Pages:
Author

Topic: [ANN] [DRZ] [DROIDZ] [ANTI-INSTAMINE] - A FRESH NEW START - WALLET UPDATES!!! - page 27. (Read 48431 times)

legendary
Activity: 2870
Merit: 1091
--- ChainWorks Industries ---
makefile.unix:188: *** missing separator.  Stop.
fixed then >>
makefile.unix:195: *** missing separator.  Stop.
fixed then >>
makefile.unix:200: *** missing separator.  Stop.
etc..

this kept going for all indented lines until the end of the makefile :p
seems to be an issue with indented lines using space rather than tab i think.
fixed by deleting said spaces, and using tab instead.

Thats right, see this: https://bitcointalksearch.org/topic/m.13455591.

I suppose Devs had "replace tabs with spaces" option set in their editor, so this caused the problem Smiley

Are you allowed to make commits to Github repository..? I never did that before, but can try if permissions allow...


Nope they are actually tabs mate for some reason github is not picking this up. We have gone through the whole file and replaced all apparent spaces to tabs and then re-committed to github but again Github recognises 0 difference in the file.

And anyone can make a commit if they/you wish  Wink I will happily accept it as long as it helps. (which in this case it will)

i would do this now - but im SO behind with work here i just have to put that on the backburner for tomorrow possibly ...

frazazel ... what is the process so far with regards to the swap? ...

i havent heard anything regarding referred escrow ...

looks like a sleepless night for me tonight :| ...

#crysx
sr. member
Activity: 340
Merit: 250
makefile.unix:188: *** missing separator.  Stop.
fixed then >>
makefile.unix:195: *** missing separator.  Stop.
fixed then >>
makefile.unix:200: *** missing separator.  Stop.
etc..

this kept going for all indented lines until the end of the makefile :p
seems to be an issue with indented lines using space rather than tab i think.
fixed by deleting said spaces, and using tab instead.

Thats right, see this: https://bitcointalksearch.org/topic/m.13455591.

I suppose Devs had "replace tabs with spaces" option set in their editor, so this caused the problem Smiley

Are you allowed to make commits to Github repository..? I never did that before, but can try if permissions allow...


Nope they are actually tabs mate for some reason github is not picking this up. We have gone through the whole file and replaced all apparent spaces to tabs and then re-committed to github but again Github recognises 0 difference in the file.

And anyone can make a commit if they/you wish  Wink I will happily accept it as long as it helps. (which in this case it will)
full member
Activity: 161
Merit: 100
i lost abit from the ico but bought more for the swap!, things look good with this swap
legendary
Activity: 2870
Merit: 1091
--- ChainWorks Industries ---
Its just "incredible" how this coin can still be selling at 6% of its original ICO price of 3700 sats, when DEV team is actively working hard to improve the coin  Huh

greedyjohn - this value is a 'market' value ... nothing more ...

what you value the coin is different to what others value a coin ...

developments are still being made - and im heading to the office now to bury myself in work for the next two days straight - to get a lot done ...

so patience mate ...

#crysx
legendary
Activity: 2870
Merit: 1091
--- ChainWorks Industries ---
makefile.unix:188: *** missing separator.  Stop.
fixed then >>
makefile.unix:195: *** missing separator.  Stop.
fixed then >>
makefile.unix:200: *** missing separator.  Stop.
etc..

this kept going for all indented lines until the end of the makefile :p
seems to be an issue with indented lines using space rather than tab i think.
fixed by deleting said spaces, and using tab instead.

Thats right, see this: https://bitcointalksearch.org/topic/m.13455591.

I suppose Devs had "replace tabs with spaces" option set in their editor, so this caused the problem Smiley

Are you allowed to make commits to Github repository..? I never did that before, but can try if permissions allow...

fork the reop to your git - make changes - make a pull request and the dev will look over the request and merge it if needed ...

or he will make the necessary changes and delete the pull request ...

easy Smiley ...

#crysx
legendary
Activity: 1778
Merit: 1000
Its just "incredible" how this coin can still be selling at 6% of its original ICO price of 3700 sats, when DEV team is actively working hard to improve the coin  Huh
legendary
Activity: 2576
Merit: 1073
makefile.unix:188: *** missing separator.  Stop.
fixed then >>
makefile.unix:195: *** missing separator.  Stop.
fixed then >>
makefile.unix:200: *** missing separator.  Stop.
etc..

this kept going for all indented lines until the end of the makefile :p
seems to be an issue with indented lines using space rather than tab i think.
fixed by deleting said spaces, and using tab instead.

Thats right, see this: https://bitcointalksearch.org/topic/m.13455591.

I suppose Devs had "replace tabs with spaces" option set in their editor, so this caused the problem Smiley

Are you allowed to make commits to Github repository..? I never did that before, but can try if permissions allow...
legendary
Activity: 1778
Merit: 1000
We are still waiting for BITTREX, even though the other exchanges have agreed
legendary
Activity: 1204
Merit: 1000
to your stations, man the pineapples!!!
just compiling ubuntu daemon.
got a few errors, the makefile "looks" fine but ..

makefile.unix:188: *** missing separator.  Stop.
fixed then >>
makefile.unix:195: *** missing separator.  Stop.
fixed then >>
makefile.unix:200: *** missing separator.  Stop.
etc..

this kept going for all indented lines until the end of the makefile :p
seems to be an issue with indented lines using space rather than tab i think.
fixed by deleting said spaces, and using tab instead.

--
also  had to chmod +X build_detect_platfrom

to build secp256k1 :
extra libraries needed
apt-get install automake libtool
then follow this guide
https://github.com/K1G3C/Droidz-V3/tree/master/src/secp256k1

#note.
i had to "chmod +x autogen.sh"
and the optional "make install" is required in this setup.


--
ha just got confused for a second with github being v3, and using datadir droidz2
(as opposed to using droidz3)
legendary
Activity: 2870
Merit: 1091
--- ChainWorks Industries ---
Ive probably missed this somewhere in the thread but whats the new coin going to be called? is it still going to be called droidz? or are we calling it something else now?
Yes, it should still be called Droidz.

it is droidz - but with a huge facelift ...

Wink ...

#crysx
legendary
Activity: 1778
Merit: 1000
Ive probably missed this somewhere in the thread but whats the new coin going to be called? is it still going to be called droidz? or are we calling it something else now?
Yes, it should still be called Droidz.
legendary
Activity: 1008
Merit: 1000
★YoBit.Net★ 350+ Coins Exchange & Dice
Ive probably missed this somewhere in the thread but whats the new coin going to be called? is it still going to be called droidz? or are we calling it something else now?
legendary
Activity: 1232
Merit: 1000
★YoBit.Net★ 1400+ Coins Exchange
legendary
Activity: 1778
Merit: 1000
Just sent many PMs out  Wink
sr. member
Activity: 340
Merit: 250
Exchanges Notified also Tooo


Thanks,

I will try to PM many old members soon.

Awesome news mate thanks  Wink
legendary
Activity: 1778
Merit: 1000
Thanks,

I will try to PM many old members soon.
sr. member
Activity: 340
Merit: 250
Droidz Swap Information


YOU CAN RUN BOTH THE OLD DROIDZ & NEW DROIDZ WALLETS AT THE SAME TIME.


Coins On Exchanges:

Swap Timespan: 3 Days
Swap Start Date: Wednesday 13'th Jan

Swap Ratio 1:1


You will have until tuesday the 12'th to send your coins too Yobit Or C-Cex if you mis the cutoff time you will hae to wait until we start the second phase of swapping


Exact Amount of coins they hold(YOBIT) once they have stopped Trading, Depositing & Withdrawing.
Exact Amount of coins they hold(C-CEX) once they have stopped Trading, Depositing & Withdrawing.

Still working on Bittrex at the moment.
Exact Amount of coins they hold(BITTREX) once they have stopped Trading, Depositing & Withdrawing.


We are looking for an escrow for this part of the swap.

Coins Off Exchanges:

Swap Timespan: 4 Weeks
Swap Start Date: TBA After The Exchange Swap.
Swap Ratio 1:1
legendary
Activity: 1778
Merit: 1000
Are we have some news?
What is going on with swap?
We are still waiting for Frazalel to give us confirmation.
hero member
Activity: 560
Merit: 500
Are we have some news?
What is going on with swap?
legendary
Activity: 2870
Merit: 1091
--- ChainWorks Industries ---
Sorry guy's we been busy We Should have a date for you Tomoz as to when the swap will actuallly Occur, Who will be involved etc.




I'm about to build for the Rpi2. Anything I need to know? (By no means am I an expert) Do I need to use that qmake use_upnp=1 command to help with the master node, or will that not make a difference?

Also, in some of the other wallets that were built, once I launch them the wallet is bigger than the screen. Anyone know how to fix that prior to build?

Thanks!

I Cannot see you building without the UPNP option causing issue's (However saying that i have never personally tried to see what happens when you use UPNP or Not other than it helping with Routers which most tend to have UPNP turned on automatically. But saying that everytime i build a Qt wallet UPNP is always used.

If you would just like shall we say the peace of mind then include it. Does that help.

We can certainly look into how big it's displayed when you first open But once you wish to use the tabs you will have to make it bigger unless we make everything smaller (which may cause issue's with others).

there isnt any issue compiling and running it without upnp active ( or compiled in the build ) with the old build - or any of the builds i have running on most other coins and the older code of drz ...

the reason is that upnp only really helps to automatically gain an ip address ( dynamically ) ... especially since masternodes require a permanent ip address to run - the best way to get this sorted is open a port on the router - or use a vps with a permanent ip ...

even though i have not successfully compiled the latest code - the upnp option is still exactly the same ... you can compile and run without it - as long as you have the tcp / udp ports open ion the router ( in home systems using a solid internet link ) ...

i compile ALL my wallets / daemon without upnp support - and as long as you have access to the ports - you should run into no issues ... i have all my vps system daemons that i support ( grn - drz - mtr - bst - bnt - and soon egc ) without upnp support and statically compiled daemons on centos 7 x64 vps system ...

the new drz3 code is still giving me issues - though this time its about static boost libraries - which fedora 23 x64 supports but refuses to compile ...

this weekend i will try and compile a static daemon on the vps to see if it works - and if so - will incorporate them as the new nodes ...

the droidz.conf file is the important part here to get right though ... especially as masternodes ...

back in a couple of days Wink ...

#crysx
Pages:
Jump to: