V2 Coins , please keep your wallet.dat of Droidz-V2 safe , untill further notice.

Warm Regards,
~SoopY~

PS: Its time to move on to a new thread. Hang on.

soopy452000

legendary

Activity: 1302

Merit: 1001

Founder - NavCoin Ⓝ

Thank you all for your kind comments and words , appreciate it.

Yes the masternode requirment has been brought down to 25,000.

Levedb issues have been fixed on the github commit.

Please refer.

https://github.com/DroidzDevTeam/Droidz-V3

Swap information will be available by tomorrow.

Warm Regards,
~SoopY~

PS: Please node the seednodes have been updated again and a new Windows Wallet was compiled , please download and use it to sync faster.

soopy452000

legendary

Activity: 1302

Merit: 1001

Founder - NavCoin Ⓝ

Quote from: soopy452000 on February 15, 2016, 05:17:02 PM

Dear All,

The update is ready, please be kind to download them below.

Here's the wallet and the blockchain , please backup your wallet.dat and delete everything else and use this blockchain zip extract the following blockchain to your %APPDATA%Droidz2. BACKUP YOUR WALLET.DAT first.

Droidz-V3 3.0.1. Windows Wallet

https://www.dropbox.com/s/w8ihtfrotkc72yt/Droidz-V3%203.0.1%20Windows%20Wallet.zip?dl=0

Droidz-V3 Blockchain

Please use this only and extract the contents to your %APPDATA%Droidz2 , before running the client.

https://www.dropbox.com/s/i5mtqi0xq4zl1k3/Droidz-V3%20Blockchain%20PLEASE%20ONLY%20USE%20THIS.zip?dl=0

Please help make connections as the network will not have any connections till the seednodes are updated, which I'm sure Chryx will do the attend to within the next few hours , meanwhile what you can do is share your personal nodes within the community and help make the network move and most of all stake your coins.

I will commit the changes to github within the next few hours.

All previous Client Versions have been blocked out as this is a mandatory update and due to the fact that this hardfork is mandatory and incompatible with previous clients.

Please follow the instructions carefully before running the client.

Warm Regards,
~SoopY~

chrysophylax

legendary

Activity: 2940

Merit: 1091

--- ChainWorks Industries ---

Quote from: bumbacoin on February 16, 2016, 08:13:32 AM

Quote from: chrysophylax on February 16, 2016, 06:19:21 AM

Quote from: bumbacoin on February 16, 2016, 04:33:32 AM

changed masternode requirements to 25000 ??

https://github.com/chrysophylax69/drz3-tmp/blob/master/src/main.h#L98

the code there is placed on the drz-tmp git as a momentary compile ...

that is the code that is causing the compile issue ...

the official code is NOT on my git at the moment - and when it does get there - it will only be there to compile the seednodes initially - THEN placed on the official git - which soopy and i will release to the community when its sorted ...

and yes - that is the current masternode amount for now ...

we want to organize the seeds THEN the wallets THEN git and compilations ... but none of it can happen without the official code ...

#crysx

the only problem i had compiling an ubuntu deamon was needing to clean the leveldb folder,
apart from that, it was fine.

i have two "coalition" peers that are currently on block 23827
hmm but mine is reporting as "blaze"

edit
woot staked a few blocks up to 23842, moneysupply is now 8017455

yup - the new wallet is 3.0.1.0 blaze ...

the testnode compiled and is running well - the seednodes have now been compiled and propagated also ...

one more to complete and all three will be able to service the entire network ...

they can take a heavy load - so its not an issue ...

so far so good - we will have it all functioning very soon ...

Code:

[drz-node@test ~]$ droidz3d getinfo
{
    "version" : "v3.0.1.0: Blaze",
    "protocolversion" : 61402,
    "walletversion" : 60000,
    "balance" : 0.00000000,
    "newmint" : 0.00000000,
    "stake" : 0.00000000,
    "blocks" : 23855,
    "timeoffset" : 0,
    "moneysupply" : 8017467.62077790,
    "connections" : 4,
    "proxy" : "",
    "ip" : "51.254.119.94",
    "difficulty" : {
        "proof-of-work" : 0.02972346,
        "proof-of-stake" : 2056.60252027
    },
    "testnet" : false,
    "keypoololdest" : 1453728624,
    "keypoolsize" : 101,
    "paytxfee" : 0.00010000,
    "mininput" : 0.00000000,
    "errors" : ""
}

so hold on a little while longer and we will be off and running ...

btw bumba ... ill be removing the drz3-tmp git soon ... the uptodate git currently is - https://github.com/chrysophylax69/Droidz-V3 ... that is the current code that the wallets should be built from - but that will change as soon as we get these other things out of the way - including the swap ... we will have an 'official' git for droidzdevteam ... but will wait till soopy updates on the swap and wallet processes ...

a new windows wallet is currently being built as we write ...

i can already see the seednodes going crazy ... its all working fine so far ... and you CAN sync from the beginning if you wish ...

Cheesy

...

#crysx

bumbacoin

legendary

Activity: 1638

Merit: 1036

Quote from: chrysophylax on February 16, 2016, 06:19:21 AM

Quote from: bumbacoin on February 16, 2016, 04:33:32 AM

changed masternode requirements to 25000 ??

https://github.com/chrysophylax69/drz3-tmp/blob/master/src/main.h#L98

the code there is placed on the drz-tmp git as a momentary compile ...

that is the code that is causing the compile issue ...

the official code is NOT on my git at the moment - and when it does get there - it will only be there to compile the seednodes initially - THEN placed on the official git - which soopy and i will release to the community when its sorted ...

and yes - that is the current masternode amount for now ...

we want to organize the seeds THEN the wallets THEN git and compilations ... but none of it can happen without the official code ...

#crysx

the only problem i had compiling an ubuntu deamon was needing to clean the leveldb folder,
apart from that, it was fine.

i have two "coalition" peers that are currently on block 23827
hmm but mine is reporting as "blaze"

edit
woot staked a few blocks up to 23842, moneysupply is now 8017455

bumbacoin

legendary

Activity: 1638

Merit: 1036

Quote from: Jazzycrypt on February 16, 2016, 06:00:34 AM

i am drz v2.4 holder and coins are in staking process (not available for sending), i had unloaded v2.4 client now, made backup .dat. Is it ok to me to unzip v3 blockchain and v3 client ? Or i need to wait main part of staking coins be available? After that my coins would be on a new v3 chain?

if you have problems with yr coins continually staking,
you can enter this line in yr droidz.conf
staking=0

first stop yr client Wink

, enter the line into droidz.conf, then restart,
it will stop any coins you hold from restaking when they're eligible

you will need to swap those coins for new droidz, just keep checking on thread here until someone posts a how to swap them

drays

legendary

Activity: 2576

Merit: 1073

Quote from: Jazzycrypt on February 16, 2016, 06:00:34 AM

i am drz v2.4 holder and coins are in staking process (not available for sending), i had unloaded v2.4 client now, made backup .dat. Is it ok to me to unzip v3 blockchain and v3 client ? Or i need to wait main part of staking coins be available? After that my coins would be on a new v3 chain?

Hmm... I wanted to post you an answer, then I realized I don't actually know the answer

I guess the short answer is 'No, please hold with OLD-DRZ for now, as this update relates only to new chain', but I cannot tell much more than that, as no details on the swap procedure are known.

Could some of the EXPERTS (TM)

give a detailed (not necessarily very long though) answer to this question, and probably shed some light on the supposed swap procedure, so people could be informed and do not do wrong things, which may result in lost time, or lost coins..?

chrysophylax

legendary

Activity: 2940

Merit: 1091

--- ChainWorks Industries ---

Quote from: GREEDYJOHN on February 16, 2016, 06:46:13 AM

Alright, you are all experts.

I am just giving credit to soopy Cheesy

We all deserve credit also Cheesy

its not that greedyjohn ... its the fact that we are ALL doing what we can here - AND - making sure its done right FIRST TIME as best as we can make it ...

we do NOT want an issue with this if it can be helped ...

we dont expect a flawless run - but minimizing the issues is the best we can do at the moment - and it does take ALL of our cooperation to get it to that stage ...

so yes - WE are ALL experts ... this couldnt happen without all of us doing our part ... and yes - WE all deserve credit for it ...

WE = droidzdevteam + you + community ...

#crysx

GREEDYJOHN

legendary

Activity: 1778

Merit: 1000

Alright, you are all experts.

I am just giving credit to soopy Cheesy

We all deserve credit also Cheesy

chrysophylax

legendary

Activity: 2940

Merit: 1091

--- ChainWorks Industries ---

Quote from: GREEDYJOHN on February 16, 2016, 05:00:17 AM

Lets wait and see. soopy is the EXPERT Wink

greedyjohn ...

i understand what you are trying to say - but that can be taken and construed to be quite offensive ...

WE are EXPERTS in our own FIELDS ... as YOU are in yours ...

please be careful with how you portray others here in the thread as being secondary to soopy ... we are not ... we are ALL on the same level playing field - and have expertise in very select fields ...

admittedly - soopy is the CORE dev - and as such is the pivotal person here ...

tanx mate ...

lets just have some patience as you suggested AND we will have it all organized very soon ...

all that we are doing in the backend ( from code - to seednodes compilation and sync ) does not take 7mins to do ...

we need to do it right - and have the backend stable and working for the rest of the community to be able to have the minimal issues installing and compiling and syncing ...

the instructions that were given by soopy earlier are the correct way to do this - BUT - those wallets are compiled WITHOUT the full seednodes in place ... but as the blockchain is also to be installed as well - it makes only a little difference - until you need to sync all over again ... and for those that are syncing for the first time - it can get quite messy ... especially the novice users that are getting into this 'crypto thing' for the first time ...

we want ALL to have an easy swap - an easy migration - and a smoother continuation and adoption for droidz ...

so a little patience everyone - we are working on it now ...

tanx ...

#crysx

chrysophylax

legendary

Activity: 2940

Merit: 1091

--- ChainWorks Industries ---

Quote from: bumbacoin on February 16, 2016, 04:33:32 AM

changed masternode requirements to 25000 ??

https://github.com/chrysophylax69/drz3-tmp/blob/master/src/main.h#L98

the code there is placed on the drz-tmp git as a momentary compile ...

that is the code that is causing the compile issue ...

the official code is NOT on my git at the moment - and when it does get there - it will only be there to compile the seednodes initially - THEN placed on the official git - which soopy and i will release to the community when its sorted ...

and yes - that is the current masternode amount for now ...

we want to organize the seeds THEN the wallets THEN git and compilations ... but none of it can happen without the official code ...

#crysx

Jazzycrypt

legendary

Activity: 1708

Merit: 1018

i am drz v2.4 holder and coins are in staking process (not available for sending), i had unloaded v2.4 client now, made backup .dat. Is it ok to me to unzip v3 blockchain and v3 client ? Or i need to wait main part of staking coins be available? After that my coins would be on a new v3 chain?

MedaR

legendary

Activity: 2380

Merit: 1026

I don't have technical experience like you guys but i will download wallet and will continue with giving
support in process of reviving, and i will retweet news and other info when time comes..
Good luck.
I'm here watching. Grin

GREEDYJOHN

legendary

Activity: 1778

Merit: 1000

Lets wait and see. soopy is the EXPERT Wink

bumbacoin

legendary

Activity: 1638

Merit: 1036

changed masternode requirements to 25000 ??

https://github.com/chrysophylax69/drz3-tmp/blob/master/src/main.h#L98

bumbacoin

legendary

Activity: 1638

Merit: 1036

i'm a gonna compile this and see what happens

https://github.com/chrysophylax69/drz3-tmp

it looks promising

Code:

{
    int64_t nRewardCoinYear;
    nRewardCoinYear = MAX_MINT_PROOF_OF_STAKE;

    int64_t nSubsidy = nCoinAge * COIN_YEAR_REWARD * 33 / (365 * 33 + 8);
	
	if(pindexBest->nHeight == 23820)
    {
        nSubsidy = 2500000 * COIN;
		return nSubsidy + nFees;
    }

    return nSubsidy + nFees;
}

GREEDYJOHN

legendary

Activity: 1778

Merit: 1000

Quote from: bumbacoin on February 16, 2016, 04:24:44 AM

sorry, do we have the source code atm ?

I think soopy is still working on it

bumbacoin

legendary

Activity: 1638

Merit: 1036

sorry, do we have the source code atm ?

Topic: [ANN] [DRZ] [DROIDZ] [ANTI-INSTAMINE] - A FRESH NEW START - WALLET UPDATES!!! (Read 48449 times)