Miner works 5-6 minutes, then crashes at the same settings with ewbf. Gtx 1080x8
Try to lower your OC, had the same problem. DSTM won't run on the same settings with EWBF. It still has hashrate improvement though. 
Topic: [ANN] dstm's ZCash / Equihash Nvidia Miner v0.6.2 (Linux / Windows) - page 108. (Read 224961 times)
November 20, 2017, 05:05:19 AM
November 20, 2017, 02:22:27 AM
4 days and again
2017-11-20 11:36:31|> GPU2 63C Sol/s: 305.2 Sol/W: 2.76 Avg: 311.8 I/s: 163.5 Sh: 1.15 0.98 756 +
2017-11-20 11:36:31|> GPU1 60C Sol/s: 306.1 Sol/W: 2.67 Avg: 314.6 I/s: 165.2 Sh: 1.16 0.98 609 +
2017-11-20 11:36:33|> GPU3 63C Sol/s: 315.2 Sol/W: 2.78 Avg: 314.8 I/s: 168.7 Sh: 1.18 0.98 1092 +
2017-11-20 11:36:40|gpu_id 4 3 0000000545129360 an illegal memory access was encountered
2017-11-20 11:36:40|gpu_id 0 1 0000000510960400 an illegal memory access was encountered
2017-11-20 11:36:40|gpu_id 2 2 0000000510610600 an illegal memory access was encountered
2017-11-20 11:36:40|gpu_id 1 2 00000005454B0200 an illegal memory access was encountered
2017-11-20 11:36:40|gpu 4 unresponsive - check overclocking
2017-11-20 11:36:40|gpu 0 unresponsive - check overclocking
2017-11-20 11:36:40|gpu 2 unresponsive - check overclocking
2017-11-20 11:36:40|gpu 1 unresponsive - check overclocking
2017-11-20 11:36:40|cudaMemcpy 1 failed
2017-11-20 11:36:40|cudaMemcpy 1 failed
2017-11-20 11:36:40|cudaMemcpy 1 failed
2017-11-20 11:36:40|cudaMemcpy 1 failed
2017-11-20 11:36:31|> GPU2 63C Sol/s: 305.2 Sol/W: 2.76 Avg: 311.8 I/s: 163.5 Sh: 1.15 0.98 756 +
2017-11-20 11:36:31|> GPU1 60C Sol/s: 306.1 Sol/W: 2.67 Avg: 314.6 I/s: 165.2 Sh: 1.16 0.98 609 +
2017-11-20 11:36:33|> GPU3 63C Sol/s: 315.2 Sol/W: 2.78 Avg: 314.8 I/s: 168.7 Sh: 1.18 0.98 1092 +
2017-11-20 11:36:40|gpu_id 4 3 0000000545129360 an illegal memory access was encountered
2017-11-20 11:36:40|gpu_id 0 1 0000000510960400 an illegal memory access was encountered
2017-11-20 11:36:40|gpu_id 2 2 0000000510610600 an illegal memory access was encountered
2017-11-20 11:36:40|gpu_id 1 2 00000005454B0200 an illegal memory access was encountered
2017-11-20 11:36:40|gpu 4 unresponsive - check overclocking
2017-11-20 11:36:40|gpu 0 unresponsive - check overclocking
2017-11-20 11:36:40|gpu 2 unresponsive - check overclocking
2017-11-20 11:36:40|gpu 1 unresponsive - check overclocking
2017-11-20 11:36:40|cudaMemcpy 1 failed
2017-11-20 11:36:40|cudaMemcpy 1 failed
2017-11-20 11:36:40|cudaMemcpy 1 failed
2017-11-20 11:36:40|cudaMemcpy 1 failed
November 20, 2017, 01:46:51 AM
Miner works 5-6 minutes, then crashes at the same settings with ewbf. Gtx 1080x8
I got many crashes or reset problems when updating to ver.0.5.4/0.5.5, ver.0.5.3 is quite stable for my rigs but it consumes much CPU usage. I backed to EWBF with lower hashrate but stable and waiting for the improvement on stability.
November 20, 2017, 01:40:59 AM
Miner works 5-6 minutes, then crashes at the same settings with ewbf. Gtx 1080x8
I got many crashes or reset problems when updating to ver.0.5.4/0.5.5, ver.0.5.3 is quite stable for my rigs but it consumes much CPU usage. I backed to EWBF with lower hashrate but stable and waiting for the improvement on stability.
November 20, 2017, 01:40:28 AM
Is EWBF's CUDA Zcash miner still the besti miner out there ?
At least it's stable and my 1080ti +1060 is producing 1k hash rate.
At least it's stable and my 1080ti +1060 is producing 1k hash rate.
November 20, 2017, 01:37:18 AM
I like this miner.
Cards: 4x EVGA 1080 Ti FTW3
Efficiency: ~4.6 Sols/W
If you run this at 2.8 sols/W you must have very cheap electricity costs.
Cards: 4x EVGA 1080 Ti FTW3
Efficiency: ~4.6 Sols/W
If you run this at 2.8 sols/W you must have very cheap electricity costs.
How did you achieve 4.6 Sols/W
, i can't get anything above 3,85 even with heavy OC and very low TPL.If i put mine at 50% power limit +150 core and +350 memory i hit over 4.7SOL/W
At 50% power limit it's possible, I've tried some tests and got around 4.5-4.6 sol/w. But I still push my rig run at power limit around 75-82%, I want to get the better ROI/cost more than that efficiency (the electric cost here is about 0.08$/kwh).
November 20, 2017, 01:05:55 AM
Miner works 5-6 minutes, then crashes at the same settings with ewbf. Gtx 1080x8
November 19, 2017, 06:23:21 PM
Since updating to 0.5.5, on Windows 10 (clean install), when the miner encounters various errors, the error will sometimes appear in a Windows message box and blocks the miner from continuing to mine until I hit "Ok." Was this version accidentally built as Debug instead of Release (i.e. in Visual Studio)?!?!!
I am wondering about the same thing (also ran into this issue recently)
November 19, 2017, 01:10:07 PM
I like this miner.
Cards: 4x EVGA 1080 Ti FTW3
Efficiency: ~4.6 Sols/W
If you run this at 2.8 sols/W you must have very cheap electricity costs.
Cards: 4x EVGA 1080 Ti FTW3
Efficiency: ~4.6 Sols/W
If you run this at 2.8 sols/W you must have very cheap electricity costs.
How did you achieve 4.6 Sols/W
, i can't get anything above 3,85 even with heavy OC and very low TPL.If i put mine at 50% power limit +150 core and +350 memory i hit over 4.7SOL/W
November 19, 2017, 10:42:47 AM
Since updating to 0.5.5, on Windows 10 (clean install), when the miner encounters various errors, the error will sometimes appear in a Windows message box and blocks the miner from continuing to mine until I hit "Ok." Was this version accidentally built as Debug instead of Release (i.e. in Visual Studio)?!?!!
November 19, 2017, 10:13:37 AM
I like this miner.
Cards: 4x EVGA 1080 Ti FTW3
Efficiency: ~4.6 Sols/W
If you run this at 2.8 sols/W you must have very cheap electricity costs.
Cards: 4x EVGA 1080 Ti FTW3
Efficiency: ~4.6 Sols/W
If you run this at 2.8 sols/W you must have very cheap electricity costs.
How did you achieve 4.6 Sols/W
, i can't get anything above 3,85 even with heavy OC and very low TPL. November 19, 2017, 07:27:52 AM
@dstm you rock! I enjoyed using your miner.
You are truly an Nvidia scripting specialist! Hope you will continue to share performance improvements with your miner! Totally happy to pay your dev fees and keep it up!
You are truly an Nvidia scripting specialist! Hope you will continue to share performance improvements with your miner! Totally happy to pay your dev fees and keep it up!
November 18, 2017, 09:26:08 PM
Trying to mine Zclassic on ny1.minez.zone:3054 get the following error:
https://minez.zone
Press CTRL+C to quit ...# zm 0.5.4
# GPU0 + GeForce GTX 970 MB: 4096 PCI: 0:5
# GPU0 connected to: ny1.minez.zone:3054
# GPU0 server set difficulty to: 0000ccccccccccccd0000000...
protocol version 01000020 not supported
Tried 0.5.5, same error
Press CTRL+C to quit ...# zm 0.5.5
# GPU0 + GeForce GTX 970 MB: 4096 PCI: 0:5
# GPU0 connected to: ny1.minez.zone:3054
# GPU0 server set difficulty to: 0000ccccccccccccd0000000...
protocol version 01000020 not supported
https://minez.zone
Press CTRL+C to quit ...# zm 0.5.4
# GPU0 + GeForce GTX 970 MB: 4096 PCI: 0:5
# GPU0 connected to: ny1.minez.zone:3054
# GPU0 server set difficulty to: 0000ccccccccccccd0000000...
protocol version 01000020 not supported
Tried 0.5.5, same error
Press CTRL+C to quit ...# zm 0.5.5
# GPU0 + GeForce GTX 970 MB: 4096 PCI: 0:5
# GPU0 connected to: ny1.minez.zone:3054
# GPU0 server set difficulty to: 0000ccccccccccccd0000000...
protocol version 01000020 not supported
November 18, 2017, 07:44:35 PM
dstm, what to do if overall process is not shown (pic)?
I've tried to relaunch the miner and reboot the system - the same.
I've tried to relaunch the miner and reboot the system - the same.
November 18, 2017, 05:54:35 PM
Just an FYI. Ethos now has dstm-zcash installed. Switched over from ewbf, and I saw nearly 10% increase in sol/s. Thanks!
HFCRacer
HFCRacer
hahahah sure you did; I chose to ignore promotional posts from newbie accounts, saw a 1000 % improvement in the quality and accuracy of posts I'm reading.
November 18, 2017, 05:08:29 PM
Please Add autorestart function, right now if error apeared i got messange from windows what error with Zm.exe and windows ask me press OK
+1 please add code that allows the miner to restart every few hours to prevent crashing.
There is a similar program for ewbf I will find a link. We need to have that monitor dstm miner when it crashed so it can be restarted.
Thanks!
November 18, 2017, 05:02:42 PM
Please Add autorestart function, right now if error apeared i got messange from windows what error with Zm.exe and windows ask me press OK
You can disable those windows: https://www.raymond.cc/blog/disable-program-has-stopped-working-error-dialog-in-windows-server-2008/And then just write a simple loop in your bat file to automatically restart the miner.
November 18, 2017, 04:52:48 PM
There was a windows update that stops the miner from running. Back to EWBF until this is resolved.
. I also experienced a lot of issues after recent windows update. Using zm 0.5.4 , few miners ran into some loop at random times , also had to lower memory clocks on cards although they ran for month straight without any issues . Also performance is lower I was getting around 10170 sole now 10000 and lowerhttps://i.gyazo.com/ad77233355543dd87408b2d6f02e84bc.png
anyone had this loop with version 0.5.4 ?
How do you get that WebGUI like in the picture?
I had a major decrease in Sol/s, my solution was bad extension power/AC-cord
Now I got max Sol/s with 0.5.3 again. November 18, 2017, 01:40:42 PM
Hi DSTM, miner for card AMD? 
November 18, 2017, 12:15:29 PM
Please Add autorestart function, right now if error apeared i got messange from windows what error with Zm.exe and windows ask me press OK
Jump to: