[ANN] dstm's ZCash / Equihash Nvidia Miner v0.6.2 (Linux / Windows) - page 128.

Yarik47

newbie

Activity: 36

Merit: 0

Quote from: Supercoiner111 on October 28, 2017, 12:29:46 PM

Quote from: dstm on October 28, 2017, 06:59:45 AM

Quote from: Supercoiner111 on October 28, 2017, 04:26:06 AM

Great improvement over EWBF of 5% across all my 6 x 1070 however dstm crashes every few moments as the .bat is on loop the miner restarts.

I find it strange why it crashes as with EWBF it is running for well over a month without issues?

This is most likely due to overclocking, you have to readjust it, zm puts a different load on your GPUs.

Ok, I will try to retweak my overclocked settings and try again...

I also very often falls dstm. and very much rejected .. overclock cleaned, does not help ..

Brzina

member

Activity: 74

Merit: 20

I'm back to 0.5.2. Same SOLs, but never crashed with these settings before. I will try 0.5.4 when it's out...

Supercoiner111

full member

Activity: 490

Merit: 100

Quote from: dstm on October 28, 2017, 06:59:45 AM

Quote from: Supercoiner111 on October 28, 2017, 04:26:06 AM

Great improvement over EWBF of 5% across all my 6 x 1070 however dstm crashes every few moments as the .bat is on loop the miner restarts.

I find it strange why it crashes as with EWBF it is running for well over a month without issues?

This is most likely due to overclocking, you have to readjust it, zm puts a different load on your GPUs.

Ok, I will try to retweak my overclocked settings and try again...

Andrey09

newbie

Activity: 176

Merit: 0

Quote from: dstm on October 28, 2017, 09:22:17 AM

I'm somewhat unhappy with 0.5.3, I've discovered 2 bugs so far. If it's unstable for you use 0.5.2 pls. I'm rechecking it's changes.

Friend, could you check performance on gtx1080 ? It's don't have increased performance to compare EWBF miner.

I have advantage on 1060, 1070, 1080ti around 5%, but 1080 have same score or less than ewbf's miner.

And please add uptime timer in browser telemetry.
Tnx you very much.

P.S. GDDR5X trash? Any chance to get some advantage from this type of memory in your miner?

xorrox

newbie

Activity: 1

Merit: 0

Works very weel +6.4% than EWBF on my 1080TI RIGs

Code:

   GPU2 41C  Sol/s: 621.5  Sol/W: 4.24  Avg: 625.4  I/s: 334.4  Sh: 1.61  1.00 25128
   GPU0 48C  Sol/s: 618.7  Sol/W: 4.22  Avg: 623.1  I/s: 333.4  Sh: 1.15  0.99 25131
   GPU1 47C  Sol/s: 623.5  Sol/W: 4.23  Avg: 623.6  I/s: 333.6  Sh: 1.19  1.00 25132
   GPU4 47C  Sol/s: 637.0  Sol/W: 4.25  Avg: 625.4  I/s: 334.7  Sh: 1.32  1.00 25137
   GPU3 48C  Sol/s: 622.1  Sol/W: 4.22  Avg: 622.0  I/s: 333.4  Sh: 1.27  1.00 25138 +
   GPU5 47C  Sol/s: 620.2  Sol/W: 4.24  Avg: 625.5  I/s: 335.4  Sh: 1.41  1.00 25127
   ========= Sol/s: 3743.0 Sol/W: 4.23  Avg: 3745.0 I/s: 2004.9 Sh: 7.95  1.00 25132

Thanks and enjoy your fees!

frequencydip

newbie

Activity: 9

Merit: 0

I'm having issues launching zm, I already created links to the newer versions of the libraries. On Centos 7.3

ln /usr/lib64/libcrypto.so /usr/lib64/libcrypto.so.1.0.0
ln /usr/lib64/libssl.so /usr/lib64/libssl.so.1.0.0

I still get the error

./zm: /lib64/libcrypto.so.1.0.0: version `OPENSSL_1.0.0' not found (required by ./zm)
./zm: /lib64/libssl.so.1.0.0: version `OPENSSL_1.0.0' not found (required by ./zm)

Any help?

dstm, can you compile you miner using the library and not the specific version?

pttinh

full member

Activity: 182

Merit: 100

Could you add the option of selecting mining devices?

dstm

full member

Activity: 350

Merit: 126

I'm somewhat unhappy with 0.5.3, I've discovered 2 bugs so far. If it's unstable for you use 0.5.2 pls. I'm rechecking it's changes.

Brzina

member

Activity: 74

Merit: 20

Same here, have a three restarts on new 0.5.3 ? What is going on ? 0.5.2 worked without problems...

Ryuh

full member

Activity: 282

Merit: 100

Good job on the miner! I used 0.5.2 version for 5-6 days already and its been stable on my rigs.
However after i tried the new 0.5.3 a had a miner crash after some hours of usage.
I didn't change anything, just copied the bat file in the new version.
Can i make a log somehow to report the error?

tutorialevideo

legendary

Activity: 1161

Merit: 1001

Don`t invest more than you can afford to lose

great miner!

preda

sr. member

Activity: 756

Merit: 250

reading very good feedback about this miner still didnt try, i am gonna try for see if is more profitable than ethereum

dstm

full member

Activity: 350

Merit: 126

Quote from: TheHiman on October 28, 2017, 06:15:19 AM

The NAT Problem with lost connections is still not fixed.
I still lost all few minutes the connections behind a NAT-Router in a reconnect-loop.

Could you pls provide more information.
What server are you connecting to - How many GPUs - some output would be helpful, I'll try to reproduce this.

dstm

full member

Activity: 350

Merit: 126

Quote from: Supercoiner111 on October 28, 2017, 04:26:06 AM

Great improvement over EWBF of 5% across all my 6 x 1070 however dstm crashes every few moments as the .bat is on loop the miner restarts.

I find it strange why it crashes as with EWBF it is running for well over a month without issues?

This is most likely due to overclocking, you have to readjust it, zm puts a different load on your GPUs.

dstm

full member

Activity: 350

Merit: 126

Quote from: Andrey09 on October 28, 2017, 01:10:54 AM

On version 0.5.3 (windows) decreased performance on gtx 1080.

0.5.3 has no changes on the GPU side, could you pls provide more information.

dstm

full member

Activity: 350

Merit: 126

Quote from: Coin++ on October 27, 2017, 04:33:11 PM

Can we fix the difficulty in the miner with an option for the command line ?
Can we fix the difficulty for each devices ?
Because the difficulty change very ofen and sometime it very high and I have no share during a long time...

The difficulty is set by the server.

dstm

full member

Activity: 350

Merit: 126

Quote from: Zampollitra on October 27, 2017, 02:41:22 PM

Hi dstm, great miner. You could not fix the sol /s indicator in the webui version in the next version of the miner? The matter is that the average indicator is shown and not real. sorry for my bad English

That's intended. Averages are the most accurate description of your performance.

dstm

full member

Activity: 350

Merit: 126

Quote from: Pustul on October 27, 2017, 02:01:37 PM

Quote from: dstm on October 26, 2017, 02:48:40 PM

New Version 0.5.3
cpu: reduce cpu load
con: fix recon loop
con: network latency measurement
ui: add accepted/rejected shares ratio
ui: add network latency
ui: add information about selected devices

I'm uploading this one earlier than planned since it contains two major improvements - slightly reduced cpu load and a fix for recon - thus it doesn't contain everything you requested/suggested yet.

I've added new stats to the terminal ui. There is more information for share transmission now - it looks now like this:

Code:

Sh:

Can it connect to miningspeed.com now?

Yes, it was fixed on pool side.

dstm

full member

Activity: 350

Merit: 126

Quote from: PickAxe131 on October 27, 2017, 10:33:29 AM

Performance went down for my 1080ti comparing latest 0.5.3 with 0.5.2. switching back to the old version. (windows).

0.5.3 contains no changes on the GPU side.
Could you pls provide more information?

dstm

full member

Activity: 350

Merit: 126

Quote from: dimafern on October 27, 2017, 10:00:28 AM

Great miner, thank you for your job.

The only problem have with API is that it does not have fan speeds listed, only temp.

{
"id": 1,
"result": [
{
"gpu_id": 0,
"temperature": 67,
"sol_ps": 74.85,
"avg_sol_ps": 74.85,
"sol_pw": 1.7976931348623157e+308,
"avg_sol_pw": 1.7976931348623157e+308,
"power_usage": 0,
"avg_power_usage": 0,
"accepted_shares": 0,
"rejected_shares": 0
}
],
"error": null
}

Would be great to add fans % speed to stats.

And I have added this miner to Hive OS Linux distribution https://hiveos.farm so that users will have it right our of the box.

Thank you.

There is a division by zero. Does nvidia-smi show proper pwr consumption?
Fan speed was requested already, I looked it up, nvidia doesn't provide this information. The only information nvidia provides is the level you set your fan speed to (not the actual rpm), this seems useless to me.

Topic: [ANN] dstm's ZCash / Equihash Nvidia Miner v0.6.2 (Linux / Windows) - page 128. (Read 224961 times)