[ANN] dstm's ZCash / Equihash Nvidia Miner v0.6.2 (Linux / Windows) - page 18.

Nvid

newbie

Activity: 39

Merit: 0

I am still a bit confused about the following: Is temp target parameter really temperature limit parameter or will the miner try to reach and maintain this temperature as the word "target" suggests? Thank you.

Indeen do u have in mind the power limit in MSI afterburner?

Nvid

newbie

Activity: 39

Merit: 0

I am using DSTM to all my rigs. I am mining with 55 gpus NVIDIA only.

One of my rig is constantly crashing - "cuda 1 memory failed". It has 6 msi armor 1060 6gbs.

I have tried almost all clocks in order to stabilise it.
Now I am running with no clocks only 80% power limit and it keeps crashing. I noted that when temp limit is set to 70C rig is more stable.

Can you please someone assist me as I am desperate for help. Please help me what can be the problem here?!

Regards,
Hristo

EDIIIZ

newbie

Activity: 3

Merit: 0

Great Miner👍

Deathman20

newbie

Activity: 33

Merit: 0

Quote from: blackjec on April 12, 2018, 11:51:51 PM

Quote from: SpecterHome on April 12, 2018, 10:00:12 PM

Quote from: Jonathan_Swan on April 12, 2018, 12:52:02 PM

Hi Guys, I'm having a few problems with my DSTM miner and wondered if any of you have come across the error before. Unfortunately my mining keeps getting interrupted every minute or so with the following error:

recv failed: 10054

https://ibb.co/f5Dn6n

any help/suggestions would be much appreciated, I have already tried alternate pools so I have ruled that out. I may try another miner but from what I've heard DSTM is the best for equihash so i'd much rather stick with it. Any ideas??

WiFi is evil for mining.

Yes. Wireless connection good for tits, cats, and stupid youtube movies. For stable works - wire only, without variants.

Now if you can avoid it, yes Wireless isn't good for everything. Though I've had a rig, now going on 6+ months, wireless only. Works perfectly fine delivering results.

BTW updated to 0.6 now, really haven't noticed any difference on my side of things.
2x 1060 6GB (80%, 235+ Core, 400+ Mem) average me around 325 Sols each.
1x 1080TI (90%, 200+ Core, 500+ Mem) averages me still around 750 Sols.

Though playing with my 1060's a little more recently since I was able to drop the run temps by almost 10C, figured I could get a little more out of them. Very happy with the setups and up times. 30+ days straight on my 1060 rig before I started tweaking, case switch and windows updates.

alltero

newbie

Activity: 16

Merit: 0

Quote from: dstm on April 15, 2018, 11:17:39 AM

Quote from: Xman79 on April 15, 2018, 01:14:03 AM

Any info about dstm v7 ?

I'm working on it - I hope to be able to release it in 2 weeks.

this is good news!
more power is expected in version v 0.7?

dstm

full member

Activity: 350

Merit: 126

Quote from: froggy007 on April 15, 2018, 06:39:03 AM

Hello dstm.
I use Ethos with 8x Zotac GTX 1080 TI 11Gb Mini and dstm-zcash 0.6.0.1 and trying to use the temp-target function:
dstm-zcash=flags -temp-target 0:65,1:65,2:65,3:65,4:65,5:65,6:65,7:65 and the log says for example gpu0 reached target temperature 65 and the rig restarts
Is the function working ? How to use ? Plese help.

'temp-target' works like this: if the GPU reaches the temp-target zm starts to submit less work to the GPU which causes the GPU-utilization to go down. ZM monitors the temperature and adjusts the amount of submitted work such that the temperature stays around the value you have set.

Some operating systems are setup such that they reboot if the GPU utilization goes down. I'm not sure if this is the case for Ethos but this might be the reason why your rig reboots after one of your GPUs reaches the temp-target.

dstm

full member

Activity: 350

Merit: 126

Quote from: Xman79 on April 15, 2018, 01:14:03 AM

Any info about dstm v7 ?

I'm working on it - I hope to be able to release it in 2 weeks.

dstm

full member

Activity: 350

Merit: 126

Quote from: Mark899 on April 14, 2018, 06:24:38 PM

Is there a viewable saved log for DTSM?

One of my rigs runs Win 7, and the program doesn't hold information in the window as long as Win 10.

I'm getting rejected shares here and there. I wanna button that down, but by the time I realize I have one, it's removed and I can't see which cards I need to back off the OC.

You can enable logfile output by using the '--logfile' option. It's usage is described in 'readme.txt'.
You can also change the size of the terminal window on win7 - you have to right-clicking on the terminal-window-bar and select properties.

froggy007

newbie

Activity: 1

Merit: 0

Hello dstm.
I use Ethos with 8x Zotac GTX 1080 TI 11Gb Mini and dstm-zcash 0.6.0.1 and trying to use the temp-target function:
dstm-zcash=flags -temp-target 0:65,1:65,2:65,3:65,4:65,5:65,6:65,7:65 and the log says for example gpu0 reached target temperature 65 and the rig restarts
Is the function working ? How to use ? Plese help.

nazzer

member

Activity: 238

Merit: 11

Quote from: Xman79 on April 15, 2018, 01:14:03 AM

Any info about dstm v7 ?

Next version is 0.6.1:

Quote from: dstm on April 05, 2018, 09:26:21 AM

Quote from: Coin++ on March 28, 2018, 01:47:51 AM

Quote from: dstm on March 28, 2018, 01:31:57 AM

Quote from: akuci on March 27, 2018, 11:06:33 AM

Quote from: Nvid on March 27, 2018, 06:23:57 AM

Hi DSTM,

Can you please add --PEC option as on EWBF cuda miner.

--pec shows you gpu wat usage as well as sols per watt.

Thank you!

You already have sols per watt, but the power consumption in watts would be nice.
What do you think DSTM?

ZM will report the power consumption of each GPU in 0.6.1

Very nice feature :-).
Any hahsrate improvement is possible ?

Yes, I'm currently testing architectural changes which improve performance on linux systems.
Future releases will contain the changes if there are no stability issues with them.

Xman79

jr. member

Activity: 62

Merit: 1

Any info about dstm v7 ?

Mark899

newbie

Activity: 19

Merit: 0

Is there a viewable saved log for DTSM?

One of my rigs runs Win 7, and the program doesn't hold information in the window as long as Win 10.

I'm getting rejected shares here and there. I wanna button that down, but by the time I realize I have one, it's removed and I can't see which cards I need to back off the OC.

blackjec

newbie

Activity: 20

Merit: 0

Quote from: SpecterHome on April 12, 2018, 10:00:12 PM

Quote from: Jonathan_Swan on April 12, 2018, 12:52:02 PM

Hi Guys, I'm having a few problems with my DSTM miner and wondered if any of you have come across the error before. Unfortunately my mining keeps getting interrupted every minute or so with the following error:

recv failed: 10054

https://ibb.co/f5Dn6n

any help/suggestions would be much appreciated, I have already tried alternate pools so I have ruled that out. I may try another miner but from what I've heard DSTM is the best for equihash so i'd much rather stick with it. Any ideas??

WiFi is evil for mining.

Yes. Wireless connection good for tits, cats, and stupid youtube movies. For stable works - wire only, without variants.

SpecterHome

newbie

Activity: 15

Merit: 0

Quote from: Jonathan_Swan on April 12, 2018, 12:52:02 PM

Hi Guys, I'm having a few problems with my DSTM miner and wondered if any of you have come across the error before. Unfortunately my mining keeps getting interrupted every minute or so with the following error:

recv failed: 10054

https://ibb.co/f5Dn6n

any help/suggestions would be much appreciated, I have already tried alternate pools so I have ruled that out. I may try another miner but from what I've heard DSTM is the best for equihash so i'd much rather stick with it. Any ideas??

WiFi is evil for mining. I change my usb WiFi because of lot "recv failed" to a high power wifi adapter on a wire (about 1 meter from farm) but "recv failed" was still my guest.
Now I connect two my farms with shielded cable cat.6. Much less "recv failed". (1 at week)
Only cable. If you cant connect cable, take you farm to the router.
By the way I use Tp-Link 3600 with OpenWRT on board.

chaostic

newbie

Activity: 22

Merit: 2

Check you're firewall settings, if you run a Asus router or equivalent with any trend micro, or overdone security that will do that man, and yea I've tested all miners dstm/zm is the best.

Jonathan_Swan

newbie

Activity: 2

Merit: 0

Quote from: blackjec on April 12, 2018, 01:31:17 PM

Quote from: Jonathan_Swan on April 12, 2018, 12:52:02 PM

Hi Guys, I'm having a few problems with my DSTM miner and wondered if any of you have come across the error before. Unfortunately my mining keeps getting interrupted every minute or so with the following error:

recv failed: 10054

https://ibb.co/f5Dn6n

any help/suggestions would be much appreciated, I have already tried alternate pools so I have ruled that out. I may try another miner but from what I've heard DSTM is the best for equihash so i'd much rather stick with it. Any ideas??

"10054 - Remote host drop established connection". This is network trouble. You use GPRS/3G/4G?

Thanks for the swift response, I'm currently using USB wifi to connect to the internet as I don't have ethernet available. I'll have a look into trouble shooting the network, thanks again!

blackjec

newbie

Activity: 20

Merit: 0

Quote from: Jonathan_Swan on April 12, 2018, 12:52:02 PM

Hi Guys, I'm having a few problems with my DSTM miner and wondered if any of you have come across the error before. Unfortunately my mining keeps getting interrupted every minute or so with the following error:

recv failed: 10054

https://ibb.co/f5Dn6n

any help/suggestions would be much appreciated, I have already tried alternate pools so I have ruled that out. I may try another miner but from what I've heard DSTM is the best for equihash so i'd much rather stick with it. Any ideas??

"10054 - Remote host drop established connection". This is network trouble. You use GPRS/3G/4G?

Jonathan_Swan

newbie

Activity: 2

Merit: 0

Hi Guys, I'm having a few problems with my DSTM miner and wondered if any of you have come across the error before. Unfortunately my mining keeps getting interrupted every minute or so with the following error:

recv failed: 10054

https://ibb.co/f5Dn6n

any help/suggestions would be much appreciated, I have already tried alternate pools so I have ruled that out. I may try another miner but from what I've heard DSTM is the best for equihash so i'd much rather stick with it. Any ideas??

AzzAz

legendary

Activity: 1030

Merit: 1006

Quote from: AzzAz on April 10, 2018, 03:04:31 PM

Quote from: SpecterHome on April 10, 2018, 12:21:54 PM

Quote from: tbearhere on April 10, 2018, 10:00:01 AM

Can someone please post the hashrate for a 750ti. thx

I mined on 750, but on ewbf (I tried to mine on 660 on dstm and it crashes) and it was around 60 sol.
I think that if dstm will works on it, it will be around 75-80 sol. You will mine 0.01 zec in two weeks.
IMHO

70 sol, 8 card rig is at 550 ish

Fresh reinstall, 388.13 driver ( windows did it) all default, DSTM 6.0 reports 594 +-3 (8 asus 750Ti ), so it's closer to 75. Almost 5%; and will se @ the pool

tbearhere

legendary

Activity: 3164

Merit: 1003

Quote from: blackjec on April 11, 2018, 12:17:52 AM

Quote from: Coin++ on April 10, 2018, 05:17:01 PM

Quote from: tbearhere on April 10, 2018, 10:00:01 AM

Can someone please post the hashrate for a 750ti. thx

55 sol/s for the 750 non Ti at minimal settings (30 W) in Linux.

Ha, I too think that my 750 consumes 38 watt (as say nvidia-smi). But wattmeter show other value - ~60 watt Sad

67 sol/s (with "intensity=1:0.95" in zm.cfg) and 72 with full load. (+135 core, +0 mem)

Also:
gtx950 - 152 sol/s (+200 +500)
gtx1050Ti - 192 (+200 +500)

dstm - rulez Roll Eyes

Thx everyone .... on ewbf I get 72 sols.... so no real improvement with dstm on windows.

Topic: [ANN] dstm's ZCash / Equihash Nvidia Miner v0.6.2 (Linux / Windows) - page 18. (Read 224961 times)